macosxpanther Posted May 23, 2006 Share Posted May 23, 2006 ecco i file plist che devono essere modificati.... cambiateli in questo modo e dopo scrivete quello che posterò più tardi nel terminale.... Ok my plists: CONSIDERATIONS Mine is a ASUS XT1600XT Silent Type: VGA-Compatible Controller Bus: PCI Slot: PCIE X16 SLOT VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x71c0 Revision ID: 0x0000 ATINDRV.KEXT info.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">'>http://www.apple.com/DTDs/PropertyList-1.0.dtd">'>http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleDevelopmentRegion</key> <string>English</string> <key>CFBundleExecutable</key> <string>ATINDRV</string> <key>CFBundleGetInfoString</key> <string>ATINDRV 1.4.26.11 (1.0f204)</string> <key>CFBundleIdentifier</key> <string>com.apple.kext.ATINDRV</string> <key>CFBundleInfoDictionaryVersion</key> <string>6.0</string> <key>CFBundleName</key> <string>com.apple.driver.ATINDRV</string> <key>CFBundlePackageType</key> <string>KEXT</string> <key>CFBundleShortVersionString</key> <string>1.4.26</string> <key>CFBundleSignature</key> <string>????</string> <key>CFBundleVersion</key> <string>4.2.6</string> <key>IOKitPersonalities</key> <dict> <key>FirstPersonality</key> <dict> <key>CFBundleIdentifier</key> <string>com.apple.kext.ATINDRV</string> <key>IOClass</key> <string>ATICLASS</string> <key>IOMatchCategory</key> <string>IONDRVFramebuffer</string> <key>IONameMatch</key> <string>display</string> <key>IOProbeScore</key> <integer>50000</integer> <key>IOProviderClass</key> <string>IOPCIDevice</string> </dict> </dict> <key>OSBundleLibraries</key> <dict> <key>com.apple.iokit.IOGraphicsFamily</key> <string>1.3</string> <key>com.apple.iokit.IONDRVSupport</key> <string>1.3</string> <key>com.apple.kernel.iokit</key> <string>1.0.0b1</string> </dict> <key>OSBundleRequired</key> <string>Safe Boot</string> </dict> </plist> ATI RADEON X1000.KEXT info.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleDevelopmentRegion</key> <string>English</string> <key>CFBundleExecutable</key> <string>ATIRadeonX1000</string> <key>CFBundleGetInfoString</key> <string>ATIRadeonX1000 1.4.26.11 (3493)</string> <key>CFBundleIdentifier</key> <string>com.apple.ATIRadeonX1000</string> <key>CFBundleInfoDictionaryVersion</key> <string>6.0</string> <key>CFBundleName</key> <string>ATI RadeonX1000 Kernel Extension</string> <key>CFBundlePackageType</key> <string>KEXT</string> <key>CFBundleShortVersionString</key> <string>1.4.26</string> <key>CFBundleSignature</key> <string>????</string> <key>CFBundleVersion</key> <string>4.2.6</string> <key>IOKitPersonalities</key> <dict> <key>ATIRadeonX1000</key> <dict> <key>ATIEnableWideBlitSupport</key> <true/> <key>ATIUseTearingWideBlit</key> <false/> <key>CFBundleIdentifier</key> <string>com.apple.ATIRadeonX1000</string> <key>IOCFPlugInTypes</key> <dict> <key>ACCF0000-0000-0000-0000-000a2789904e</key> <string>ATIRadeonX1000GA.plugin</string> </dict> <key>IOClass</key> <string>ATIRadeonX1000</string> <key>IODVDBundleName</key> <string>ATIRadeonX1000VADriver</string> <key>IOMatchCategory</key> <string>IOAccelerator</string> <key>IOPCIMatch</key> <string>0x71C01002</string> <key>IOProviderClass</key> <string>IOPCIDevice</string> <key>IOSourceVersion</key> <string>1.4.26.11</string> <key>sensor-properties</key> <array> <dict> <key>device_type</key> <data> Z3B1LXNlbnNvcg== </data> <key>location</key> <string>GPU</string> <key>name</key> <string>gpu-sensor</string> <key>polling-period</key> <data> AAAAAQAAAAA= </data> <key>reg</key> <data> AAAAAg== </data> <key>sample-period</key> <data> AAAAAACYmAA= </data> <key>sensor-id</key> <data> AAAABg== </data> <key>version</key> <data> AAAAAg== </data> <key>zone</key> <data> AAAAAg== </data> </dict> </array> </dict> </dict> <key>OSBundleLibraries</key> <dict> <key>com.apple.iokit.IOGraphicsFamily</key> <string>1.0.0b1</string> <key>com.apple.iokit.IONDRVSupport</key> <string>1.0.0b1</string> <key>com.apple.iokit.IOPCIFamily</key> <string>1.0.0b1</string> <key>com.apple.kernel.iokit</key> <string>1.0.0b1</string> </dict> </dict> </plist> ATI RADEON X1000 PLUGIN KEXT info.