problem:jas 10.4.6 installation - toshiba notebook

[wabbit]

Hi guys and experts of this forum.

 

I would gladly appreciate some help here as I have exhausted all means of installing 10.4.6 Jas DVD install.

 

 

I am running a toshiba notebook tecra 9100. Specs: sse2 Pentium M 1.6 Ghz - 1 Gig Ram.

 

I managed to successfully install a deadmoo 10.4.1 image onto a second partition via VMware method.

afterwhich i cannot update to 10.4.3 successfully. (Can't run keynote)

 

Hence I downloaded a version of Jas DVD install which i cannot get to install properly. I downloaded it "10.4.6.install.dvd" - 4,698,669,056 bytes.

 

burnt onto a dvd-r and loaded it. did the -v -x platform=acpi and platform=pcx86 (did not got a kernel panic)

 

tried VMware - same problem.

 

A error log is here:

 

....

extension "com.apple.driver.appleacpithermal" has no kernel dependency.

extension "com.apple.driver.appleac97audiointelICH" has no kernel dependency.

extension "com.apple.driver.appleac97audio" has no kernel dependency.

AppleintelPIIXPATA: ICH3 ATA/100 (CMD 0x170, CTR 0x374, IRQ 15, BM 0xcfa8)

AppleintelPIIXPATA: ICH3 ATA/100 (CMD 0x1f0, CTR 0x3f4, IRQ 14, BM 0xcfa0)

IOPCCardBridge::Start failed

IPOCCard notice: AdjustResourceinform: Unknown error code 0xffffffff

IPOCCardbridge::start failed

Firewire (OHCI) TI ID 8023 PCI now active, GUID 0000390000267d48, max speed s400

Got boot device = IOService:/AppleACPIPlatformexpert/PCI0@0/AppleACPIPCI/FNC1@1f, 1/appleintelPIIXATARoot/ IDE1@1/appleintelPIIXPA

BSD root: disk1s3, major 14, minor 15

pid 1 exited (signal 0, exit 1)panic(cpu 0 caller0x0032BFBF) : Init died

State at last exception:

 

Debugger called: <panic>

backtrace, format - frame: Return address (4 potential args on stack)

0x13e13ed8: 0x128ara (0x3b9dcc 0x13e13efc 0x130c94 0x0)

ox13e13f18: 0x32bfbf (0x3d6e48 0x496000 0x1 0x197c6d)

0x13e13f58: 0x32c028 (0x2b3cdac 0x0 0x29a1670 0x27a3604)

0x13e13f78: 0x36b988(0x2b3cdac 0x29a162c 0x29a1670 0x0)

0x13e13fd8: 0x196fc6 (0x29a8ac8 0x29a9ac8 0x49b800 0x13e13a50) no mapping exists for frame pointer

backtrace terminated- invalid frame pointer 0xbffff9b8

 

kernel version:

darwin kernel version 8.4.1.

 

I would greatly appreciate if i can get any help on this. Thank you very much in advance.

 

 

PS: anyone has a link to Jas latest 10.4.6 update? I suspect this could be the problem. Thanks

[BuXb]

Are you still in need of these IOACPIFamily.kext and AppleACPIPlatform.kext from 10.4.5 to solve the problem described above? Then drop me a line.

 

Wouldn't it be Ok to upload a little package with these XTs and post a link (if need be even not clickable) in here ??

-------------

I had the same prob on my Toshiba Satellite P-100 102 after updating from 10.4.5 to 10.4.6. The strange thing is the same procedure worked before. The only difference is that I recently installed a BIOS update (BIOS from 1.2 to 1.7) ..