crybbio Posted September 17, 2009 Share Posted September 17, 2009 Salve a tutti:spero di trovare un aiuto per il mio problema. Ho provato innumerevoli volte ad installare iDeneb nelle sue varie versioni (1.4, 1.5, 1.58), utilizzando varie opzioni, vari kernell, ho provato a cambiare la gestione del disco in ACHI, ma niente: ogni volta che finisce l'installazione (tra l'altro sempre senza alcun problema) e faccio ripartire il sistema, alla partenza di MacOS mi si blocca la schermata SEMPRE nello stesso punto (allego il file). Non so più cosa fare. Qualcuno sa aiutarmi? Allego il report di Everest: Motherboard: CPU DualCore Intel Core 2 Duo E8600, 3333 MHz (10 x 333) Motherboard name Asus P5QC (2 PCI, 3 PCI-E x1, 1 PCI-E x16, 4 DDR2 DIMM, 2 DDR3 DIMM, Audio, Gigabit LAN, IEEE-1394) Motherboard Chipset Intel Eaglelake P45 System Memory 4 GB (DDR3-1333 DDR3 SDRAM) DIMM2: Corsair XMS3 DHX CM3X2G1333C9DHX 2 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 592 MHz) (7-7-7-19 @ 518 MHz) (6-6-6-16 @ 444 MHz) DIMM4: Corsair XMS3 DHX CM3X2G1333C9DHX 2 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 592 MHz) (7-7-7-19 @ 518 MHz) (6-6-6-16 @ 444 MHz) BIOS AMI (04/27/09) Video card: NVIDIA GeForce 8800 GTX (768 MB) Audio: Creative SB X-Fi XtremeMusic/Platinum Sound Card Realtek ALC1200 @ Intel 82801JB ICH10 - High Definition Audio Controller Storage: Controller IDE Intel® ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26 Controller IDE Intel® ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20 Storage Controller Marvell 61xx RAID Controller Floppy disk Generic Floppy disk Disk drive Generic USB CF Reader USB Device Disk drive Generic USB MS Reader USB Device Disk drive Generic USB SD Reader USB Device Disk drive Generic USB SM Reader USB Device Disk drive MAXTOR S TM3320820A SCSI Disk Device (320 GB, 7200 RPM, Ultra-ATA/100) Disk drive MAXTOR STM31000340AS (1000 GB, 7200 RPM, SATA-II) Disk drive WDC WD1500AHFD-00RAR5 (150 GB, 10000 RPM, SATA) Disk drive WDC WD1500AHFD-00RAR5 (150 GB, 10000 RPM, SATA) Disk drive WDC WD5000AAKS-00YGA0 (465 GB, IDE) Optical drive HL-DT-ST BDDVDRW GGC-H20L Optical drive PHILIPS SPD6004P SCSI CdRom Device Partitioni: [ Unit #1 - WDC WD1500AHFD-00RAR5 (139 GB) ] #1 (Active) NTFS C: (Win XP) 0 MB 143078 MB [ Unit #2 - WDC WD5000AAKS-00YGA0 (465 GB) ] #1 (Active) HFS+ 374515 MB 102422 MB #2 NTFS I: (Video e Imm) 7 MB 322288 MB #3 HFS+ 322296 MB 52219 MB [ Unit #3 - MAXTOR STM31000340AS (931 GB) ] #1 NTFS F: (Video) 7 MB 511993 MB #2 NTFS G: (Dati) 512001 MB 358403 MB #3 NTFS H: (BACKUP) 870404 MB 83462 MB [ Unit #4 - WDC WD1500AHFD-00RAR5 (139 GB) ] #1 NTFS D: (Vista) 0 MB 91887 MB #2 NTFS E: (Giochi) 91887 MB 51199 MB [ Unit #5 - MAXTOR STM3320820A (298 GB) ] #1 NTFS J: (Ghost & Musica) 7 MB 305234 MB Riassumendo gli hard disk: ho 4 hard disk SATA e 1 lettore DVD collegati al IDE Controller Intel ICH10. In dischi differenti ho installati XP, Vista e la HFS partizione per Leopard. 1 hard disk Ultra ATA 133 (solo dati) e 1 lettore DVD collegati al Marvell 61xx RAID Controller. Lan: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller Devices: Controller FireWire AT&T/Lucent IEEE1394 FireWire Controller (PHY: Agere LFW3226/3227) Controller FireWire Pinnacle Systems OHCI Compliant FireWire Controller Controller USB1 Intel 82801JB ICH10 - USB Universal Host Controller Controller USB1 Intel 82801JB ICH10 - USB Universal Host Controller Controller USB1 Intel 82801JB ICH10 - USB Universal Host Controller Controller USB1 Intel 82801JB ICH10 - USB Universal Host Controller Controller USB1 Intel 82801JB ICH10 - USB Universal Host Controller Controller USB1 Intel 82801JB ICH10 - USB Universal Host Controller Controller USB2 Intel 82801JB ICH10 - USB2 Enhanced Host Controller Controller USB2 Intel 82801JB ICH10 - USB2 Enhanced Host Controller Link to comment https://www.insanelymac.com/forum/topic/187200-problema-avvio-dopo-installazione/ Share on other sites More sharing options...
crybbio Posted September 17, 2009 Author Share Posted September 17, 2009 UP! Link to comment https://www.insanelymac.com/forum/topic/187200-problema-avvio-dopo-installazione/#findComment-1270667 Share on other sites More sharing options...
