Dopler Posted January 9, 2011 Share Posted January 9, 2011 Hello everyone, I have a Hp Pavilion dv5 and would like to install Snow Leopard Could you explain step by step how to install OSX? I have read in a guide must also Flashing the BIOS .. this is mandatory? What kind of retail should I use? I downloaded Snow_Leopard_10.6.1-10.6.2_SSE2_SSE3_Intel_AMD_by_Hazard This is the retail right? I write features for my pc: Motherboard: Quanta 3603 Chipset: Intel PM45 Processor: Intel Mobile Core 2 Duo T6400 @ 2000MHz Physical Memory: 4096MB (2 x 2048 DDR2-SDRAM) 4.00 Gb Ram 32-bit operating system. ID motherboard: <DMI> Hewlett-Packard HP Pavilion dv5 Notebook PC Bus Type: Intel AGTL + Bus Type Dual DDR2 SDRAM NVIDIA GeForce 9200M GS 512 MB dedicated Broadcom BCM4310 USB Controller PCI RTL8168C/8111C Realtek PCI-E Gigabit Ethernet Adapter (PHY: Realtek RTL8211/8212) PCI IEEE 1394 Bus host controllers ADA IDE / ATAPI USB Controller Thank you all and sorry for the bad English:) Link to comment https://www.insanelymac.com/forum/topic/242313-help-hp-pavilion-dv-5/ Share on other sites More sharing options...
Dopler Posted January 9, 2011 Author Share Posted January 9, 2011 up Link to comment https://www.insanelymac.com/forum/topic/242313-help-hp-pavilion-dv-5/#findComment-1618863 Share on other sites More sharing options...
titivtt33 Posted January 10, 2011 Share Posted January 10, 2011 hello ,i have tried hazard i have dv5 1130ef notbook but incertitud result ,i have tried Iatkos _S3 V2 to good but if you want 64 or 32 options you must follow the option when you intall it ,follow the different post on DV5 in this forum and after you great like me or u want more explication go to 0SX86 Wiki good luck (i am a french man sorry for my english) Link to comment https://www.insanelymac.com/forum/topic/242313-help-hp-pavilion-dv-5/#findComment-1619403 Share on other sites More sharing options...
Dopler Posted January 10, 2011 Author Share Posted January 10, 2011 Finally, thank you very much for your reply. I have already searched the internet if my computer had all the requirements needed to install Mac OSX and you can do, I just wanted to have some guidance and clarification. Necessarily have to flash the bios? is an operation that I want to avoid is too dangerous. I just searched on the OSx86 wiki and I found this for my pc: HP Pavilion DV5 Install Method: iDeneb v1.3 10.5.5 Intel Centrino 2 Duo T9600@2.8GHz: Working Nvidia Geforce 9600GT 512mb: Working Sound: IDT Working. HP Pavilion DV5 (dv5-1215ee) Install Method: iPC OSx86 Universal 10.5.6 Intel Core 2 Duo T6400@2.0GHz: WORKING 2.00GB DDR2 800 MHz: WORKING Nvidia GeForce 9200M GS 512 mb: WORKING IDT High Definition Sound: WORKING (Including headphones and microphone) HP Webcam: WORKING DVD Combo Drive: WORKING 4 USB Ports: WORKING IEEE 1394: WORKING Broadcom WiFi: WORKING Realtek 8186c Ethernet: WORKING HDMI: WORKING Apparently it works perfectly (and I knew this already) but I wanted to have a guide to follow step by step to install Mac OSx on this computer Up there, says Install Method: iDeneb v.1.3 and another says iPC OSx86 Universal 10.5.6 Which should I use? It means that I installed with iDeneb! Who can help me find the step by step guide? Link to comment https://www.insanelymac.com/forum/topic/242313-help-hp-pavilion-dv-5/#findComment-1619509 Share on other sites More sharing options...
titivtt33 Posted January 11, 2011 Share Posted January 11, 2011 Finally, thank you very much for your reply.I have already searched the internet if my computer had all the requirements needed to install Mac OSX and you can do, I just wanted to have some guidance and clarification. Necessarily have to flash the bios? is an operation that I want to avoid is too dangerous. I just searched on the OSx86 wiki and I found this for my pc: HP Pavilion DV5 Install Method: iDeneb v1.3 10.5.5 Intel Centrino 2 Duo T9600@2.8GHz: Working Nvidia Geforce 9600GT 512mb: Working Sound: IDT Working. HP Pavilion DV5 (dv5-1215ee) Install Method: iPC OSx86 Universal 10.5.6 Intel Core 2 Duo T6400@2.0GHz: WORKING 2.00GB DDR2 800 MHz: WORKING Nvidia GeForce 9200M GS 512 mb: WORKING IDT High Definition Sound: WORKING (Including headphones and microphone) HP Webcam: WORKING DVD Combo Drive: WORKING 4 USB Ports: WORKING IEEE 1394: WORKING Broadcom WiFi: WORKING Realtek 8186c Ethernet: WORKING HDMI: WORKING Apparently it works perfectly (and I knew this already) but I wanted to have a guide to follow step by step to install Mac OSx on this computer Up there, says Install Method: iDeneb v.1.3 and another says iPC OSx86 Universal 10.5.6 Which should I use? It means that I installed with iDeneb! Who can help me find the step by step guide? use idenb is verry good the best for dv5 i have test it install:suppli police ,X11,chipset ICH fix XX,apple smbiosMacBook,powermenagement,iousbfamily,poweroff fix,after rebootgo use -x for install graphic card after downlaoded kext to kexts.com and take differents kext for your hardware get kext utility on same site for grafic card take nvdarwin ,for sound take woodooHDA and ethernet take realtek 8168 or r1000 . goodluck Link to comment https://www.insanelymac.com/forum/topic/242313-help-hp-pavilion-dv-5/#findComment-1620301 Share on other sites More sharing options...
lёfechka Posted June 26, 2011 Share Posted June 26, 2011 Look this DV-5 Link to comment https://www.insanelymac.com/forum/topic/242313-help-hp-pavilion-dv-5/#findComment-1703856 Share on other sites More sharing options...
Recommended Posts