Jump to content
8 posts in this topic

Recommended Posts

I am Mac user experienced user but coming to PC i am not right so i tried to install OSX on PC on to my brother's and to my friend's Acer Aspire 5920 , Acer Aspire 5150 Series and Compaq Persario V3000 series all the PC's were laptops

 

In the above PC one laptop was successful it's not so easy.. I just had my unlimited Internet last month so i downloaded (Kalyway 10.5.2) which was for both Intel and AMD and I also had the (Boot132) .. with me

 

1st try

Acer Aspire 5920

Specs: Intel Core 2 Duo , 2GB RAM , 160GB HDD, Intel Graphics Card..

i started with as easier way of installing using (Boot 132) .. the Apple Mac OS X Retail just booted and freeze with Apple logo and spinning wheel stuck... it was hanged and i tried and tried but nothing has happen and after few months like last i downloaded (Kalyway 10.5.2 Intel and AMD) i made bootable of kalyway and try to install on the laptop it startup with verbose mode at (BSD 4 major and 4 minor ) it got stuck again

2nd try on

Compaq Persario V3000

Specs: AMD X2, 512MB RAM, 160 HDD, nVIDA Graphics card...

But with Kalyway 10.5.2 Intel and AMD this time it got stuck saying (waiting for root device).........

 

Trying again on Acer Aspire 5920 using the (Boot132 CD) after as it prompts the OS X DVD i inserted the (Kalyway 10.5.2 DVD) it booted normally and came up with installing options from lang to where to install.... i installed it clean but made some mistakes like adding Graphics Drivers and all and it failed, sometimes with not working of the touchpad and the other time it said connect the keyboard.... but at last finally without changing any settings in (Kalyway DVD) kept the default options and installed.. fine.. and very thing was all right but a few like it didn't detect the (Ethernet and headphone-in port i use it for 5.1 speaker system) .. Not a major problem for but it was my brother's he uses PC only to listen music thru it..

 

I tried same thing in Compaq Persario V3000... it played alot with me it never worked right.. and atlast the installation window came in and tried to install in it stopped when it was (Still 8 min ... to complete .. at down to progress bar) i thought due to changing of some default settings like graphic card.. i tried it agin with the default settings to kalway DVD this time stopped at 12 min to go.. ...

I did this whole process for two day .. i think because of the AMD processor....

 

3rd Try Today...

I downloaded a package for AMD it was (Leo4allv4.1) AMD version i started yesterday night.... on

Acer Aspire 5150 Series

Specs: AMD Athlon X2, 3GB Ram, 140 HDD, ATi Radeon Xpress™ 1200(i know no bcauze i am trying since yesterday)

 

this was my friends laptop i said u will see Mac on PC on u r PC.. but .. i didn't make it..

i had many hopes on (Leo4allv4.1 AMD) because it was an AMD version and my friends PC was the right one to install in.. same here as the above problems Leo4all DVD booted but freezed with Apple logo...

i tried it with Boot132 and after that Leo4all DVD it was installed fine but with graphic card extension, no sound, no capability of playing a video....

i tried again with Boot132 and after kalyway DVD same here installed fine but it came up with volume in the menu bar but no sound, no good resolution due to the graphics card... and went back it same old Windows with eRecovery Backup....

 

So guys can u give me a suggestions to what to download and what to do.... to installed OS X on the remaining to PC's and recovering the ethernet on the other..

 

 

my name is Himavanth B, India..

PowerBook G4, OS X Leo 10.5.6, 512MB RAM crying 80GB and disgusting combodrive.......

even though i love my powerbook and leopard..

 

 

pls friends send me some suggestions, ok

sorry for my bad English.. and for reading a big message.....

 

 

bye...........

@ Himavanth you could try iATKOS v4a - Mac OSx86 Leopard 10.5.4 DVD for AMD.....or Lawless PPC-Leo-10.5.4-Phenom&AMD.......

 

but also sort out your BIOS settings e.g. setting AHCI mode for SATA if that is a BIOS option etc.....

@ Himavanth you could try iATKOS v4a - Mac OSx86 Leopard 10.5.4 DVD for AMD.....or Lawless PPC-Leo-10.5.4-Phenom&AMD.......

 

but also sort out your BIOS settings e.g. setting AHCI mode for SATA if that is a BIOS option etc.....

 

yes i am looking for iATKOS before posting here thanx

i BIOS for the new PC's were very new and very different , i can't figure it out the BIOs settings..

ok thanx i will re check it..

 

bye..

yes i am looking for iATKOS before posting here thanx

i BIOS for the new PC's were very new and very different , i can't figure it out the BIOs settings..

ok thanx i will re check it..

 

bye..

 

Some key BIOS parameters are (but not all BIOS will have the same parameters; e.g AMD different from Intel etc.)

