andynotts Posted September 19, 2010 Share Posted September 19, 2010 Thought I'd share my new build with everyone. Thanks to Tonymacx86 and Macman for [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Thanks to Conti for MyHack Thanks to everyone who wrote guides and forum posts I've trawled for this. What's in the box... Gigabyte H55M-S2H motherboard Intel i3-530 processor Zotac GT240 1GB Zone Edition graphics card Samsung F3 1TB hard drive Samsung Blu-Ray drive Seasonic 330W PSU Big Shuriken CPU cooler....real bugger to fit SilverStone Grandia GD04 Case I used the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] Supported bootloader Retail OS X 10.6.0 install disc Updated to 10.6.4 then ran a combination of MyHack and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] with the DSDT from this site. Actually that's pretty much all there was to installing. It took a lot of trial and error. I could not get [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to work properly, I think it's a case I need to RTFM. I followed the standard method to begin with, installed OS X then immediately ran the 10.6.4 combo update. After the update rebooted still using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], not essential but I knew the update hadn't killed anything and everything still worked. At this point I had tried a few different methods, Easy and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], neither would boot after running, it was stuck in a reboot loop, I think I had the wrong kernel because it couldn't get to the grey Apple screen even or possibly an issue of me using a 1TB HDD. If I just ran MyHack it would load but with no USB, and then I could't reboot using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] because it would kernel panic. So I used MyHack to install the Chameleon bootloader and sort out the kernel, it seems to do that automatically and very well. Then without rebooting I ran [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] for the DSDT and kexts. End result a fully working system. Im running this as a Plex media centre, the graphics card is 1 of the few fanless HDMI cards I could find and PSU and CPU fans are very quiet, you can hear it but you have to be listening. I don't think it looks out of place under a TV. Only problem I've had was when I added an extra HDD it refused to boot, took the drive out and ok. I need to look at that some more not an issue today but in a month I'll be dying for more space. I don't think it's a Hackintosh issue actually not sure the BIOS is trying to boot off the correct drive. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.