AppleVIAATA.kext x hdd data corruption

[Leandro Pinheiro]

Hi folks,

 

I had installed 10.4.6 JaS by native install method, my mobo is a Foxconn P4M800P7MA-RS2 with VIA P4M800 + 8237R Plus chipset.

 

When i load AppleVIAATA the has run on full speed but i had several erros and can not load any application.

 

When i use "sudo -s" for the first time every thing works great, if I boot, or tri "sudo -s" again, I have a messeges on "bash" saing that file "/var/run/sudo/my_user_name_here" is still created and can not be created, after this "maildrop" messeges pop in "bash" prompt.

 

To resolve that I load with "-s" option, and go to "single user", run "fsck -sy" and "mount -uw /" and delete manualy the folder "/var/run/sudo/my_user_name_here"

 

If i work with GenericATA all except speed of HDD work great!!!

 

S3 Unicrome works great but no CI ou QE, Display at 1280x1024x32

On board RTL8139 ok

HDD SATA (kext loaded) not tested yet

USB not work

Sound Work with left channel only, and MIC works, not tested with AppleAC97.kext by Macgril

ATA has this problem, described here.

 

EDIT:

 

In IDE0 master is a Sansung SP0802N HDD

in IDE1 master is a DVD-RW Driver from Samsung

My AppleVIAATA.kext version is 1.0.2

 

Sorry for my bad English, but i`m Brasilian and Word Cup is to my Country!!!

 

My Portuguese post is listed above, with full board specs!

 

Thank you for reading this one!

 

Opa pessoal,

 

Tenho o 10.4.6 JaS instalado na placa Foxconn P4M800P7MA-RS2 com o Chipset VIA P4M800 Pro + 8237R Plus, toda vida que eu ativo o AppleVIAATA.kext comecam a ocorrer corrupcoes no HD.

 

por exemplo se eu entro com "sudo -s", ou com outro programa que acessa o HD como root, por exemplo o "Account dentro do System Preferences", ai o HD enlouquece, na proxima vez que tento usar o "sudo -s" ele me retorna uma mensagem que avisa que o arquivo "/var/run/sudo/nome_do_usuario" ja existe e que nao de ser criado.

 

Dai pra frente sao varia mensagens de maildroop na console e eu nao consigo mais abrir nenhum aplicativo.

 

Alguem ja passou por isso?

 

Os dados da placa mae sao estes:

 

Processor: Intel® Smithfield, Pentium® 4, Celeron D, Socket T (LGA775) processors

Chipset: VIA P4M800 Pro + 8237R Plus

Front Side Bus: 533/800MHz front side bus (FSB)

Memory: Single channel DDR 400 x 2, Single channel DDRII 533 x 2

VGA on Die: Integrated

Expansion Slots: 1 x AGP 8x, 3 x PCI

IDE: ATA133 x 2

Serial ATA(SATA)/RAID: Serial ATA x 2 with RAID 0, 1, JBOD

Audio: 5.1 channel, AC’97 interface, Realtek ALC653

LAN: 10/100M, Realtek RTL8100C (PCI)

IEEE1394: N/A

Back Panel I/O Ports: 1 x PS/2 keyboard

1 x PS/2 mouse

1 x parallel

1 x COM

4 x USB 2.0

1 x RJ45

1 set 5.1 channel Audio jacks (3 jacks)

1 x VGA

Internal I/O Connectors: 2 x USB 2.0 headers, support 4 ports

1 x Intruder

1 x IrDA header

1 x CD IN

1 x speaker header (reserve)

1 x COM2 header

1 x AUX-IN

1 x Front Audio

1 x Front panel

1 x SPDIF out header

1 x Buzzer

BIOS Features: LPC-4Mb, ACPI 1.0b, APM 1.2, PnP 1.0a, SMBIOS 2.3, USB 2.0, WfM 2.0

Support CD: Chipset Drivers, DirectX, RAID Driver, USB 2.0 Driver, Audio Driver, Network Driver, Adobe Reader, SuperUtilities, Norton Internet Security

Standards/Manageability: USB 2.0, WfM 2.0, DMI 2.0, WOL by PME, LPC 1.1 Interface

Special Features: STR (Suspend-to-Ram); STD (Suspend-to-Disk); SuperRecovery, SuperBoot, SuperBIOS-Protect, SuperLevel, SuperStep, SuperLogo, SuperUpdate

Form Factor: Micro ATX (9.6” x 9.6”)