iDeneb v1.4 on FSC amilo Ui 3520 netbook

[gebseng]

Hi there,

 

i "successfully" installed iDeneb v1.4 (Leopard 1.5.6) on the FSC amilo Ui 3520 netbook (which seems to be, by the way, a pretty good machine: only € 300,-, very bright non-glare screen, RAM "inofficially" upgradable to 2GB, expresscard 34)

 

the install worked after choosing the intel gma950 kext.

 

however, a lot of hardware (video (only 800x600 resolution at the moment), trackpad, keyboard, sleep/hibernate, wifi, sound, ethernet) does not work at the moment. can you advise me onto which kexts to install?

usb, exprescard34, firewire works fine.

 

and a general question: is there a way to use two-finger gestures on the synaptics trackpad?

 

here is the system information (from windows xp):

 

------------------

System Information

------------------

Time of this report: 4/30/2009, 17:16:28

Machine name:

Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp.080413-2111)

Language: German (Regional Setting: German)

System Manufacturer: FUJITSU SIEMENS

System Model: AMILO Ui 3520

BIOS: Version 1.0

Processor: Intel® Atom CPU N270 @ 1.60GHz (2 CPUs)

Memory: 1014MB RAM

Page File: 338MB used, 2101MB available

Windows Dir: C:\WINDOWS

DirectX Version: DirectX 9.0c (4.09.0000.0904)

DX Setup Parameters: Not found

DxDiag Version: 5.03.2600.5512 32bit Unicode

 

------------

DxDiag Notes

------------

DirectX Files Tab: No problems found.

Display Tab 1: No problems found.

Sound Tab 1: No problems found.

Music Tab: No problems found.

Input Tab: No problems found.

Network Tab: No problems found.

 

--------------------

DirectX Debug Levels

--------------------

Direct3D: 0/4 (n/a)

DirectDraw: 0/4 (retail)

DirectInput: 0/5 (n/a)

DirectMusic: 0/5 (n/a)

DirectPlay: 0/9 (retail)

DirectSound: 0/5 (retail)

DirectShow: 0/6 (retail)

 

---------------

Display Devices

---------------

Card name: Mobile Intel® 945 Express Chipset Family

Manufacturer: Intel Corporation

Chip type: Intel® GMA 950

DAC type: Internal

Device Key: Enum\PCI\VEN_8086&DEV_27AE&SUBSYS_115D1734&REV_03

Display Memory: 128.0 MB

Current Mode: 1024 x 600 (32 bit) (60Hz)

Monitor: Plug und Play-Monitor

Monitor Max Res: 1600,1200

Driver Name: igxprd32.dll

Driver Version: 6.14.0010.4926 (English)

DDI Version: 9 (or higher)

Driver Attributes: Final Retail

Driver Date/Size: 2/15/2008 14:12:06, 57344 bytes

WHQL Logo'd: n/a

WHQL Date Stamp: n/a

VDD: Nicht zutreffend

Mini VDD: igxpmp32.sys

Mini VDD Date: 2/15/2008 14:12:06, 5854752 bytes

Device Identifier: {D7B78E66-64EE-11CF-BA67-5731A2C2CB35}

Vendor ID: 0x8086

Device ID: 0x27AE

SubSys ID: 0x115D1734

Revision ID: 0x0003

Revision ID: 0x0003

Video Accel:

Deinterlace Caps: n/a

Registry: OK

DDraw Status: Enabled

D3D Status: Enabled

AGP Status: Not Available

DDraw Test Result: Not run

D3D7 Test Result: Not run

D3D8 Test Result: Not run

D3D9 Test Result: Not run

 

-------------

Sound Devices

-------------

Description: Realtek HD Audio output

Default Sound Playback: Yes

Default Voice Playback: Yes

Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_1734115D&REV_1000

Manufacturer ID: 1

Product ID: 100

Type: WDM

Driver Name: RtkHDAud.sys

Driver Version: 5.10.0000.5667 (English)

Driver Attributes: Final Retail

WHQL Logo'd: n/a

Date and Size: 7/16/2008 19:52:00, 4747776 bytes

Other Files:

Driver Provider: Realtek Semiconductor Corp.

