Disk mount failure.

[lagus]

Hello everyone!

 

I have looked for a anser to my question but have not found someone with the same problem.

I recently installed OSX on one of my disk and it works flawless!

On that disk I have three partitions.

Partition 1: OS: Windows FS: NTFS

Partition 2: OS: OSX FS: HPFS+ (jornaled)

PArtition 3: STORAGE FS: NTFS

I have installed MacFUSE and NTFS-3g and they work R/W

 

The two other how ever are not working as supposed.

They are also both NTFS and only one partition on each disk.

Both worked flawless in windows up untill I installed OSX.

--> I did unplugg both drives while I was installing (several reinstalls) to not make ANY mistakes on them whats so ever.

Now when I boot Windows only one of the two drives show up (the second drive)

and in OSX a fail message say "the disk you inserted is not readable by this computer"

with the options "initialize" "ignore" and "eject" Initialize takes me to Disk Uitility.

And Im not able to do anything there.

I relay need these disks, especially the first (Its my photo disk!) - I know I have not formated them

 

Here are a output from System profiler:

Serial-ATA Bus:

 ST3250620AS:

Capacity:	232.89 GB
Model:	ST3250620AS
Revision:	3.AAE
Serial Number:	3QE08FJ6
Removable Media:	No
Detachable Drive:	No
BSD Name:	disk1
Protocol:	ata
Unit Number:	0
Socket Type:	Serial-ATA
Mac OS 9 Drivers:	No
Partition Map Type:	MBR (Master Boot Record)
S.M.A.R.T. status:	Verified

 

Serial-ATA Bus:

 ST3250620AS:

Capacity:	232.89 GB
Model:	ST3250620AS
Revision:	3.AAE
Serial Number:	3QF0NY4D
Removable Media:	No
Detachable Drive:	No
BSD Name:	disk0
Protocol:	ata
Unit Number:	0
Socket Type:	Serial-ATA
Mac OS 9 Drivers:	No
Partition Map Type:	MBR (Master Boot Record)
S.M.A.R.T. status:	Verified

 

The working disk:

Serial-ATA Bus:

 SAMSUNG SP2004C:

Capacity:	186.31 GB
Model:	SAMSUNG SP2004C
Revision:	VM100-33
Serial Number:	S07GJ1UYC13502
Removable Media:	No
Detachable Drive:	No
BSD Name:	disk2
Protocol:	ata
Unit Number:	0
Socket Type:	Serial-ATA
Mac OS 9 Drivers:	No
Partition Map Type:	MBR (Master Boot Record)
S.M.A.R.T. status:	Verified
Volumes:
 OSX:
Capacity:	38.77 GB
Available:	23.93 GB
Writable:	Yes
File System:	Journaled HFS+
BSD Name:	disk2s2
Mount Point:	/
 STORAGE:
Capacity:	117.27 GB
Available:	10.19 GB
Writable:	Yes
File System:	NTFS-3G
BSD Name:	disk2s3
Mount Point:	/Volumes/STORAGE

 

Anyone have a clue what the problem could be?

Thanks for your help!

/Lagus

 

EDIT:

Sorry of cause my partition is of HPS+ and not HPFS+ (how could I?)

 

Just after posted last time I booted Ubuntu live session and were able to mount and look at one of the disks with no error along with the mounting..

I did not have time to mount and test both drives... I will when I get home again!

Does anyone know about this issue or is it the wrong forum?

[lagus]

really no one?

Could I get directions somewhere?

[lagus]

"Bump"