AMD Fx with Clover or Chameleon (work with Niresh)

[M4rk]

Hi,

 

This is my computer:

 

Processor AMDFX 8320

with motherboard (UEFI) ASRock 970 Extreme 3 r2

craphic card AMD R9 280x

 

I have successfully installed Niresh with these flags:

 

amdfx -v -x PCIRootUID=1

 

I have updated to 10.9.2, and OSX didn't work. So, i have followed this. And don't work (impossible to boot: the niresh bootloader display and the computer reboot).

 

I want to start again with a new method like Clover or Chameleon for a better control.

 

But they don't work (again).

 

I see the bootload, i write flags, and computer reboot.

 

I have try the same flags i have used for niresh, amdfx isn't know, i have used -amdfx.

 

I have tried : GraphicsEnabler:no/yes, PCIRootUID=1/0, cpus=1,  npci=0×2000, npci=0×3000.

And i have tried different Clover/Chameleon  configurations.

 

 

I have fixed the computer reboot with replace "mach_kernel". I use this, this, and these.

And now:

 

-with chameleon/myhack ihave always this line for each match_kernel: "Data/Stack execution not permitted [...] protections were read-write" infinite repeat.

 

-with clover, the computer reboot after loading drivers

Edited June 9, 2014 by M4rk

[M4rk]

I have try again with Chameleon(r2377) and a new 10.9.3 (download from appstore).

 

I have successfully fix "Data/Stack execution not permitted [...] protections were read-write" with this.

I have replace mach_kernel to my Install device and I have replace the kext folder to system/library/extensions.

 

Now i have this (with -x -v npci=0x2000):

BootCacheControl Unable to open /var/db/BootCache.playlist: 2 No such file or directory
hfs: mounted myharddisk on device disk0s1

I have try many times to wait. 1h . 2h. Nothing. Just these lines on the black screen.

[M4rk]

I have try again with Clover(r2703), 10.9.3, and same kernel that previous post.

 

I have same line (with -x -v npci=0x2000):

BootCacheControl Unable to open /var/db/BootCache.playlist: 2 No such file or directory
hfs: mounted myharddisk on device disk0s1

BUT, after 1-2 min the computer restart. With Chameleon I must turn off.

[M4rk]

For personnel reasons, I can't follow this thread during 2-3 months. But it is not dead, and later I will try to find a real solution.

But if someone read this and if it can help him. I have this idea:

 

1. Install Niresh(10.9.0) with these flag: amdfx -v -x PCIRootUID=1 (maybe change flags).
2. Download and install Mac OS update Combo 10.9.3 The computer will reboot, and should not work.
3. Download this kernel. Unrar it. In it, there is a "mach_kernel" file and a kext folder.
4. Copy the "mach_kernel" file to the root of your hackintosh hard drive.
5. Copy the kext folder content to system/library/extension folder of your hackintosh  hard drive.
6. And should works.

 

For copy the kernel and kext contents to the Hard Disk with the hackintosh who doesn't work, 3 solutions:

 

• Boot to your niresh install drive and use the terminal (in utility).
• Use Linux, Transmac for windows, use OSX on a virtual machine.
• unplug the hard disk from the motherboard, plugin to an other computer (apple computer/hackintosh/Virtual machine) [DO IT IF KNOW WHAT YOU DO. I AM NOT RESPONSIBLE]

(I hope it's help you)