smjork Posted February 22, 2009 Share Posted February 22, 2009 Ok, so having no answer on my previous post on my iDeneb install, I thought I give a shot to the latest iPC release. And it turned out it worked out very good, close to my previous experiences with JaS, XxX and Leo4ALL. All went fine and smooth and I am so much close to being a happy user again. But I got the very old problem with the CI/QE. It was much too beautiful to be perfect ... And as this forum changed a lot since my last visit, I find myself lost trying to find help on how to enable QE on my card. Once there were some sticky posts on trivial problems like mine but it seems that those posts vanished. So, I need help to enable QE on iPC 10.5.6 PPF5 FINAL, using the 9.4.0 Universal kernel. During installation I chose to install the "ATI Radeon HD 2900" provided drivers (I will try a new installation using the provided "Natit" too right after I end this post, just to make sure, but I have the feeling it won't help me too much) The "About ...." now shows like this: Chipset Model: ATI Radeon HD 2900 Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: ATI (0x1002) Device ID: 0x9400 Revision ID: 0x0000 ROM Revision: 113-B1480A-236 EFI Driver Version: 01.00.236 Displays: SyncMaster: Resolution: 1680 x 1050 @ 60 Hz Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Rotation: Supported Display Connector: Status: No display connected ... and I really hope this time someone will bother to answer. Link to comment Share on other sites More sharing options...
bluerecap Posted April 4, 2009 Share Posted April 4, 2009 I, i have a Radeon HD2900XT 1gb and install ideneb 1.4; 10.5.6, all ok, just video, bu in this post http://www.insanelymac.com/forum/index.php?showtopic=94090 Supported Radeon HD cards: Radeon HD 2400 Radeon HD 2600 Pro, Radeon HD 2600 XT Radeon HD 2900 Pro, Radeon HD 2900 XT Radeon HD 3850 Radeon HD 3870 Radeon HD 3870x2 explain how to install and work full, just install kext on your system and ready..... Works for me i have full QE CI, hope to help u..... Link to comment Share on other sites More sharing options...
bukaz Posted May 11, 2009 Share Posted May 11, 2009 I, i have a Radeon HD2900XT 1gb and install ideneb 1.4; 10.5.6, all ok, just video, bu in this posthttp://www.insanelymac.com/forum/index.php?showtopic=94090 Supported Radeon HD cards: Radeon HD 2400 Radeon HD 2600 Pro, Radeon HD 2600 XT Radeon HD 2900 Pro, Radeon HD 2900 XT Radeon HD 3850 Radeon HD 3870 Radeon HD 3870x2 explain how to install and work full, just install kext on your system and ready..... Works for me i have full QE CI, hope to help u..... HOW?? dont work on my 2900xt 1gb in sys profiler it says 256mb, on efi studio max 512mb - no any method work just black squares Link to comment Share on other sites More sharing options...
bukaz Posted May 11, 2009 Share Posted May 11, 2009 black squares is appear? Link to comment Share on other sites More sharing options...
Nowrus Posted June 12, 2009 Share Posted June 12, 2009 RHD2900 zip http://www.mediafire.com/?sharekey=4ff1512...04e75f6e8ebb871 Link to comment Share on other sites More sharing options...
phoenix_iii Posted August 6, 2009 Share Posted August 6, 2009 Trying this. Been using the 18mb package and got black and blue squares/garbled Link to comment Share on other sites More sharing options...
Recommended Posts