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleDevelopmentRegion</key> <string>English</string> <key>CFBundleExecutable</key> <string>ATIRadeonX1000GA</string> <key>CFBundleGetInfoString</key> <string>ATIRadeonX1000GA 1.4.26.11 (3493)</string> <key>CFBundleIdentifier</key> <string>com.apple.ATIRadeonX1000GA</string> <key>CFBundleName</key> <string>ATI RadeonX1000 Graphics Driver</string> <key>CFBundleShortVersionString</key> <string>1.4.26</string> <key>CFBundleVersion</key> <string>4.2.6</string> <key>CFPlugInDynamicRegistration</key> <string>NO</string> <key>CFPlugInFactories</key> <dict> <key>100271c0-0000-0000-0000-000a27898d3e</key> <string>ATIRadeonX1000GAFactory</string> </dict> <key>CFPlugInTypes</key> <dict> <key>ACCF0000-0000-0000-0000-000a2789904e</key> <array> <string>100271c0-0000-0000-0000-000a27898d3e</string> </array> </dict> <key>NSExecutable</key> <string>ATIRadeonX1000GA</string> <key>Personality</key> <dict> <key>IOProviderClass</key> <string>IONDRVFramebuffer</string> </dict> </dict> </plist> Hey PPL, is ther a way to tell OSX i have a SONY TFT screen? cheers Aberracus più tardi vi dico cosa scrivere dal terminale.... nn fate le modifiche se prima nn vi posto cosa scrivere, rischiereste di rendere inavviabile il pc.... In all the plists, I just dele=ted all other references to other device ID's After this, I deleted the mext and kext.cache, and ran: sudo kext.cache -k /System/Library/Extentions AFter that, fix permissions, rebooted and smiled as my system worked as it anzi che cosa significa questo in italiano? se scrivo questo nel terminale nn succeede un tubo... qualcuno sa come fare x applicare le modifiche e quindi cosa scrivere nel terminale.... grazie a tu tti x gli aiuti.... anke se mi sembra strano k voi hacker vi abbassate a questi livelli.... siete troppo impegnati a fare i pirla con altre cose :-) Link to comment Share on other sites More sharing options...
protools Posted May 23, 2006 Share Posted May 23, 2006 ecco i file plist che devono essere modificati.... cambiateli in questo modo e dopo scrivete quello che posterò più tardi nel terminale.... Ok my plists: CONSIDERATIONS Mine is a ASUS XT1600XT Silent Type: VGA-Compatible Controller Bus: PCI Slot: PCIE X16 SLOT VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x71c0 Revision ID: 0x0000 ATINDRV.KEXT info.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">'>http://www.apple.com/DTDs/PropertyList-1.0.dtd">'>http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleDevelopmentRegion</key> <string>English</string> <key>CFBundleExecutable</key> <string>ATINDRV</string> <key>CFBundleGetInfoString</key> <string>ATINDRV 1.4.26.11 (1.0f204)</string> <key>CFBundleIdentifier</key> <string>com.apple.kext.ATINDRV</string> <key>CFBundleInfoDictionaryVersion</key> <string>6.0</string> <key>CFBundleName</key> <string>com.apple.driver.ATINDRV</string> <key>CFBundlePackageType</key> <string>KEXT</string> <key>CFBundleShortVersionString</key> <string>1.4.26</string> <key>CFBundleSignature</key> <string>????</string> <key>CFBundleVersion</key> <string>4.2.6</string> <key>IOKitPersonalities</key> <dict> <key>FirstPersonality</key> <dict> <key>CFBundleIdentifier</key> <string>com.apple.kext.ATINDRV</string> <key>IOClass</key> <string>ATICLASS</string> <key>IOMatchCategory</key> <string>IONDRVFramebuffer</string> <key>IONameMatch</key> <string>display</string> <key>IOProbeScore</key> <integer>50000</integer> <key>IOProviderClass</key> <string>IOPCIDevice</string> </dict> </dict> <key>OSBundleLibraries</key> <dict> <key>com.apple.iokit.IOGraphicsFamily</key> <string>1.3</string> <key>com.apple.iokit.IONDRVSupport</key> <string>1.3</string> <key>com.apple.kernel.iokit</key> <string>1.0.0b1</string> </dict> <key>OSBundleRequired</key> <string>Safe Boot</string> </dict> </plist> ATI RADEON X1000.KEXT info.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleDevelopmentRegion</key> <string>English</string> <key>CFBundleExecutable</key> <string>ATIRadeonX1000</string> <key>CFBundleGetInfoString</key> <string>ATIRadeonX1000 1.4.26.11 (3493)</string> <key>CFBundleIdentifier</key> <string>com.apple.ATIRadeonX1000</string> <key>CFBundleInfoDictionaryVersion</key> <string>6.0</string> <key>CFBundleName</key> <string>ATI RadeonX1000 Kernel Extension</string> <key>CFBundlePackageType</key> <string>KEXT</string> <key>CFBundleShortVersionString</key> <string>1.4.26</string> <key>CFBundleSignature</key> <string>????