hrokilshi Posted January 24, 2010 Share Posted January 24, 2010 Pals, Is there a patched snow kernel for i3 cpu available currently? I have a gigabyte ga-h55m-ud2h mobo with i3 530 cpu. now stuck at the preboot stage reboot immediately after Chameleon or BOOT-132 loaded. any idea? thanks. Link to comment https://www.insanelymac.com/forum/topic/208782-patched-kernel-for-i3-cpu/ Share on other sites More sharing options...
roaminggnome Posted January 26, 2010 Share Posted January 26, 2010 Pals, Is there a patched snow kernel for i3 cpu available currently? I have a gigabyte ga-h55m-ud2h mobo with i3 530 cpu. now stuck at the preboot stage reboot immediately after Chameleon or BOOT-132 loaded. any idea? thanks. bump Link to comment https://www.insanelymac.com/forum/topic/208782-patched-kernel-for-i3-cpu/#findComment-1396108 Share on other sites More sharing options...
ocpistol Posted January 30, 2010 Share Posted January 30, 2010 also Looking for this anyone get it to work? Link to comment https://www.insanelymac.com/forum/topic/208782-patched-kernel-for-i3-cpu/#findComment-1399609 Share on other sites More sharing options...
Kale R. Posted February 1, 2010 Share Posted February 1, 2010 bump! Link to comment https://www.insanelymac.com/forum/topic/208782-patched-kernel-for-i3-cpu/#findComment-1401018 Share on other sites More sharing options...
roaminggnome Posted February 8, 2010 Share Posted February 8, 2010 bump! :: whistles :: Link to comment https://www.insanelymac.com/forum/topic/208782-patched-kernel-for-i3-cpu/#findComment-1406325 Share on other sites More sharing options...
MOCKBA80 Posted February 26, 2010 Share Posted February 26, 2010 I am running 10.6.2 on GA-H55M-S2H with i530 with only sound not working. i530 needs Anv kernel and it works only in 32bit. I installed using Hazard selecting Anv kernel. Upon first boot you need to specify "busratio=20 arch=x86_32 -v". Now to enable networking you will need RealtekR1000SL kext and to get PS2 keyboard working VoodooPS2. I used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] from http://www.tonymacx86.com to get RealtekR1000SL. Now if I could get sound working it would be cool. Tried VoodooHDA that added bunch of digital in/outs but no sound. So I tried ALC 888 (aka HDAEnabler) - no luck either, so I did ALC888b that should be the best bet, but I couldn't figure out how to create DSDT.aml for my board. Any ideas? Link to comment https://www.insanelymac.com/forum/topic/208782-patched-kernel-for-i3-cpu/#findComment-1418809 Share on other sites More sharing options...
Quantum003 Posted April 22, 2010 Share Posted April 22, 2010 I am running 10.6.2 on GA-H55M-S2H with i530 with only sound not working. i530 needs Anv kernel and it works only in 32bit. I installed using Hazard selecting Anv kernel. Upon first boot you need to specify "busratio=20 arch=x86_32 -v". Now to enable networking you will need RealtekR1000SL kext and to get PS2 keyboard working VoodooPS2. I used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] from http://www.tonymacx86.com to get RealtekR1000SL. Now if I could get sound working it would be cool. Tried VoodooHDA that added bunch of digital in/outs but no sound. So I tried ALC 888 (aka HDAEnabler) - no luck either, so I did ALC888b that should be the best bet, but I couldn't figure out how to create DSDT.aml for my board. Any ideas? So are you needing to type "busratio=20" before each boot or has your patched kernel elimated that extra, annoying step? I'm still having to type it each time and I've tried everything under the sun to get it taken care of once and for all... Link to comment https://www.insanelymac.com/forum/topic/208782-patched-kernel-for-i3-cpu/#findComment-1453670 Share on other sites More sharing options...
Recommended Posts