Problems with Radeon 5770

[lubie japka]

Hi. it`s my config:

 

Abit AB9 Pro (P965) http://www.abit.com.tw/page/pl/motherboard...p;fMTYPE=LGA775

C2D E4300

SouthBridge ICH8R

JMicron JMB363 i Silicon Image 3132 Controller

XFX Radeon 5770 1GB (2x dvi, 2x hdmi).

Realtek RTL8168B/8111B

 

 

I install iAtkos s3 (10.6.3) with: Intel Sata, JMicron Sata, NTFS 3G, Voodoo PS/2, Realtec 8168, Chameleon RC4, Graphics Enabler.

 

It`s OK, but after install I have 1024x768 resolution only.

 

Next step is install 10.6.6 combo, install Kabyl`s Chameleon RC5 r700, copy my bios to HDD:/Extra

 

 

I add to my com.apple.Boot.plist:

 

<key>GraphicsEnabler</key>

<string>Yes</string>

<key>UseAtiROM</key>

<string>yes</string>

 

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Kernel</key>

<string>mach_kernel</string>

<key>Kernel Flags</key>

<string></string>

<key>Boot Graphics</key>

<string>Yes</string>

<key>Quiet Boot</key>

<string>No</string>

<key>Timeout</key>

<string>5</string>

<key>GraphicsEnabler</key>

<string>Yes</string>

<key>UseAtiROM</key>

<string>yes</string>

</dict>

</plist>

 

After reboot I see this always:

 

If

 

ALWAYS. I try install only combo update (without copying bios itp), but always after restart is the same text.

 

 

 

 

What I`m doing wrong?

 

 

 

 

BTW. Sorry, my English is not good.

[jwdavid81]

i can tell you right now you have to flash that card to get it to work. The Dev id is wrong. Also, you need to put the Snowleopard graphics update on, which is 10.6.4 and above i believe.

Look for a file on Netkas.org called m57707.rom thats what i used to flash it.

My device id is 0x68B81002

You will have to use some flags with the flash utility to suppress errors that say its a different device ID or whatever.. what kinda card is it? (i.e. manufacturer, edition.. etc.. what kind of ports?)