</string> <key>CFBundleVersion</key> <string>4.2.6</string> <key>IOKitPersonalities</key> <dict> <key>ATIRadeonX1000</key> <dict> <key>ATIEnableWideBlitSupport</key> <true/> <key>ATIUseTearingWideBlit</key> <false/> <key>CFBundleIdentifier</key> <string>com.apple.ATIRadeonX1000</string> <key>IOCFPlugInTypes</key> <dict> <key>ACCF0000-0000-0000-0000-000a2789904e</key> <string>ATIRadeonX1000GA.plugin</string> </dict> <key>IOClass</key> <string>ATIRadeonX1000</string> <key>IODVDBundleName</key> <string>ATIRadeonX1000VADriver</string> <key>IOMatchCategory</key> <string>IOAccelerator</string> <key>IOPCIMatch</key> <string>0x71C01002</string> <key>IOProviderClass</key> <string>IOPCIDevice</string> <key>IOSourceVersion</key> <string>1.4.26.11</string> <key>sensor-properties</key> <array> <dict> <key>device_type</key> <data> Z3B1LXNlbnNvcg== </data> <key>location</key> <string>GPU</string> <key>name</key> <string>gpu-sensor</string> <key>polling-period</key> <data> AAAAAQAAAAA= </data> <key>reg</key> <data> AAAAAg== </data> <key>sample-period</key> <data> AAAAAACYmAA= </data> <key>sensor-id</key> <data> AAAABg== </data> <key>version</key> <data> AAAAAg== </data> <key>zone</key> <data> AAAAAg== </data> </dict> </array> </dict> </dict> <key>OSBundleLibraries</key> <dict> <key>com.apple.iokit.IOGraphicsFamily</key> <string>1.0.0b1</string> <key>com.apple.iokit.IONDRVSupport</key> <string>1.0.0b1</string> <key>com.apple.iokit.IOPCIFamily</key> <string>1.0.0b1</string> <key>com.apple.kernel.iokit</key> <string>1.0.0b1</string> </dict> </dict> </plist> ATI RADEON X1000 PLUGIN KEXT info.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleDevelopmentRegion</key> <string>English</string> <key>CFBundleExecutable</key> <string>ATIRadeonX1000GA</string> <key>CFBundleGetInfoString</key> <string>ATIRadeonX1000GA 1.4.26.11 (3493)</string> <key>CFBundleIdentifier</key> <string>com.apple.ATIRadeonX1000GA</string> <key>CFBundleName</key> <string>ATI RadeonX1000 Graphics Driver</string> <key>CFBundleShortVersionString</key> <string>1.4.26</string> <key>CFBundleVersion</key> <string>4.2.6</string> <key>CFPlugInDynamicRegistration</key> <string>NO</string> <key>CFPlugInFactories</key> <dict> <key>100271c0-0000-0000-0000-000a27898d3e</key> <string>ATIRadeonX1000GAFactory</string> </dict> <key>CFPlugInTypes</key> <dict> <key>ACCF0000-0000-0000-0000-000a2789904e</key> <array> <string>100271c0-0000-0000-0000-000a27898d3e</string> </array> </dict> <key>NSExecutable</key> <string>ATIRadeonX1000GA</string> <key>Personality</key> <dict> <key>IOProviderClass</key> <string>IONDRVFramebuffer</string> </dict> </dict> </plist> Hey PPL, is ther a way to tell OSX i have a SONY TFT screen? cheers Aberracus più tardi vi dico cosa scrivere dal terminale.... nn fate le modifiche se prima nn vi posto cosa scrivere, rischiereste di rendere inavviabile il pc.... In all the plists, I just dele=ted all other references to other device ID's After this, I deleted the mext and kext.cache, and ran: sudo kext.cache -k /System/Library/Extentions AFter that, fix permissions, rebooted and smiled as my system worked as it anzi che cosa significa questo in italiano? se scrivo questo nel terminale nn succeede un tubo... qualcuno sa come fare x applicare le modifiche e quindi cosa scrivere nel terminale.... grazie a tu tti x gli aiuti.... anke se mi sembra strano k voi hacker vi abbassate a questi livelli.... siete troppo impegnati a fare i pirla con altre cose :-) Comunque...senza .....i pirla è anche meglio... sudo rm /System/Library/Extensions.mkext sudo rm /System/Library/Extensions.kextcache sudo kextcache -k /System/Library/Extensions saluti Link to comment Share on other sites More sharing options...
macosxpanther Posted May 23, 2006 Author Share Posted May 23, 2006 inoltre dicono alcuni, che è meglio eliminare tutti gli altri kext riguardanti le schede video, quindi tutti gli altri file tranne quelli ati 1000 e atindrv dovete eliminare tutti gli altri ati e nvidia.... e levare se avete messo la risuluzione dal boot.plist... lasciandolo originale... ciao e spero di essere stato d'aiuto a molti... ps postate la vostra esperienza dicendo se ha funzionato o no Link to comment Share on other sites More sharing options...
macosxpanther Posted May 25, 2006 Author Share Posted May 25, 2006 a qualcuno ha funzionato? Link to comment Share on other sites More sharing options...
Recommended Posts