iDeneb v1.4_10.5.6 Something missing

[anhkhoi]

Hi all you guru,

 

I had successfully installed iDeneb v1.4_10.5.6 on my system. The installation was smooth. When I reboot the computer, it hang at white apple screen with the spinning circle. If I boot with options, it hang at "using 16394 buffer header ...."

 

However, if I boot from the installation DVD with the option rd=disk1s1 then it would boot into the welcome screen and everything runs normally. I can mount dmg, can safari ect..

 

There must be something in the installed DVD that does not get install onto my hard drive. Don't know what

 

My configuration:

Motherboard : G33T-M2 v1

CPU : C2D 7200 @2.53 GHz

Chipset G33/ICH9

RAM : OCZ 4GB (2 sticks)

HDD0 : 300 GB SATA

HDD1 : 300 GB SATA (where MAC is installed)

DVD : SATA lite On

Video : nVidia 9600 GT 512 MB

Audio : ALC883 HD

Ethernet: Realtek 8111

ACPI is enable , SATA is set to compatibility in bios

 

I have tried:

#1:

ACPI fix

CPUS=1-fix

ICHx fix

Default kernel

no Audio

no Ethernet

no Video

 

#2:

ACPI fix

CPUS=1-fix

ICHx fix

Default kernel

no Audio

no Ethernet

NVinject 512MB

 

#3:

ACPI fix

CPUS=1-fix

ICHx fix

9.5 Kernel with seatbelt

no Audio

no Ethernet

NVDarwin

 

#4:

ACPI fix

CPUS=1-fix

ICHx fix

9.2 Kernel

no Audio

no Ethernet

NVDarwin

 

Try #2 with all NVidia combination (one at a time), with and without ACPI fix

 

Try #3 with all NVidia combination (one at a time), with and without ACPI fix , with all kernel combination with and without seatbelt (one at a time)

 

All same result.

 

I can run my OSx by booting from install DVD but I would very much want to know why it is not running from the HDD

 

Any idea is appreciate. TIA

 

 

Problem solved.

 

All I need is flash my BIOS with the modded BIOS from Kalby and everything works as expected