jronis Posted January 24, 2020 Share Posted January 24, 2020 Tengo el siguiente hardware: Placa Gigabyte z390 gaming x Intel i7 8700 memoria 2666 4x8gb = 32gb samsung m.2 960 nvme MSI Armor RX-570 he probado con el unibest para mojave y cuando inicia desde usb para la instalación desaparece la manzana y aparece una señal de prohibido sobre fondo negro y se para la instalación. Pensé que con este hardware bastante compatible iba a ser más fácil pero ya veo que no. No me importa instalar High Sierra tampoco tiene por qué ser mojave. A ver si alguien me puede echar una mano, saludos Link to comment Share on other sites More sharing options...
MaLd0n Posted January 24, 2020 Share Posted January 24, 2020 veja https://olarila.com/files/Clover.Folder/CLOVER.SERIES.100.200.300.zip Link to comment Share on other sites More sharing options...
kuro4kin Posted January 24, 2020 Share Posted January 24, 2020 8 minutes ago, MaLd0n said: veja https://olarila.com/files/Clover.Folder/CLOVER.SERIES.100.200.300.zip But what about this? https://github.com/acidanthera/OpenCorePkg/blob/master/Docs/AcpiSamples/SSDT-PMC.dsl * Intel 300-series PMC support for macOS * * Starting from Z390 chipsets PMC (D31:F2) is only available through MMIO. * Since there is no standard device for PMC in ACPI, Apple introduced its * own naming "APP9876" to access this device from AppleIntelPCHPMC driver. * To avoid confusion we disable this device for all other operating systems, * as they normally use another non-standard device with "PNP0C02" HID and * "PCHRESV" UID. * * On certain implementations, including APTIO V, PMC initialisation is * required for NVRAM access. Otherwise it will freeze in SMM mode. * The reason for this is rather unclear. Note, that PMC and SPI are * located in separate memory regions and PCHRESV maps both, yet only * PMC region is used by AppleIntelPCHPMC: * 0xFE000000~0xFE00FFFF - PMC MBAR * 0xFE010000~0xFE010FFF - SPI BAR0 * 0xFE020000~0xFE035FFF - SerialIo BAR in ACPI mode * * PMC device has nothing to do to LPC bus, but is added to its scope for * faster initialisation. If we add it to PCI0, where it normally exists, * it will start in the end of PCI configuration, which is too late for * NVRAM support. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 24, 2020 Share Posted January 24, 2020 1 hour ago, kuro4kin said: But what about this? https://github.com/acidanthera/OpenCorePkg/blob/master/Docs/AcpiSamples/SSDT-PMC.dsl * Intel 300-series PMC support for macOS * * Starting from Z390 chipsets PMC (D31:F2) is only available through MMIO. * Since there is no standard device for PMC in ACPI, Apple introduced its * own naming "APP9876" to access this device from AppleIntelPCHPMC driver. * To avoid confusion we disable this device for all other operating systems, * as they normally use another non-standard device with "PNP0C02" HID and * "PCHRESV" UID. * * On certain implementations, including APTIO V, PMC initialisation is * required for NVRAM access. Otherwise it will freeze in SMM mode. * The reason for this is rather unclear. Note, that PMC and SPI are * located in separate memory regions and PCHRESV maps both, yet only * PMC region is used by AppleIntelPCHPMC: * 0xFE000000~0xFE00FFFF - PMC MBAR * 0xFE010000~0xFE010FFF - SPI BAR0 * 0xFE020000~0xFE035FFF - SerialIo BAR in ACPI mode * * PMC device has nothing to do to LPC bus, but is added to its scope for * faster initialisation. If we add it to PCI0, where it normally exists, * it will start in the end of PCI configuration, which is too late for * NVRAM support. nothing new, if u check my topics, we use it for long time here too reinventing the wheel 1 Link to comment Share on other sites More sharing options...
Recommended Posts