T00CLUTCH Posted April 3, 2010 Share Posted April 3, 2010 I was able to install iAtkos v7 on VMWare Workstation 7(with no thanks to the guides on here -.-) and I installed the driver for my ethernet port. I chose to use my PC's IP to connect to the internet but I have no connection. Do I have to manually set that up or something? It looks complicated for people with no knowledge or experience with IPs. That is really my only problem, aside from the fact that I forgot to install a graphics enabler for my card Link to comment https://www.insanelymac.com/forum/topic/214580-iatkos-v7-vmware/ Share on other sites More sharing options...
ArgVega Posted April 3, 2010 Share Posted April 3, 2010 iATKOS v7 recognized my network connection just fine, you are using the NAT feature, right? I don't know if its compatible, I use bridged in wrks 7 with no problems at all and it recognizes its connected. The only down side is you can't use it on public hubs, because you can't register 2 ips with the same mac address. Pot the specs and what customizations you made to iATKOS so we can help you out Link to comment https://www.insanelymac.com/forum/topic/214580-iatkos-v7-vmware/#findComment-1441271 Share on other sites More sharing options...
Recommended Posts