sailor25462 Posted March 18, 2017 Share Posted March 18, 2017 Hey All, My rig works fine so far, however I was using an older Belkin Bluetooth dongle which works, but has no LE and would have hick-ups from time to time (no re-connect of devices after start or after wake it would take very long to re-connect or won't do at all). So I decided to buy the Gmyle dongle, which has a 20702A3 chip set. It works fine, I only had to install the BrcmPatchRAM2.kext and BrcmFirmwareRepo.kext to get the firmware uploaded properly. So far so good, but... when the system hibernates, it will now wake up after a few seconds, with the display staying dark. Log tells me: 2017-03-18 19:11:26 +0100 Sleep Entering Sleep state due to 'Software Sleep pid=113': Using AC 44 secs 2017-03-18 19:11:29 +0100 Assertions PID 596(AddressBookSourceSync) Released PreventUserIdleSystemSleep "Address Book Source Sync" 00:00:32 id:0x0x1000081c5 [System: DeclUser BGTask kDisp] 2017-03-18 19:11:54 +0100 PM Client Acks Delays to Sleep notifications: [com.apple.apsd timed out(28008 ms)] 2017-03-18 19:12:01 +0100 Kernel Client Acks Delays to Sleep notifications: [powerd is slow(28008 ms)] [BroadcomBluetoothHostControllerUSBTransport driver is slow(msg: SetState to 1)(432 ms)] [IOSCSIPeripheralDeviceType00 driver is slow(msg: SetState to 0)(502 ms)] [IOUSBMassStorageInterfaceNub driver is slow(msg: SetState to 0)(494 ms)] 2017-03-18 19:12:01 +0100 Assertions PID 229(mDNSResponder) Created MaintenanceWake "mDNSResponder:maintenance" 00:00:00 id:0x0xd00008225 [System: PrevIdle DeclUser BGTask SRPrevSleep kCPU kDisp] 2017-03-18 19:12:03 +0100 Assertions PID 229(mDNSResponder) Released MaintenanceWake "mDNSResponder:maintenance" 00:00:02 id:0x0xd00008225 [System: PrevIdle DeclUser BGTask kDisp] 2017-03-18 19:12:04 +0100 Assertions PID 58(powerd) Released ExternalMedia "com.apple.powermanagement.externalmediamounted" 00:01:31 id:0x0x800008000 [System: PrevIdle DeclUser BGTask kDisp] 2017-03-18 19:12:07 +0100 Assertions PID 496(cloudd) Released PreventUserIdleSystemSleep "Operation running - <CKDFetchRecordsOperation: 0x7f8d1fa26fe0; operationID=5869740CF3552060, stateFlags=executing, qos=UserInitiated, flags=allows-cellular, runningFor=0s>" 00:00:35 id:0x0x100008221 [System: PrevIdle DeclUser BGTask kDisp] 2017-03-18 19:12:07 +0100 Assertions PID 496(cloudd) Released PreventUserIdleSystemSleep "Operation running - <CKDModifyRecordZonesOperation: 0x7f8d1ec24bd0; operationID=A1E7C96C0C7E0414, stateFlags=executing, qos=UserInitiated, flags=allows-cellular, runningFor=0s>" 00:00:36 id:0x0x100008220 [System: DeclUser BGTask kDisp] 2017-03-18 19:12:10 +0100 Assertions PID 58(powerd) Created InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:00 id:0x0xd0000822b [System: PrevIdle DeclUser BGTask SRPrevSleep kCPU kDisp] 2017-03-18 19:12:10 +0100 DarkWake DarkWake from Normal Sleep [CDN] due to GLAN XHC EHC2/: Using AC 2017-03-18 19:12:10 +0100 HibernateStats hibmode=0 standbydelay=0 75 2017-03-18 19:12:10 +0100 Kernel Client Acks Delays to Wake notifications: [XHC1 driver is slow(msg: SetState to 3)(2101 ms)] [AppleBluetoothHIDKeyboard driver is slow(msg: SetState to 1)(2152 ms)] [BNBMouseDevice driver is slow(msg: SetState to 1)(2152 ms)] [IOUSBMassStorageInterfaceNub driver is slow(msg: SetState to 1)(1090 ms)] [IOUSBMassStorageDriverNub driver is slow(msg: SetState to 1)(3239 ms)] [PRT3 driver is slow(msg: SetState to 2)(4903 ms)] [PRT1 driver is slow(msg: SetState to 2)(5982 ms)] [PRT4 driver is slow(msg: SetState to 2)(6094 ms)] [IOSCSIPeripheralDeviceType05 driver is slow(msg: SetState to 2)(8926 ms)] [AppleHDADriver driver is slow(msg: SetState to 1)(430 ms)] 2017-03-18 19:12:10 +0100 Assertions PID 58(powerd) Created InternalPreventSleep "com.apple.powermanagement.acwakelinger" 00:00:00 id:0x0xd0000822c [System: PrevIdle DeclUser BGTask SRPrevSleep kCPU kDisp] 2017-03-18 19:12:10 +0100 Assertions Kernel Idle sleep preventers: IODisplayWrangler 2017-03-18 19:12:10 +0100 Notification Display is turned on 2017-03-18 19:12:26 +0100 Assertions PID 92(apsd) Released ApplePushServiceTask "com.apple.apsd-login" 00:01:38 id:0x0xb000080d6 [System: DeclUser BGTask SRPrevSleep IPushSrvc kCPU kDisp] 2017-03-18 19:12:55 +0100 Assertions PID 58(powerd) Released InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:45 id:0x0xd0000822b [System: DeclUser BGTask SRPrevSleep kCPU kDisp] 2017-03-18 19:12:55 +0100 Assertions PID 58(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.acwakelinger" 00:00:45 id:0x0xd0000822c [System: DeclUser BGTask SRPrevSleep kCPU kDisp] Sleep/Wakes since boot at 2017-03-18 19:10:32 +0100 :1 Dark Wake Count in this sleep cycle:1 So I assume it's the EHC2 USB2 port with the Gmyle dongle plugged in, which causes the wake up now. Tried fiddling with clover, turning on/off FixUSB, USB injection, Add clock ID, FixOwnership, etc. but nothing helped. With the older Belkin dingle sleep worked fine with all clover settings. I wonder if there's any way to get this sorted out? Link to comment Share on other sites More sharing options...
sailor25462 Posted March 24, 2017 Author Share Posted March 24, 2017 bump! Please .... Link to comment Share on other sites More sharing options...
Recommended Posts