Jump to content

Problemi con OSX86 e chipset VIA

Segnale007

By Segnale007,
in Leopard 10.5

 Share
10 posts in this topic

Recommended Posts

Segnale007
Segnale007
Posted
Posted (edited)

Salve a tutti, sono nuovo nel forum, ho installato mac OsX86 10.4.8 amd final sul mio portatile Acer Aspire 1360 chipset Via-rhine .. Ho problemi con il riconoscimento delle USB e freezing del server sonoro, sono riuscito solo a far andare la scheda di rete trovado le kext giuste ..

 

Vi pasto dmesg e lspci di freebsd che mi funziona correttamente tutto ..

 

dmesg

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	 The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #0: Sat Feb 24 19:54:18 CET 2007
 donpietro@FreeBESTIE.fBSD:/usr/src/sys/i386/compile/MYBOX
ACPI APIC Table: <PTLTD		  APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile AMD Sempron(tm) Processor 2800+ (1600.92-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x10fc0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFL
SH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xc2500800<SYSCALL,NX,MMX+,FFXSR,3DNow+,3DNow>
real memory  = 536281088 (511 MB)
avail memory = 506998784 (483 MB)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xb> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8380 host to PCI bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce FX Go5200> mem 0xc1000000-0xc1ffffff,0xe0000000-0xe7ffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
pci0: <network, ethernet> at device 10.0 (no driver attached)
cbb0: <PCI-CardBus Bridge> irq 17 at device 11.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <PCI-CardBus Bridge> irq 18 at device 11.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fwohci0: <1394 Open Host Controller Interface> mem 0xc0005800-0xc0005fff,0xc0000000-0xc0003fff irq 19 at device 11.2 on pci0
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:0a:e4:05:06:10:20:26
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0a:e4:10:20:26
fwe0: Ethernet address: 02:0a:e4:10:20:26
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
uhci0: <VIA 83C572 USB controller> port 0x1c20-0x1c3f at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x1c40-0x1c5f at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x1c60-0x1c7f at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xc0006400-0xc00064ff at device 16.3 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <VIA VT6202 USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c80-0x1c8f at device 17.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <VIA VT8235> port 0x1000-0x10ff irq 22 at device 17.5 on pci0
pcm0: <VIA Technologies VIA1612A AC97 Codec>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
pci0: <simple comms> at device 17.6 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x1800-0x18ff mem 0xc0006800-0xc00068ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:0a:e4:a6:0c:b9
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd1fff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: vendor 0x04fc USB Wheel Mouse, rev 1.10/1.01, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1600917978 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging limited to 200 packets/entry by default
ad0: 38154MB <TOSHIBA MK4025GAS KA100A> at ata0-master UDMA100
acd0: DVDR <TSSTcorpCD/DVDW TS-L532A/TI50> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TSSTcorp CD/DVDW TS-L532A TI50> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a

 

lspci

00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0a.0 Ethernet controller: Linksys, A Division of Cisco Systems [AirConn] INPROCOMM IP
N 2220 Wireless LAN Adapter (rev 01)
00:0b.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
00:0b.1 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
00:0b.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Lin																			 k-Layer Controller
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80																			 )
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80																			 )
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80																			 )
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC B																			 us Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audi																			 o Controller (rev 50)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport T																			 echnology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Co																			 ntrol
01:00.0 VGA compatible controller: nVidia Corporation NV34M [GeForce FX Go5200] (rev a1)

 

Adesso incollo dmesg di OsX86

 

hi mem tramps at 0xffe00000
PAE enabled
non-INTEL boot process
standard timeslicing quantum is 10000 us
vm_page_bootstrap: 126337 free pages
mig_table_max_displ = 71
Local APIC version not 0x14 as expected
Enabling XMM register save/restore and SSE/SSE2 opcodes
ACPI CA 20060421
AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
PASSED! ...maximum protection of commpage set ALL
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.

