Hectorsky Posted August 11, 2016 Share Posted August 11, 2016 Hello Insanely Mac again! I'm building a mac server on the Hardware. Motherboard: Supermicro X7DCL-3 CPU: 2x Intel Xeon E5410 RAM: 8GB DDR2 ECC GPU: NVIDIA GeForce GT 720 PCI-E x8 (Integrated is XGI VOLARI Z9) (The GPU Probably work with NVIDIA Web Driver's) RAID CONTROLLER: LSI SAS1068E CHIPSET: ICH9R (5100 San Clemente) NETWORK CARDS: Intel Pro (probably work with AppleIntel1000e.kext) On this hardware can run Clover installation? Thanks for help. Link to comment https://www.insanelymac.com/forum/topic/314136-hackintosh-server-on-this-hardware/ Share on other sites More sharing options...
Hectorsky Posted August 29, 2016 Author Share Posted August 29, 2016 'should work, yes: Xserve2,1 and MacPro3,1 were based on Hapertown/Penryn CPUs, i.e. same equipment generation. Depending on the exact model, the Intel Pro LAN card may give you a headache. For instance, server/workstation-oriented Intel Pro/1000MT only works in 32bit kernel mode, i.e. SL 10.6 and Lion 10.7 but not beyond. Try and identify the vendor id + device id of your hardware components. The RAID controller should work but OS X may not support all RAID modes. More info on this here. The nVidia GeForce GT 720 will work with nVidia's web drivers. More info here. Thanks Herve! Finally i installed El Capitan on it and this work well I used a MacPro3,1 SMBIOS. Link to comment https://www.insanelymac.com/forum/topic/314136-hackintosh-server-on-this-hardware/#findComment-2271330 Share on other sites More sharing options...
Recommended Posts