EGPU boot error

[Mohsen Nasrabadi]

Hi all,

 

When I connect the HDMI cable to my external GPU I get some error and stuck at this line, but if I connect the HDMI cable to iGPU my hackintosh can boot.

Intel NUC 11, i7 1165G7,

RX 6650 XT, I know how to spoof GPU but first I need to solve this problem.

Here is my EFI, I appreciate for your help:
https://ufile.io/yyzvqnfz

Edited January 21, 2024 by Mohsen Nasrabadi

[Mohsen Nasrabadi]

After some research and testing using another OS like Linux and Windows, I figured out how to use SSDTTime to bridge external GPU,
I finally got my Hackintosh fully working, here is my system information:

Intel NUC 11, Quad-Core Intel Core i7-1165 G7

AMD RX 6650 XT 8 GB,

32 GB 3200 MHz DDR4.

 

There is only a small issue, when the system is booting you will lose display for a short time until the GPU driver is loaded, that is the same issue with Windows too, I disabled the iGPU, and did not see any improvement.
Also if you connect the HDMI cable to the iGPU, the computer will encounter a problem in the middle of booting and will be rebooted, to prevent that you have to delete the external GPU from the Device Properties.

for those users who have intel NUC 11 and want to use eGPU, I uploaded my EFI, hope it helps.

 

https://github.com/mnetengine/NUC-11

Edited January 24, 2024 by Mohsen Nasrabadi