 

AHCI mode for SATA if an option, or SATA enabled if no AHCI option (perhaps also with RAID enabled but raid mode for each HDD disabled)

 

Execute Disable Bit (XD-Bit) [ENABLED]

Limit CPUID MaxVal [DISABLED]

Enhanced C1 (C1E) [DISABLED]

Enhanced Intel Speedstep Technology [DISABLED]

ACPI Suspend Type [s3 (STR)]

ACPI APIC Support [Enabled]

Some key BIOS parameters are (but not all BIOS will have the same parameters; e.g AMD different from Intel etc.)

 

AHCI mode for SATA if an option, or SATA enabled if no AHCI option (perhaps also with RAID enabled but raid mode for each HDD disabled)

 

Execute Disable Bit (XD-Bit) [ENABLED]

Limit CPUID MaxVal [DISABLED]

Enhanced C1 (C1E) [DISABLED]

Enhanced Intel Speedstep Technology [DISABLED]

ACPI Suspend Type [s3 (STR)]

ACPI APIC Support [Enabled]

 

Yes i changed the BIOS setup

i only see the ACPI APCI Support [iDE ACPI] so i changed it

I booted using Leo4All DVD it booted directly using DVD i didn't use the Boot132 CD patch

 

I am installing on Acer Aspire 5515

AMD Athlon 64

3GB RAM

140 GB HDD

ATi Radeon™ Xpress 1200 Graphics

 

At options

i removed Language Translations

Audio Driver (remember i didn't get the sound) i didn't add any thing so i add later

options for audio

AzaliaAudio

AC97Audio ( i think this might work but i didn't add) suggest me

Azaila_AD1988

STAC9271

ALC850

ALC883

ALC882

ALC888

ALC889

 

Video (pls suggest on this)

ATI Drivers

ATi for 3850, 3870or2600 XT PCI-E, 3870X2, 2600 Pro PCI-E, 2600 Pro AGP, 2600 XT AGP, x19x0, X1600 PCI, X1600 AGP, X1400 PCI..... Series ......

nVidia Drivers

GMA Drivers

 

Installing OS X could not complete it crashed

yes this too occur due to not using the Boot 132 CD

 

reply

 

 

Pls suggest me to get the sound.

 

pls guys :D

Yes i changed the BIOS setup

i only see the ACPI APCI Support [iDE ACPI] so i changed it

I booted using Leo4All DVD it booted directly using DVD i didn't use the Boot132 CD patch

 

I am installing on Acer Aspire 5515

AMD Athlon 64

3GB RAM

140 GB HDD

ATi Radeon™ Xpress 1200 Graphics

 

At options

i removed Language Translations

Audio Driver (remember i didn't get the sound) i didn't add any thing so i add later

options for audio

AzaliaAudio

AC97Audio ( i think this might work but i didn't add) suggest me

Azaila_AD1988

STAC9271

ALC850

ALC883

ALC882

ALC888

ALC889

 

Video (pls suggest on this)

ATI Drivers

ATi for 3850, 3870or2600 XT PCI-E, 3870X2, 2600 Pro PCI-E, 2600 Pro AGP, 2600 XT AGP, x19x0, X1600 PCI, X1600 AGP, X1400 PCI..... Series ......

nVidia Drivers

GMA Drivers

 

Installing OS X could not complete it crashed

yes this too occur due to not using the Boot 132 CD

 

reply

Pls suggest me to get the sound.

 

pls guys :P

 

pls send suggestion to get graphics card and sound pls guys

i am working on

Acer Aspire 5515 laptop

AMD Athlon 64

3GB Ram

ATi Radeon Xpress 1200

pls

 

bye..

Some key BIOS parameters are (but not all BIOS will have the same parameters; e.g AMD different from Intel etc.)

 

AHCI mode for SATA if an option, or SATA enabled if no AHCI option (perhaps also with RAID enabled but raid mode for each HDD disabled)

 

Execute Disable Bit (XD-Bit) [ENABLED]

Limit CPUID MaxVal [DISABLED]

Enhanced C1 (C1E) [DISABLED]

Enhanced Intel Speedstep Technology [DISABLED]

ACPI Suspend Type [s3 (STR)]

ACPI APIC Support [Enabled]

 

I changed the BIOS seettings

ACPI APIC [iDE ACPI]

 

I installed kalyway and leo4all but i didn't get sound

 

pls guys send me suggestions how to get me sound and graphics...

yes i am looking for iATKOS before posting here thanx

i BIOS for the new PC's were very new and very different , i can't figure it out the BIOs settings..

ok thanx i will re check it..

 

bye..

 

i used iAtkos 4i it hasn't installed.. while booting verbose mode ..

BSD 14 major and 4 minor (something like that..)

jetlinger... kernral link ,.. it stopped booted

 

i wasted 2 days for it

 

pls send me

suggestions

please guys..

×
×
  • Create New...