trigaum Posted July 13, 2009 Share Posted July 13, 2009 First, sorry for the english, it is not my native language! So, i´ve download the latest iATKOS version and installed on my PC dual boot with Windows 7 via EasyBCD. UNtil there all good. Then pc reboot, iniciate leopard for the first time, welcome screen a everything fine. The system is beatiful, fast and easy to use. All drivers are working fine (video audio keyboard mouse lan). So i navigate the internet and listen to music and then the PC freezes!! Reboot, all again. Sometimes it freezes at apple silver screen. Sometimes it freezes ramdomly, at any time, any place, even when the system is idle. I have tried the MAXMEM trick and so many other tricks i found around internet, but none works for me. Below i´ll list all drivers i used in install and my pc specs. Hope you guys help me. I´m in the end of the tunnel, desperate, driving crazy! My system: Pentium Dual Core E2160 @ 1.80GHz Mobo Gigabyte GA-945GCM-S2L 2GB Mem DDR2 667 (2x1GB) running at dual channel (ive already tried take off one of the memories) HD Samsung HD250HJ ATA Device Realtek Ethernet Azalia Audio Geforce 7300GT What i choose at iATKOS installation: Chameleon v1 DSDT SMBIOS EFI Apple Decrypter Stock Kernel (no voodoo, but ive tried with voodoo 9.5) Stock ACPI Disabler OHR Remove TyMCE Nvidia EFI VGA/DVI + Nv Enabler (i use VGA/VGA port here, but there´s no that option, but the GF has the DVI out) SATA/IDE driver Intel Speedstap Cardbus USB Azalia Sound Voodoo PS/2 Realtek 8139 ________________________________________________________________________________ _________ SO, what i have to put or take off here to have a good and stable MAC OSx86? thank you very much! Any help is aprecciated. see ya! Link to comment https://www.insanelymac.com/forum/topic/174666-leopard-1057-iatkos-v7-needing-your-help-guys/ Share on other sites More sharing options...
alisabki Posted September 8, 2009 Share Posted September 8, 2009 First, sorry for the english, it is not my native language! So, i�ve download the latest iATKOS version and installed on my PC dual boot with Windows 7 via EasyBCD. UNtil there all good. Then pc reboot, iniciate leopard for the first time, welcome screen a everything fine. The system is beatiful, fast and easy to use. All drivers are working fine (video audio keyboard mouse lan). So i navigate the internet and listen to music and then the PC freezes!! Reboot, all again. Sometimes it freezes at apple silver screen. Sometimes it freezes ramdomly, at any time, any place, even when the system is idle. I have tried the MAXMEM trick and so many other tricks i found around internet, but none works for me. Below i�ll list all drivers i used in install and my pc specs. Hope you guys help me. I�m in the end of the tunnel, desperate, driving crazy! My system: Pentium Dual Core E2160 @ 1.80GHz Mobo Gigabyte GA-945GCM-S2L 2GB Mem DDR2 667 (2x1GB) running at dual channel (ive already tried take off one of the memories) HD Samsung HD250HJ ATA Device Realtek Ethernet Azalia Audio Geforce 7300GT What i choose at iATKOS installation: Chameleon v1 DSDT SMBIOS EFI Apple Decrypter Stock Kernel (no voodoo, but ive tried with voodoo 9.5) Stock ACPI Disabler OHR Remove TyMCE Nvidia EFI VGA/DVI + Nv Enabler (i use VGA/VGA port here, but there�s no that option, but the GF has the DVI out) SATA/IDE driver Intel Speedstap Cardbus USB Azalia Sound Voodoo PS/2 Realtek 8139 ________________________________________________________________________________ _________ SO, what i have to put or take off here to have a good and stable MAC OSx86? thank you very much! Any help is aprecciated. see ya! I think you should select VoodooHDA driver for your sound driver because this mobo has ALC 662 codec that VodooHDA will support it instead of Azalia. Azalia will working only for output channel. and also your Network driver. Just select RT1000 because this mobo has RTL8111C chipset instead of Realtek 8139. RT1000 will covering a few chipset includes this RTL8111C chipset. ................// just my opinion. however this option still didn't resolve your problem because its just a sound and network stuff even sometimes when its crash, it will hang the systems. ........................// im using the same mobo as yours (GA-945GCM-S2L) and have tried so many version of osx86 before with this mobo. Always get lucky with all version except one (i don't remember what version it is). Running smoothly with this iAtkos v7 once then crash on system overload (after a few overclock). Until now, when i try to install it (on the same mobo), it never success. i have tried all tricks to get it boot again but my lucky days is over. maybe after a little searching and some work (and time) i will get it running again............// or someone will do a favor? Link to comment https://www.insanelymac.com/forum/topic/174666-leopard-1057-iatkos-v7-needing-your-help-guys/#findComment-1257101 Share on other sites More sharing options...
