[How to] Run Kalyway 10.5.2 Flawlessly on GA-945GCM-S2L

[dorkbydesign.]

Hello. This is what you need for this guide

• Kalyway 10.5.2 DVD
  
• GA-945GCM-S2L
  
• Audio Drivers
  

First, set up your board to your liking. If you're using 533MHz RAM, go into the BIOS and increase voltage by 0.5V this should give you a clock speed of 667MHz.

Now, install Kalyway with the following options

• Change the "Sound Drivers" to the third option.
  
• Put the SMBIOS to the iMac or 667 MHz one. They are the same =]
  
• Now, choose your other settings and run through installer.
  
• Remember, unless you are sure you're C2D or C2Q does not boot without the cpus=1 flag, dont put it on.
  

Now, your Ethernet should work out of the box. You just need the audio drivers and it should be working. They can be downloaded:

Here (Download Mirror 1)

Here (Download Mirror 2) [Faster]

Or Here (Download Mirror 3) [RapidShare]

 

After that, you should be done!

[Scradam]

is 5.1 Surround Sound (analog with 2 channels in each plug) working on this mainboard?

 

Thanks heaps. Great guide!