marcohujaychou Posted September 17, 2009 Share Posted September 17, 2009 Salve a tutti:spero di trovare un aiuto per il mio problema. Ho provato innumerevoli volte ad installare iDeneb nelle sue varie versioni (1.4, 1.5, 1.58), utilizzando varie opzioni, vari kernell, ho provato a cambiare la gestione del disco in ACHI, ma niente: ogni volta che finisce l'installazione (tra l'altro sempre senza alcun problema) e faccio ripartire il sistema, alla partenza di MacOS mi si blocca la schermata SEMPRE nello stesso punto (allego il file).Non so più cosa fare. Qualcuno sa aiutarmi? Allego il report di Everest: Motherboard: CPU DualCore Intel Core 2 Duo E8600, 3333 MHz (10 x 333) Motherboard name Asus P5QC (2 PCI, 3 PCI-E x1, 1 PCI-E x16, 4 DDR2 DIMM, 2 DDR3 DIMM, Audio, Gigabit LAN, IEEE-1394) Motherboard Chipset Intel Eaglelake P45 System Memory 4 GB (DDR3-1333 DDR3 SDRAM) DIMM2: Corsair XMS3 DHX CM3X2G1333C9DHX 2 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 592 MHz) (7-7-7-19 @ 518 MHz) (6-6-6-16 @ 444 MHz) DIMM4: Corsair XMS3 DHX CM3X2G1333C9DHX 2 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 592 MHz) (7-7-7-19 @ 518 MHz) (6-6-6-16 @ 444 MHz) BIOS AMI (04/27/09) Video card: NVIDIA GeForce 8800 GTX (768 MB) Audio: Creative SB X-Fi XtremeMusic/Platinum Sound Card Realtek ALC1200 @ Intel 82801JB ICH10 - High Definition Audio Controller Storage: Controller IDE Intel® ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26 Controller IDE Intel® ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20 Storage Controller Marvell 61xx RAID Controller Floppy disk Generic Floppy disk Disk drive Generic USB CF Reader USB Device Disk drive Generic USB MS Reader USB Device Disk drive Generic USB SD Reader USB Device Disk drive Generic USB SM Reader USB Device Disk drive MAXTOR S TM3320820A SCSI Disk Device (320 GB, 7200 RPM, Ultra-ATA/100) Disk drive MAXTOR STM31000340AS (1000 GB, 7200 RPM, SATA-II) Disk drive WDC WD1500AHFD-00RAR5 (150 GB, 10000 RPM, SATA) Disk drive WDC WD1500AHFD-00RAR5 (150 GB, 10000 RPM, SATA) Disk drive WDC WD5000AAKS-00YGA0 (465 GB, IDE) Optical drive HL-DT-ST BDDVDRW GGC-H20L Optical drive PHILIPS SPD6004P SCSI CdRom Device Partitioni: [ Unit #1 - WDC WD1500AHFD-00RAR5 (139 GB) ] #1 (Active) NTFS C: (Win XP) 0 MB 143078 MB [ Unit #2 - WDC WD5000AAKS-00YGA0 (465 GB) ] #1 (Active) HFS+ 374515 MB 102422 MB #2 NTFS I: (Video e Imm) 7 MB 322288 MB #3 HFS+ 322296 MB 52219 MB [ Unit #3 - MAXTOR STM31000340AS (931 GB) ] #1 NTFS F: (Video) 7 MB 511993 MB #2 NTFS G: (Dati) 512001 MB 358403 MB #3 NTFS H: (BACKUP) 870404 MB 83462 MB [ Unit #4 - WDC WD1500AHFD-00RAR5 (139 GB) ] #1 NTFS D: (Vista) 0 MB 91887 MB #2 NTFS E: (Giochi) 91887 MB 51199 MB [ Unit #5 - MAXTOR STM3320820A (298 GB) ] #1 NTFS J: (Ghost & Musica) 7 MB 305234 MB Riassumendo gli hard disk: ho 4 hard disk SATA e 1 lettore DVD collegati al IDE Controller Intel ICH10. In dischi differenti ho installati XP, Vista e la HFS partizione per Leopard. 1 hard disk Ultra ATA 133 (solo dati) e 1 lettore DVD collegati al Marvell 61xx RAID Controller. Lan: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller Devices: Controller FireWire AT&T/Lucent IEEE1394 FireWire Controller (PHY: Agere LFW3226/3227) Controller FireWire Pinnacle Systems OHCI Compliant FireWire Controller Controller USB1 Intel 82801JB ICH10 - USB Universal Host Controller Controller USB1 Intel 82801JB ICH10 - USB Universal Host Controller Controller USB1 Intel 82801JB ICH10 - USB Universal Host Controller Controller USB1 Intel 82801JB ICH10 - USB Universal Host Controller Controller USB1 Intel 82801JB ICH10 - USB Universal Host Controller Controller USB1 Intel 82801JB ICH10 - USB Universal Host Controller Controller USB2 Intel 82801JB ICH10 - USB2 Enhanced Host Controller Controller USB2 Intel 82801JB ICH10 - USB2 Enhanced Host Controller prova cosi': installa macdrive su windows portarsi in /system/library/extensions/ e cancellare AppleACPIPlatform e AppleAPIC e metti quelli che ti posto avviare in cpus=1 una volta partito installarle con kexthelper AppleAPIC.kext.zip AppleACPIPlatform.kext.zip Link to comment https://www.insanelymac.com/forum/topic/187200-problema-avvio-dopo-installazione/#findComment-1270699 Share on other sites More sharing options...
Recommended Posts