irPhunky Posted February 15, 2009 Share Posted February 15, 2009 I have three network cards in my system; 1x Onboard Marvell 88E8053 PCIE Gigabit LAN 1x PCIE Cheap-o Low Profile Gigabit Lan 1x PCI Realtek Gigabit The PCI based Realtek card has worked out of the bag since i installed Leopard 10.5.6 (iDeneb 1.4) but i've not been able to get any of the others working at all. I don't have Windows on this system any more so unsure how i could get the device id - even then i dont know what to do next to set it up. None of the cards show up under PCI cards in the system profiler also. Link to comment https://www.insanelymac.com/forum/topic/153153-3-network-card-only-one-works/ Share on other sites More sharing options...
irPhunky Posted February 15, 2009 Author Share Posted February 15, 2009 The cards seem to be found when i look up the PCI info in osx86Tools 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 20)03:00.0 IDE interface [0101]: JMicron Technologies, Inc. JMB368 IDE controller [197b:2368] 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 22) 05:02.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10) Looks like the onboard and the PCI-E card are the same type also Link to comment https://www.insanelymac.com/forum/topic/153153-3-network-card-only-one-works/#findComment-1081223 Share on other sites More sharing options...
Recommended Posts