damato300 Posted March 28, 2009 Share Posted March 28, 2009 I have my first MacPC up and running with 1 thing I would like to get fixed. First of all here is my setup: Mobo: GIGABYTE GA-G31M-ES2L Processor: Intel Pentium E5200 Wolfdale 2.5GHz overclocked to 3GHz RAM: G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) HDD: Seagate Barracuda 7200.11 ST31000333AS 1TB 7200 RPM SATA DVD: SAMSUNG 22X DVD±R DVD Burner Video: GIGABYTE GV-NX84S512HP GeForce 8400 GS 512MB Case: COOLER MASTER Elite RC-330-KKR1 Black SECC ATX Mid Tower Computer Case 350W Power Supply I used iATKOS v5i to install and everything went well on first boot. I did all Mac updates and everything is running fine with 10.5.6. Except I cannot get Quartz Extreme working with my video card I am using the VGA connector on my video card. Here is what my System Profile says about my display: Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 32 MB Vendor: NVIDIA (0x10de) Device ID: 0x06e4 Revision ID: 0x00a1 Kernel Extension Info: No Kext Loaded Displays: Display: Resolution: 1024 x 768 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported I have tried Punks installer but it does not work. Does anyone have any suggestions? Thanks Dan Link to comment https://www.insanelymac.com/forum/topic/159547-first-install-a-little-help-needed/ Share on other sites More sharing options...
Beerkex'd Posted March 28, 2009 Share Posted March 28, 2009 Open wide...here's your search. http://######.com/osx86search/resul...FORID%3A11#1240 Link to comment https://www.insanelymac.com/forum/topic/159547-first-install-a-little-help-needed/#findComment-1118243 Share on other sites More sharing options...
Recommended Posts