HW Accel Level: Full

Cap Flags: 0x0

Min/Max Sample Rate: 0, 0

Static/Strm HW Mix Bufs: 0, 0

Static/Strm HW 3D Bufs: 0, 0

HW Memory: 0

Voice Management: No

EAX 2.0 Listen/Src: Yes, Yes

I3DL2 Listen/Src: Yes, Yes

Sensaura ZoomFX: No

Registry: OK

Sound Test Result: Not run

 

---------------------

Sound Capture Devices

---------------------

Description: Realtek HD Audio Input

Default Sound Capture: Yes

Default Voice Capture: Yes

Driver Name: RtkHDAud.sys

Driver Version: 5.10.0000.5667 (English)

Driver Attributes: Final Retail

Date and Size: 7/16/2008 19:52:00, 4747776 bytes

Cap Flags: 0x0

Format Flags: 0x0

 

-----------

DirectMusic

-----------

DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS

DLS Version: 1.00.0016.0002

Acceleration: n/a

Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port

Microsoft MIDI-Mapper [Emuliert], Hardware (Not Kernel Mode), Output, No DLS, Internal

Microsoft GS Wavetable SW Synth [Emuliert], Hardware (Not Kernel Mode), Output, No DLS, Internal

Registry: OK

Test Result: Not run

 

-------------------

DirectInput Devices

-------------------

Device Name: Maus

Attached: 1

Controller ID: n/a

Vendor/Product ID: n/a

FF Driver: n/a

 

Device Name: Tastatur

Attached: 1

Controller ID: n/a

Vendor/Product ID: n/a

FF Driver: n/a

 

Poll w/ Interrupt: No

Registry: OK

 

-----------

USB Devices

-----------

+ USB-Root-Hub

| Vendor/Product ID: 0x8086, 0x27CB

| Matching Device ID: usb\root_hub

| Service: usbhub

| Driver: usbhub.sys, 4/14/2008 01:15:38, 59520 bytes

| Driver: usbd.sys, 4/14/2008 14:00:00, 4736 bytes

 

----------------

Gameport Devices

----------------

 

------------

PS/2 Devices

------------

+ Standardtastatur (101/102 Tasten) oder Microsoft Natural Keyboard (PS/2)

| Matching Device ID: *pnp0303

| Service: i8042prt

| Driver: i8042prt.sys, 4/14/2008 14:00:00, 52992 bytes

| Driver: kbdclass.sys, 4/14/2008 14:00:00, 25216 bytes

|

+ Terminalserver-Tastaturtreiber

| Matching Device ID: root\rdp_kbd

| Upper Filters: kbdclass

| Service: TermDD

| Driver: termdd.sys, 4/14/2008 08:53:28, 40840 bytes

| Driver: kbdclass.sys, 4/14/2008 14:00:00, 25216 bytes

|

+ Synaptics PS/2 Port TouchPad

| Matching Device ID: *syn0d04

| Upper Filters: SynTP

| Service: i8042prt

|

+ Terminalserver-Maustreiber

| Matching Device ID: root\rdp_mou

| Upper Filters: mouclass

| Service: TermDD

| Driver: termdd.sys, 4/14/2008 08:53:28, 40840 bytes

| Driver: mouclass.sys, 4/14/2008 14:00:00, 23552 bytes

 

----------------------------

DirectPlay Service Providers

----------------------------

 

 

 

------------------------

Disk & DVD/CD-ROM Drives

------------------------

Drive: C:

Free Space: 24.7 GB

Total Space: 57.2 GB

File System: NTFS

Model: TOSHIBA MK6028GAL

 

thanks,

 

Gebhard

[f355]

Hello. I have the very same netbook, so I'll try to help, but I'm wondering why you didn't used search.

