intel d915grv motherborad

[xman_p2]

intel d915grv motherborad

intel pentium 4

1 gig of ram

 

useing the leohazard install

for options I used

mac osx 10.6.2

chameleon 10.5

legacy kernel 10.2.0

rosetta

quicktime7

 

at boot it freezes after the kernel is loaded kernel panic

trap at 0x214d269a type 13 etc etc.

 

with boot option -x it boots in safe mode

the system profiler says I have a gma 900 built in video card but no kext loaded to run it yet it's runnning it fine in safe mode.

missing sound and network can't read a usb stick etc.

 

what should I do to stop the kernel panic and boot normally?

[xman_p2]

tracked down the kernel crashing kext stupid appletymceddriver removed the driver with the method in this post.

 

credits

http://www.hackint0sh.org/showthread.ph ... post603662

 

/sbin/mount -uw /

rm -rf /System/Library/Extensions/AppleTyMCEDriver.kext

rm -rf /System/Library/Extensions/*AppleTyMCEDriver.kext

rm -rf /System/Library/Caches/com.apple.kext.caches

reboot


 

Then reboot with -v -f (and -x if needed)

 

you have to let the first boot happen and fail before you can remove the kext.

 

 

Still missing sound and network and also if I walk away and the thing tries to enter sleep mode it crashes won't come out of sleep mode jst locks up.

 

I havn't patched the dsdt I'm confused about some things it seems the newer kexts that are installed by default take care of a lot but how much I'm unsure like fakesmc the 2.5 version, some posts say I don't need to patch the dsdt. and what's with the bootloader pci thing, it looks like a 3 pronged approach to make the boards comptible

 

modded kextx

bootloader pci

dsdt patches which seems like it's part of the bootloader pci

 

So I guess I'm asking should I patch the dsdt with this distribution of leohzard to fix the power saveing sleep mode lockups.

 

 

This motherboard is also stange the intel website doesn't list it yet other sites say d915grv = d915gag

 

anyway any help appreciated.

[xman_p2]

got the network card working it's a marvell yukon 88e8050 PCI-E ASF

 

vender id 11ab

dev id 4361

 

added card to yukon2.kext useing references to

 

http://www.insanelymac.com/forum/index.php?showtopic=28680

http://www.insanelymac.com/forum/index.php?showtopic=34074

http://www.insanelymac.com/forum/index.php?showtopic=69356

http://www.onlinehowto.net/Tutorials/Windo...r-hardware/1470

 

Since all the site requests is quality kext's I've attached the modified kext it should work all devices it did before plus the new device I added.

 

this motherboard is found in MPC Clientpro 365

 

 

 

 

still struggling with sound

 

realtek hd audio will post id and vender if it will help I can't pull the chip info

 

windows say's it's a realtek high definition audio location 65535 in device manager

 

 

 

also even after patching my dsdt the machine still locks up the harddrive spins down into power saving mode and the machine locks up.

IONetworkingFamily.kext.zip

[Narvester]

Hi xman_p2,

 

I'm not sure if you're still out there but I'm new to Mac/Hackintosh and I'm trying to build one of my own. I have the same motherboard as you i.e. Intel D915GRV which I suspect is causing me problems booting up after installed iATKOS S3 v2 Snow Leopard 10.6.3.

 

I suspect that I need to update my DSDT.aml file which is proving extremely difficult so are you able to send me a copy of yours please? Also, some instructions on how to insert the file into the correct folder on my hackintosh would be much appreciated.

 

No amount of switches i.e. -v -x etc. at the boot prompt will get me past a blank screen.

 

Here is the troublesome part of the bootlog of my hackintosh:

No SMBIOS replacement found.
Patched DMI Table
Found SMBIOS System Information Table 1
Using SMBIOS UUID='cf91e9b0-8eda-111d9-bc36-001111989417' as system-id
[WARNING] /Extra/DSDT.aml not found
Using PCI-Root-UID value 0
Intel VGA Controller [8086:2582) :: PciRoot(0x0)/Pci(0x2,0x0) (currently NOT SUPPORTED)
LAN Controller [llab:4361] :: PciRoot(0x0)/Pci(0x1c,0x1)/Pci(0x0,0x0)
Setting up lan keys
UHCI controller [8086:2658] at 00:1d.0 base 640(c801)
UHCI controller [8086:2659] at 00:1d.1 base 660(cc01)
UHCI controller [8086:265a] at 00:1d.2 base 680(d001)
UHCI controller [8086:265b] at 00:1d.3 base 6a0(d401)
EHCI controller [8086:265c] at 00:1d.7 DMA @ff43bc00
Using system-type=0x01
No DSDT replacement found. Leaving ACPI data as is
Starting Darwin x86

 

Thanks in advance,

Narvester