Mobility Radeon HD 4650 LVDS need to sleep

[Alex009988]

I made a mistake in the name of the topic, my video card is ATI Mobility 5850!

While my card works as an internal LCD display, a computer will not sleep, need another patch framebuffer, it should work as LVDS, so http://www.insanelym...howtopic=252061 explain everything, but not every laptop can properly patch.

 

mac-admin:~ admin$ /Users/admin/Downloads/radeon_bios_decode < /Users/admin/Desktop/Turks.bin
ATOM BIOS Rom:
SubsystemVendorID: 0x1025 SubsystemID: 0x030a
IOBaseAddress: 0x2000
Filename: BR35516.001
BIOS Bootup Message:
BROADWAY Pro with DDR3 800m/625e	

PCI ID: 1002:68a1
Connector at index 0
Type [@offset 45414]: LVDS (7)
Encoder [@offset 45418]: INTERNAL_UNIPHY (0x1e)
i2cid [@offset 45506]: 0x93, OSX senseid: 0x4
Connector at index 1
Type [@offset 45424]: DisplayPort (10)
Encoder [@offset 45428]: INTERNAL_UNIPHY2 (0x21)
i2cid [@offset 45529]: 0x91, OSX senseid: 0x2
Connector at index 2
Type [@offset 45434]: HDMI-A (11)
Encoder [@offset 45438]: INTERNAL_UNIPHY1 (0x20)
i2cid [@offset 45556]: 0x90, OSX senseid: 0x1
Connector at index 3
Type [@offset 45444]: VGA (1)
Encoder [@offset 45448]: INTERNAL_KLDSCP_DAC1 (0x15)
i2cid [@offset 45583]: 0x92, OSX senseid: 0x3
mac-admin:~ admin$

 

00 04 00 00 04 06 00 00 00 71 00 00 21 03 02 04
00 04 00 00 04 06 00 00 00 73 00 00 11 02 01 01
00 00 00 00 04 06 00 00 00 71 00 00 21 03 02 00
00 04 00 00 04 06 00 00 00 71 00 00 11 02 01 03
00 04 00 00 04 06 00 00 00 71 00 00 22 05 04 02
00 04 00 00 04 06 00 00 00 71 00 00 12 04 03 01

It has been patched Zonalis, that there is need to change? Because of this, the laptop goes to sleep, but don't wakes up.

[Alex009988]

AAAAAAAA BBBBBBBB CCCC DDDD EE FF GG HH

A = Connector type
B = Control Flags
C = Features
D = ???
E = Transmitter
F = Encoder
G = HotPlugID
H = Sense ID

I do not know how to take out the BIOS these values​​?, I find something is missing. Just realized the value of H is taken from. And I do not like the number 73. It is in my opinion in all the rows must be the same, 73 or 71. And Zonalis did not fit, if only I have 4 ports. Or then you have two last lines of neutral earthing??.

 

0000000 02 00 00 00 40 00 00 00 09 01 00 00 10 00 00 04 - LVDS
0000010 00 08 00 00 00 02 00 00 00 01 00 00 11 02 January 1 - HDMI

I have the other four lines cleared.

And in hibernate was different to go. The monitor was turned off immediately, and then the whole system. Prior to that, turned off all together (once), after a few seconds after pressing the slip. From hibernate turns out good. That is, this platch clever than the last. Now in hibernate goes as in windows, at first screen and then everything else.

 

EDID ( Extended Display Identification Data) Report

Vendor/Product Identification:
Monitor Name : 
Monitor Serial Number : 
Manufacturer Name :  CMO
Product Id :  1807
Serial Number :  0
Week Of Manufacture :  2
Year Of Manufacture :  2009
EDIDVersion :  V1.3
Number Of Extension Flag :  0
Display parameters:
Video Input Definition :  Digital Signal
DFP1X Compatible Interface :  False
Max Horizontal Image Size :  410 mm
Max Vertical Image Size :  230 mm
Max Display Size :  18,5 Inches
Power Management and Features:
Standby :  Not Supported
Suspend :  Not Supported
ActiveOff :  Not Supported
Video Input :  1
sRGB Default ColorSpace :  False
Default GTF :  Not Supported
Prefered Timing Mode :  True
Gamma/Color and Etablished Timings:
Display Gamma :  2,2
Red :  x = 0,624 - y = 0,361
Green :  x = 0,337 - y = 0,607
Blue :  x = 0,164 - y = 0,086
White :  x = 0,313 - y = 0,329
Etablished Timings : 
Display Type :  RGB Color Display
Standard Timing:

Preferred Detailed Timing:
Pixel Clock :  138,65 Mhz
Horizontal Active :  1920 pixels
Horizontal Blanking :  160 pixels
Horizontal Sync Offset :  48 pixels
Horizontal Sync Pulse Width :  32 pixels
Horizontal Border :  0 pixels
Horizontal Size :  408 mm
Vertical Active :  1080 lines
Vertical Blanking :  31 lines
Vertical Sync Offset :  3 lines
Vertical Sync Pulse Width :  5 lines
Vertical Border :  0 lines
Vertical Size :  230 mm
Input Type :  Digital Separate
Interlaced :  False
VerticalPolarity :  False
HorizontalPolarity :  False
Monitor Range Limit:
Maximum Vertical Frequency :  0 Hz
Minimum Vertical Frequency :  0 Hz
Maximum Horizontal Frequency :  0 KHz
Minimum Horizontal Frequency :  0 KHz
Maximum Pixel Clock :  0 MHz
Stereo Display:
Stereo Display :  Normal display (no stereo)
RAW Data:
0x00  00 FF FF FF FF FF FF 00 0D AF 07 18 00 00 00 00
0x10  02 13 01 03 80 29 17 78 0A E6 05 9F 5C 56 9B 2A
0x20  16 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
0x30  01 01 01 01 01 01 29 36 80 A0 70 38 1F 40 30 20
0x40  35 00 98 E6 10 00 00 18 00 00 00 FE 00 4E 31 38
0x50  34 48 36 2D 4C 30 32 0A 20 20 00 00 00 FE 00 43
0x60  4D 4F 0A 20 20 20 20 20 20 20 20 20 00 00 00 FE
0x70  00 4E 31 38 34 48 36 2D 4C 30 32 0A 20 20 00 35

With chameleon 1902 of a dream does not come out (sudo pmset hibernatemode 0). Windows swill longer goes to sleep. A MAC almost immediately. Perhaps because of this problem, though unlikely.