using 2621 buffer headers and 2621 cluster IO buffer headers
IOAPIC: Version 0x03 Vectors 64:87
ACPI: System State [S0 S3 S4 S5] (S3)
Security auditing service present
BSM auditing present
disabled
From path: "uuid", 
Waiting for boot volume with UUID 16418AB3-2811-3D43-A7C6-737004A3AB41
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
USB caused wake event (EHCI)
AppleVIAATADriver: VIA 8235 (CMD 0x1f0, CTR 0x3f4, IRQ 14, BM 0x1c80)
AppleVIAATADriver: VIA 8235 (CMD 0x170, CTR 0x374, IRQ 15, BM 0x1c88)
FireWire (OHCI) TI ID 802e PCI now active, GUID 000ae40506102026; max speed s400.
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE@11,1/AppleVIAATARoot/PRIM@0/AppleVIAATADriver/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/TOSHIBA MK4025GAS Media/IOFDiskPartitionScheme/Untitled 5@5
BSD root: disk0s5, major 14, minor 2
Jettisoning kernel linker.
Resetting IOCatalogue.
Matching service count = 2
Matching service count = 2
Matching service count = 2
Matching service count = 2
Matching service count = 2
NBF3: family specific matching fails
NBF7: family specific matching fails
AGP: family specific matching fails
VGA: family specific matching fails
LPCB: family specific matching fails
IDE: family specific matching fails
USB1: family specific matching fails
USB2: family specific matching fails
USB3: family specific matching fails
USB4: family specific matching fails
Z004: family specific matching fails
Z007: family specific matching fails
ILAN: family specific matching fails
pci1022,1103: family specific matching fails
pci1022,1102: family specific matching fails
pci1022,1101: family specific matching fails
pci1022,1100: family specific matching fails
pci104c,802e: family specific matching fails
pci104c,ac8e: family specific matching fails
pci104c,ac8e: family specific matching fails
ethernet: family specific matching fails
pci1106,4204: family specific matching fails
pci1106,2204: family specific matching fails
pci1106,1204: family specific matching fails
pci1106,204: family specific matching fails
Matching service count = 16
Z004: family specific matching fails
ILAN: family specific matching fails
net_pinxue_driver_ViaRhine: found Rhine II.
net_pinxue_driver_ViaRhine: PCI_REV 0x74, PHY ID 0x1.
Z004: family specific matching fails
VIA audio driver modified by pat
VGA: family specific matching fails
Z004: family specific matching fails
ApplePS2Trackpad: Synaptics TouchPad v5.8
net_pinxue_driver_ViaRhine: Ethernet address 00:0a:e4:a6:0c:b9
PPPoE domain init

 

Vi chiedo aiuto, in quanto non pratico di apple, e non so dove cercare le kext per il mio chipset. Sono 4 giorni che cerco, ma non ho trovato nulla di buono ..

 

Grazie a voi tutti ... :thumbsup_anim:

Edited by Segnale007
Link to comment
https://www.insanelymac.com/forum/topic/43515-problemi-con-osx86-e-chipset-via/
Share on other sites
Segnale007
Segnale007
Posted
  • Author
Posted (edited)

Uhm, sono ancora alla ricerca della (spero) possibile soluzione col mio driver audio, avendo cercato un pò sul web e sul forum ho trovato questo link dove ho trovato molti driver, tra cui quello per la mia scheda audio AppleAC97Audio.zip - for VIA 8237R + ALC655 .

 

Ma non mi cambia assolutamente nulla, l audio continua a gracchiare, non so davvero cosa fare e cosa e dove cercare .

 

Ripeto che la mia scheda audio è una :

 

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)

 

Così me la identifica freebsd, e su freebsd funziona perfettamente ....

 

Se qualcuno ha anche una minima idea, mi aiuti, perchè ripeto, non capisco perchè non va ..

 

Grazie a voi tutti ..