trigaum Posted September 14, 2009 Author Share Posted September 14, 2009 I think you should select VoodooHDA driver for your sound driver because this mobo has ALC 662 codec that VodooHDA will support it instead of Azalia. Azalia will working only for output channel.and also your Network driver. Just select RT1000 because this mobo has RTL8111C chipset instead of Realtek 8139. RT1000 will covering a few chipset includes this RTL8111C chipset. ................// just my opinion. however this option still didn't resolve your problem because its just a sound and network stuff even sometimes when its crash, it will hang the systems. ........................// im using the same mobo as yours (GA-945GCM-S2L) and have tried so many version of osx86 before with this mobo. Always get lucky with all version except one (i don't remember what version it is). Running smoothly with this iAtkos v7 once then crash on system overload (after a few overclock). Until now, when i try to install it (on the same mobo), it never success. i have tried all tricks to get it boot again but my lucky days is over. maybe after a little searching and some work (and time) i will get it running again............// or someone will do a favor? I download the iPC version of OsX and it worked very well! Im using OSX since august 10th! It´s running smooth and doing all updates. And i have dual boot with Windows 7. Thanks for your tips! so, what happens exactly with your boot system? you cant boot the DVD after of before installation? have you another OS trying dual boot? maybe i can help. i´ll PM you my email. Link to comment https://www.insanelymac.com/forum/topic/174666-leopard-1057-iatkos-v7-needing-your-help-guys/#findComment-1265136 Share on other sites More sharing options...
Jogii Posted September 14, 2009 Share Posted September 14, 2009 First, sorry for the english, it is not my native language! So, i�ve download the latest iATKOS version and installed on my PC dual boot with Windows 7 via EasyBCD. UNtil there all good. Then pc reboot, iniciate leopard for the first time, welcome screen a everything fine. The system is beatiful, fast and easy to use. All drivers are working fine (video audio keyboard mouse lan). So i navigate the internet and listen to music and then the PC freezes!! Reboot, all again. Sometimes it freezes at apple silver screen. Sometimes it freezes ramdomly, at any time, any place, even when the system is idle. I have tried the MAXMEM trick and so many other tricks i found around internet, but none works for me. Below i�ll list all drivers i used in install and my pc specs. Hope you guys help me. I�m in the end of the tunnel, desperate, driving crazy! My system: Pentium Dual Core E2160 @ 1.80GHz Mobo Gigabyte GA-945GCM-S2L 2GB Mem DDR2 667 (2x1GB) running at dual channel (ive already tried take off one of the memories) HD Samsung HD250HJ ATA Device Realtek Ethernet Azalia Audio Geforce 7300GT What i choose at iATKOS installation: Chameleon v1 DSDT SMBIOS EFI Apple Decrypter Stock Kernel (no voodoo, but ive tried with voodoo 9.5) Stock ACPI Disabler OHR Remove TyMCE Nvidia EFI VGA/DVI + Nv Enabler (i use VGA/VGA port here, but there�s no that option, but the GF has the DVI out) SATA/IDE driver Intel Speedstap Cardbus USB Azalia Sound Voodoo PS/2 Realtek 8139 ________________________________________________________________________________ _________ SO, what i have to put or take off here to have a good and stable MAC OSx86? thank you very much! Any help is aprecciated. see ya! Hi I have same board with VoodooHDA drivers and running perfect for me. Did you check temperature of your motherboard? ----------------- Tears http://www.techbabu.com Link to comment https://www.insanelymac.com/forum/topic/174666-leopard-1057-iatkos-v7-needing-your-help-guys/#findComment-1265158 Share on other sites More sharing options...
trigaum Posted September 15, 2009 Author Share Posted September 15, 2009 yes i did. i think the problem should be with the iATKOS version. ive installed the iPC version and it´s running smooth thankyou! Link to comment https://www.insanelymac.com/forum/topic/174666-leopard-1057-iatkos-v7-needing-your-help-guys/#findComment-1266515 Share on other sites More sharing options...
Recommended Posts