sala Posted January 10, 2010 Share Posted January 10, 2010 All, After many unsuccessful attempts with iPC 10.5.6 and iDENEB 10.5.6, I have successfully installed iATKOS v7 (10.5.7) on Asus P5PE-VM. Thought I would share the news in case others are having similar problems. My System: -Asus P5PE (Intel 865G, Intel ICH5) -nVidia 6600 GT VGA Graphics -On-Board Marvell 88E8001 -On-Board ADI 1888 6-Channel AC'97 Audio -Two IDE hard drives -Two SATA hard drives -Two IDE DVD Writers I installed to one of the IDE hard drives. As best I can remember the options I selected at installation were: -iATKOS v7 Main System -Chameleon v2 -/Extra directory -DSDT -AppleDecrypt -Disabler -EFI string for nVidia::DVI/VGA -Intel SATA/IDE -Voodoo HDA driver (This didn't end up working so I installed AppleAC97 -Marvell Yukon 88E8001 -Post-Install Actions I had three problems after installation: 1. I could only boot successfully with the 'cpus=1' flag. I fixed this by setting the 'Execute Disable Function' to 'Enabled' in the bios. 2. Audio didn't work. I simply installed AppleAC97Audio.kext from my old Kalyway 10.5.2 installation, and presto it worked! 3. I can't change the resolution. Using "Graphics Mode" has not effect. I couldn't find a fix for this and decided it wasn't really a problem since it correctly found the max resolution of my tv (1920x1080x32) and runs flawlessly at that res. I was able to upload to 10.5.8 directly from Software Update without any problems. Graham Link to comment Share on other sites More sharing options...
darquandier Posted July 4, 2010 Share Posted July 4, 2010 Hi, I've the same mother board and I'm going to try to install osx on my computer. the nvidia graphic card is needed or I can use the one integrated in the MB ??? thanks for your help Link to comment Share on other sites More sharing options...
Recommended Posts