Edited by Segnale007
Segnale007
Segnale007
Posted
  • Author
Posted (edited)

E continua il problema con le usb, ho installato i driver generici che ho trovato qui è adesso mi compaiono nuovi messaggi all avvio del kernel

 

USBF:   49.701  Attempting to get EHCI Controller from BIOS
USBF:   49.703  USBLEGCTLSTS value c00c0000
USBF:   49.705  Found USBLEGSUP_ID - value 0x1 - writing OSOwned
USBF:   49.717  acquireOSOwnership done - value 0x1000001
USB caused wake event (EHCI)

 

e dopo come sempre

 

USB1: family specific matching fails
USB2: family specific matching fails
USB3: family specific matching fails
USB4: family specific matching fails

 

E non è tutto qui, se guardate i messaggi del kernel che ho postato sopra, ci sono un bootto di fails su usb pci ide e chi piu' ne ha piu' ne metta ..

 

Help me please ;)

Edited by Segnale007
Segnale007
Segnale007
Posted
  • Author
Posted

Seguendo il consiglio di Midral ho cercato su Google per avere risposte, e ho trovato questa guida dove spiega come disabilitare AppleHDA (che non avevo ) e come installare e attivare AppleAzaliaAudio .

 

Ho scaricato e installato AppleAzaliaAudio.pkg e editato /System/Library/Extensions/AppleAzaliaAudio.kext/Contents/info.plist mettendo id della mia scheda audio, in questo modo

 

 <key>IOHDAudioCodecVendorID</key>
 <string>0x1000-0x10ff</string>

 

Ovviamente tutto questo con esisti negativi, audio continua a gracchiare come sempre ..

 

Vi pasto tutto /System/Library/Extensions/AppleAzaliaAudio.kext/Contents/info.plist

 

<key>SampleOffsetPad</key>
					<integer>0</integer>
			</dict>
			<key>Azalia Generic Codec Driver</key>
			<dict>
					<key>CFBundleIdentifier</key>
					<string>com.apple.driver.AppleAzaliaAudio</string>
					<key>IOClass</key>
					<string>AppleAzaliaAudioCodecGeneric</string>
					<key>IOHDAudioCodecFunctionGroupType</key>
					<integer>1</integer>
					<key>IOProviderClass</key>
					<string>IOHDAudioCodecFunction</string>
			</dict>
			<key>Realtek ALC880/ALC860 Codec Driver</key>
			<dict>
					<key>CFBundleIdentifier</key>
					<string>com.apple.driver.AppleAzaliaAudio</string>
					<key>IOClass</key>
					<string>AppleAzaliaAudioCodecALC880</string>
					<key>IOHDAudioCodecVendorID</key>
					<string>0x1000-0x10ff</string>
					<key>IOProbeScore</key>
					<integer>10000</integer>
					<key>IOProviderClass</key>
					<string>IOHDAudioCodecDevice</string>
			</dict>
	</dict>
	<key>OSBundleLibraries</key>
	<dict>
			<key>com.apple.iokit.IOAudioFamily</key>
			<string>1.1fc9</string>
			<key>com.apple.iokit.IOHDAudioFamily</key>
			<string>1.0.0d1</string>
			<key>com.apple.kpi.bsd</key>
			<string>8.0.0b3</string>
			<key>com.apple.kpi.iokit</key>
			<string>8.0.0b3</string>
			<key>com.apple.kpi.libkern</key>
			<string>8.0.0b3</string>
			<key>com.apple.kpi.mach</key>
			<string>8.0.0b3</string>
	</dict>
</dict>
</plist>

 

Ho anche installato i kext audio di amd via ma nulla dafare, sembra proprio che la mia scheda audio nn voglia andare, eppure ho letto di gente con la mia stessa scheda audio che ha risolto, ma come come ....

 

Spero che qualcuno mi risponda ...

 

Grazie a tutti ..

 Share
Go to topic listing
×
×
  • Create New...