Jump to content
6 posts in this topic

Recommended Posts

I am not certain by reading posts here that it is at all possible to have OSX 10.4.6 recognize my PCI slots.

I have an Echo Mia sound card to be identified if possible but the PCI slots are not even showing on my sys.

 

Anyone confirm if this is even possible?

 

Thank you,

K

 

My specs:

CPU(s)

Number of CPUs 2 (1 Physical)

CPU#1 APIC ID = 0

Name Intel Pentium 4

Code Name Prescott

Specification Intel® Pentium® 4 CPU 2.80GHz

Family / Model / Stepping F 3 3

Extended Family / Model 0 0

Package mPGA-478

Core Stepping C0

Technology 90 nm

Supported Instructions Sets MMX, SSE, SSE2, SSE3

CPU Clock Speed 2793.1 MHz

Clock multiplier x 14.0

Front Side Bus Frequency 199.5 MHz

Bus Speed 798.0 MHz

L1 Data Cache 16 KBytes, 8-way set associative, 64 Bytes line size

L1 Trace Cache 12 Kuops, 8-way set associative

L2 Cache 1024 KBytes, 8-way set associative, 64 Bytes line size

L2 Speed 2793.1 MHz (Full)

L2 Location On Chip

L2 Data Prefetch Logic yes

L2 Bus Width 256 bits

CPU#2 APIC ID = 1

CPU Name Intel Pentium 4 (logical unit)

 

Mainboard and chipset

Motherboard manufacturer Dell Computer Corp.

Motherboard model 0N6381,

BIOS vendor Dell Computer Corporation

BIOS revision A02

BIOS release date 11/08/2004

Chipset Intel i865P/PE/G/i848P rev. A2

Southbridge Intel 82801EB (ICH5) rev. 02

Sensor chip SMSC 1404

FSB Select 800 MHz

Performance Mode disabled

 

Memory

DRAM Type DDR-SDRAM

DRAM Size 1280 MBytes

DRAM Frequency 199.5 MHz

FSB:DRAM 1:1

CAS# Latency 3.0 clocks

RAS# to CAS# 3 clocks

RAS# Precharge 3 clocks

Cycle Time (TRAS) 8 clocks

# of memory modules 2

Module 0 Kingston DDR PC3200 - 1024 MBytes

Module 1 MOSEL DDR PC3200 - 256 MBytes

 

Software

Windows version Microsoft Windows XP Home Edition Service Pack 1 (Build 2600)

DirectX version 8.1b

  • 4 months later...
×
×
  • Create New...