skenter Posted May 10, 2009 Share Posted May 10, 2009 hello, i have a problem to install Mac OSx Leopard... 10.5.2 / 10.5.4 / 10.5.5 / 10.5.6 / Leo4allv3 / iAktos / kalway... WHATEVER !it is everytime the same problem ! AppleNForceATA: found 1 units. AppleNForceATA: NVIDIA nForce MCP 51 by MeDevil (CMD 0x1f0, CTR 0x30b4, IRQ 23, BM 0x3090) 4.150.25.10AplleNForceATA: warning: phy connection failed. status=0x00000000 AppleNForceATA: found 0 units. Got boot device = IOSERVICE:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE@D/AppleNForce ATARoot/PRO0@0/AppleNForceATA/ATADeviceNub@0/IOATAPIProtocolTransport/IOSCSIPeripheralDeviceNub/IOSCSIPeripheralDeviceType05/IODVDService/IODVDBLockStor BSD root: disk1s2, major 14, minor 5 jnl: unknown-dev: open. Ohys_blksz 2048 does not match journal header size 512 jettisoning kernel linker. &&&&&&&&&&&&&&&&&&&&&&&&&&&&&..... .....&&&&&& after that the bootlaoder starts and i see the startup screen a blue sky...and in the upper left corner a colored ball that spinning..... and spinning .... and spinning.... xDDDDD ( leo4all version) Hewelett-Packard HP G6050EG Rev1 [bios] Hewelett-Packard (phoenix) version F.1F 12/05/2007 ( newest !!! ) -.- [cpu] AMD Athlon 64 X2 TK53 1700MHz cocket s1 [chip] NVIDIA nForce 430/410 Serial ATA Controller ( MCP51 chipset) [hdd] seagate ST9120822AS revision 3.BHE i have try so many ways... patched with nForce ppf......... can anybody help me ? THANKS ! Link to comment Share on other sites More sharing options...
skenter Posted May 10, 2009 Author Share Posted May 10, 2009 i have read that the "Medevils AppleNforceATA.kext 1.0.3." works with MCP51 .... but the problem is ... i am a beginner with mac systems... anybody have a tutorial or a instruction how i can add the Medevils AppleNforceATA.kext 1.0.3 to in OSx image.... PLEASE Link to comment Share on other sites More sharing options...
Recommended Posts