Fa.mulan Posted March 13, 2014 Share Posted March 13, 2014 Ciao a tutti,dopo settimane di scervellamenti, finalmente sono riuscito ad installare Mavericks 10.9 Ho provato con Pandora,ma inutilmente,mi dava una serie di errori e il pc partiva solo in safe mode.Quindi ho usato Niresh,e sino a qui tutto bene,l'installazione è completa e il pc ora si avvia tranquillamente.Però ho dei problemi: 1) Il wifi non funziona,o meglio,penso non ci siano i kext per la mia scheda di rete e non so dove trovarli,poi in seguito allego screen. 2) Non riesco a connettermi con iMessage mi dice : "Si è verificato un errore durante l'attivazione. Riprova." 3) Se il cavo Ethernet non è collegato quando avvio il pc,appena lo attacco non si connette,mi dice che non ha un indirizzo IP.Quindi devo riavviare con il cavo attaccato. 4) Non vedo il sistema reattivo,cioè,ho un hardware abbastanza potente e dovrebbe andare alla perfezione,ma lo trovo comunque poco reattivo. 5) Il mio Masterizzatore CD/DVD non viene riconosciuto,ho un SATA. 6) ho installato gli ultimi aggiornamenti dall'app store e quando si è riavviato rimaneva bloccato al caricamento con la rotellina,quindi ho dovuto reinstallare il sistema. Quindi vorrei sapere se posso fare gli aggiornamenti,o devo bloccarli e non installarli.. Non so neanche se ho tutti i kext necessari per il mio Hardware.Ho un Asus Essentio CM6730 Allego vari screen,se ne servissero altri avvisatemi. Ringrazio in anticipo!! Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/ Share on other sites More sharing options...
Fa.mulan Posted March 14, 2014 Author Share Posted March 14, 2014 upppp Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2003871 Share on other sites More sharing options...
carbo178 Posted March 14, 2014 Share Posted March 14, 2014 Ciao, cercherò di rispondere ai tuoi quesiti Non sapendo qual'è la scheda wifi fai un report con DarwinDumper Ci sono maree di guide e suggerimenti, ma non è detto che risolvi E' normale, a meno di non fare una configurazione di rete manuale Cosa non ti convince in particolare? Probabilmente è connesso ad una porta Sata non Intel, oppure (anche se è strano) non è supportato Quando si aggiorna il sistema a volte è necessario ripristinare certi kext sovrascritti dall'aggiornamento stesso, che metodo di installazione e quali personalizzazioni hai usato? P.S. un up dopo 7 ore non è eccessivo? La prossima volta aspetta almeno 24 ore Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2003881 Share on other sites More sharing options...
Fabio1971 Posted March 14, 2014 Share Posted March 14, 2014 Hardware in firma oppure descriverlo sarebbe di aiuto Fabio Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2003894 Share on other sites More sharing options...
Fa.mulan Posted March 14, 2014 Author Share Posted March 14, 2014 Ho risolto la maggior parte dei problemi da solo,tranne per il masterizzatore e il wifi...Dopo provo a cambiare la porta sata,mentre per il wifi ho usato DarwinDumper,ho fatto Run,e mi ha salvato una serie di file che non so a cosa servano... Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2004025 Share on other sites More sharing options...
carbo178 Posted March 14, 2014 Share Posted March 14, 2014 Leggi la parte Lspci Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2004076 Share on other sites More sharing options...
Fa.mulan Posted March 14, 2014 Author Share Posted March 14, 2014 Quale di questi? Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2004077 Share on other sites More sharing options...
carbo178 Posted March 14, 2014 Share Posted March 14, 2014 Detailed Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2004085 Share on other sites More sharing options...
Fa.mulan Posted March 14, 2014 Author Share Posted March 14, 2014 Poi?esattamente cosa devo cercare? ...... Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2004100 Share on other sites More sharing options...
Fabio1971 Posted March 14, 2014 Share Posted March 14, 2014 In base al modello devi controllare che sia compatibile con Maverick Fabio Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2004109 Share on other sites More sharing options...
Fa.mulan Posted March 14, 2014 Author Share Posted March 14, 2014 Non ti seguo... Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2004112 Share on other sites More sharing options...
Fabio1971 Posted March 14, 2014 Share Posted March 14, 2014 Posta la cartella del DarwinDumper Fabio Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2004116 Share on other sites More sharing options...
Fa.mulan Posted March 14, 2014 Author Share Posted March 14, 2014 03:00.0 Network controller [0280]: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe [1814:3090] Subsystem: Lite-On Communications Inc Device [11ad:7601] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f7300000 (32-bit, non-prefetchable) Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+ Address: 00000000fee00000 Data: 4096 Capabilities: [70] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- TransPend- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ QUESTA E' L'UNICA VOCE NETWORK CHE HO TROVATO... Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2004117 Share on other sites More sharing options...
Fabio1971 Posted March 14, 2014 Share Posted March 14, 2014 Network controller [0280]: Ralink corp. RT3090 Il controller è della Ralik prova a vedere se è compatibile con Maverick Fabio Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2004121 Share on other sites More sharing options...
Fa.mulan Posted March 14, 2014 Author Share Posted March 14, 2014 esattamente come? Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2004131 Share on other sites More sharing options...
carbo178 Posted March 14, 2014 Share Posted March 14, 2014 L'unico kext conosciuto per questa wifi è a 32bit, non credo funzioni per Mavericks; lo trovi qui http://www.osx86.net/files/file/1453-ralink-rt3090-wifi/ Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2004136 Share on other sites More sharing options...
Fa.mulan Posted March 14, 2014 Author Share Posted March 14, 2014 Non va... :// Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2004140 Share on other sites More sharing options...
carbo178 Posted March 14, 2014 Share Posted March 14, 2014 Da quanto ho capito si tratta di una scheda PCI, puoi trovarne una compatibile per sostituirla Link to comment https://www.insanelymac.com/forum/topic/296786-vari-problemi-dopo-installazione/#findComment-2004142 Share on other sites More sharing options...
Recommended Posts