higgsy Posted June 16, 2009 Share Posted June 16, 2009 Hi My system is configured as follows a. IDE Drive - Working 10.1 install kalaway b. SATA HDD - FAT 32 for my data c. SATA HDD I just installed the iDeneb iso to disk c). Everything appeared to go ok. After rebooting though I get no bootloader. I have set disk c to be the first bootable device in the bios however it skips straight to the next disk which is my 10.1 install It's almost as if it does not recognise it. any help is appreciated. Tim Link to comment https://www.insanelymac.com/forum/topic/170954-ideneb-no-bootloader-showing/ Share on other sites More sharing options...
higgsy Posted June 16, 2009 Author Share Posted June 16, 2009 Hi My system is configured as follows a. IDE Drive - Working 10.1 install kalaway b. SATA HDD - FAT 32 for my data c. SATA HDD I just installed the iDeneb iso to disk c). Everything appeared to go ok. After rebooting though I get no bootloader. I have set disk c to be the first bootable device in the bios however it skips straight to the next disk which is my 10.1 install It's almost as if it does not recognise it. any help is appreciated. Tim Having a look around I reckon I may have forgotten to set the partition as active. (I'm not using a bootloader, just the bios to pick which disk to boot from.) I guess that if it's not bootable it will go to the next disk which is bootable, which may explain what is occurring. I'll give it a try when I get home tonight Link to comment https://www.insanelymac.com/forum/topic/170954-ideneb-no-bootloader-showing/#findComment-1178796 Share on other sites More sharing options...
Recommended Posts