can't install snow need dsdt

[allowen]

Hi all,

first thanks to all the community for all the good work that allows me to run leopard on my computer.

 

I'd like now to install snow leopard but i need a dsdt.aml

I tried many patchers but i got errors that i don't know how to fix

 

here is the errors i get when trying to compile with DSDTSE

 

Intel ACPI Component Architecture
ASL Optimizing Compiler version 20090730 [Aug 12 2009]
Copyright © 2000 - 2009 Intel Corporation
Supports ACPI Specification Revision 4.0

/Library/DSDT/DSDTFiles/dsdt.dsl  2728:                                                 }
Error    4095 -                             syntax error, unexpected '}', expecting '(' ^ 

/Library/DSDT/DSDTFiles/dsdt.dsl  2743:                                                             }
Error    4095 -                                         syntax error, unexpected '}', expecting '(' ^ 

/Library/DSDT/DSDTFiles/dsdt.dsl  2748:                                                             }
Error    4095 -                                         syntax error, unexpected '}', expecting '(' ^ 

/Library/DSDT/DSDTFiles/dsdt.dsl  2765:                                                                 }
Error    4095 -                                             syntax error, unexpected '}', expecting '(' ^ 

/Library/DSDT/DSDTFiles/dsdt.dsl  2770:                                                                 }
Error    4095 -                                             syntax error, unexpected '}', expecting '(' ^ 

/Library/DSDT/DSDTFiles/dsdt.dsl  2780:                                                                     }
Error    4095 -                                                 syntax error, unexpected '}', expecting '(' ^ 

/Library/DSDT/DSDTFiles/dsdt.dsl  2785:                                                                     }
Error    4095 -                                                 syntax error, unexpected '}', expecting '(' ^ 

/Library/DSDT/DSDTFiles/dsdt.dsl 12049: [*** iASL: Read error on source code temp file /Library/DSDT/DSDTFiles/dsdt.src ***]
Error    4095 -                        ^ syntax error, unexpected $end

ASL Input:  /Library/DSDT/DSDTFiles/dsdt.dsl - 12050 lines, 416129 bytes, 4875 keywords
Compilation complete. 8 Errors, 0 Warnings, 0 Remarks, 0 Optimizations

 

what do I need to change to get no errors

here is my dsdt extract

 

 

If I try to install SL without dsdt.aml I get problem with my bios, I got to clear CMOS and set my bios again to boot my computer.

 

Here are my specs :

 

Mobo : Asus M3-HD HDMI (nForce 750a)

Proc : AMD Phenom 9950 BE quad core

Ram : 4Go DDR2 800MHz

GPU : 9800GX2 sparkle

HDD : Sata drives

DVD : LG Sata

 

Can someone please help me getting these errors out or at least helping me understand them so I can fix them and try to get SL running

 

Thanks in advance

 

 

Wen.

dsdt.zip

[allowen]

I tried to replace all the } by ( according to the errors log, but still no way to compile.

After all was replaced, I had newer errors that i corrected (replaced by what was expected) after 12 recompiling (and 12 sets of new errors) I still end with this one :

 

/Library/DSDT/DSDTFiles/dsdt.dsl 12049: [*** iASL: Read error on source code temp file /Library/DSDT/DSDTFiles/dsdt.src ***]

Error 4095 - ^ syntax error, unexpected $end

 

Please help

[jannes3000]

Hi,

 

I'm also running Snow Leo on a Phenom and I'm using the attached DSDT.aml ... I don't know if it is helpful, but I hope so .

 

Jannes

Jannes_DSDT.aml.zip

[allowen]

Thanks, but I think that this one is for your motherboard, not mine, but I'll give it a try.

 

If someone could help me understanding these errors... I could then correct them myself

[jannes3000]

Thanks, but I think that this one is for your motherboard, not mine, but I'll give it a try.

 

If someone could help me understanding these errors... I could then correct them myself

 

I didn't download it especially for my Motherboard... the same DSDT worked on my "test-board" by Foxconn aswell. I put it into: /Extra/ , aswell as the com.apple.Boot.plist , the Extensions folder & mkext and the smbios.plist

 

Since I started "hacking" with Snow Leopard I'm not sure how it was done in Leopard, but maybe there are some differences. I did the following: Cameleon Bootloader RC4 / EFI Studio / Vanilla Kernel / DSDT.aml / kext/mkext with Kext Utility ... thats pretty much all the stuff I used.

 

But yeah the same snowleo start-harddisk I created, isn't working with my old AM2+ MSI mainboard so i guess maybe its up to your motherboard.

[allowen]

thanks again, i'll try it tonight and report here if it's working to install snow leo

[allowen]

Just tried to run the installer and....

It works

thanks a lot for this file, i did not try to install the system because i've got some work to do tonight, but I got prety much time on tomorrow for this.

 

before installing, I'll try to adapt this file to make most of my hardware run with it (lan, sound, and maybe gfx)

 

I'm really glad I've got now new things to fix coming (one click install is not fun to me) but I would have also appreciated understanding why this damn dsdt.dsl did not compile.

 

So, for my personnal knowledge, if someone could help me understanding this thing, I'd be really grateful.