 

Basically, this machine is pretty similar to other netbooks like MSI Wind. I installed OSX86 in dual-boot from XxX_x86_10.5.6_Install_Disc_Universal_Final.v2.iso (search on torrents), with vanilla kernel.

 

Problems I encountered:

1. Video. Used XxX install option for AA1/MSI Wind GMA950, works perfectly with QE/CI at full 1024x600. I think your issue could be solved by editing plists, just use search to find a method.

2. Sound. Works using this guide: http://ipis-osx.wikidot.com/forum/t-101853...s-ugly-stop-gap , though this driver lacks mic/line-in support and there's no speakers/headphones autoswitching.

3. WLAN. Forget about built-in card and replace with Dell 1397 half-height adapter. I ordered mine from ebay, it's only $16 with free worldwide shipping.

4. Camera. Mine is BisonCam v.0.03, iChat works fine, Photo Booth only with TwistCam and 6-sec delay.

5. Touchpad. Working with scrolling and all using this: http://forums.msiwind.net/viewtopic.php?f=53&t=10109

6. Sleep/Hibernate. Didn't messed with that yet, just disabled for now.

7. Ethernet. Used XxX-included Realtek 1000 driver, works perfectly.

 

Everything other worked OOB with XxX.

 

Hope this helps, and please report if you find solution on camera, microphone and sleep isues.

 

P.S. After doing some more research, I'll probably write a guide to Genius Bar, so please check back periodically.

[gebseng]

f355, thanks a lot for this info! the 3520 works pretty great with the XxX installation, i really owe you one!

Since I'm not too experienced, I could not find out too much about power management/sleep/battery display until now, so any new information in this field is eagerly anticipated,

 

best,

 

geb

[osx psychodude]

Hello. I have the very same netbook, so I'll try to help, but I'm wondering why you didn't used search.

 

Basically, this machine is pretty similar to other netbooks like MSI Wind. I installed OSX86 in dual-boot from XxX_x86_10.5.6_Install_Disc_Universal_Final.v2.iso (search on torrents), with vanilla kernel.

 

Problems I encountered:

1. Video. Used XxX install option for AA1/MSI Wind GMA950, works perfectly with QE/CI at full 1024x600. I think your issue could be solved by editing plists, just use search to find a method.

2. Sound. Works using this guide: http://ipis-osx.wikidot.com/forum/t-101853...s-ugly-stop-gap , though this driver lacks mic/line-in support and there's no speakers/headphones autoswitching.

3. WLAN. Forget about built-in card and replace with Dell 1397 half-height adapter. I ordered mine from ebay, it's only $16 with free worldwide shipping.

4. Camera. Mine is BisonCam v.0.03, iChat works fine, Photo Booth only with TwistCam and 6-sec delay.

5. Touchpad. Working with scrolling and all using this: http://forums.msiwind.net/viewtopic.php?f=53&t=10109

6. Sleep/Hibernate. Didn't messed with that yet, just disabled for now.

7. Ethernet. Used XxX-included Realtek 1000 driver, works perfectly.

 

Everything other worked OOB with XxX.

 

Hope this helps, and please report if you find solution on camera, microphone and sleep isues.

 

P.S. After doing some more research, I'll probably write a guide to Genius Bar, so please check back periodically.

 

wait

did you say you had a working bisoncam??

mine is a bisoncam too

can you help me in making my webcam work?

thanks

i'm on lenovo y300

[f355]

wait

did you say you had a working bisoncam??

mine is a bisoncam too

can you help me in making my webcam work?

thanks

i'm on lenovo y300

 

in short: make sure that cam is turned on (in windows if you have dual-boot, if no, try livecd or something else) and check if your usb works correctly and cam is shown in system profiler.

 

then iChat should work without any additional actions, but Photo Booth will only show black square.

you can workaround that by installing and running app called camtwist (can be found easily in google), but you'll experience 6 sec delay.

 

for additional info read this topic on msiwind forums: http://forums.msiwind.net/osx-software/bis...sion-t6688.html

 

hope this helps.