korkusuz313131 Posted April 13, 2008 Share Posted April 13, 2008 when i install mac os 10.5.2 kalyway with garphic card drivers it allways crash. and i install mac os without graphic card drivers. now resolution is too bad. and i couldnt find drivers for x1600xt for hours... what can i do? thanx... ( sory about my english) Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x71c0 Revision ID: 0x0000 Displays: Display: Resolution: 1024 x 768 Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Link to comment https://www.insanelymac.com/forum/topic/99092-problem-solved-x1600-xt-problem-with-kalyway-1052/ Share on other sites More sharing options...
korkusuz313131 Posted April 13, 2008 Author Share Posted April 13, 2008 its a little hard to solve problem but i did.... now i can see all resolutions. if anyone need kext files i can upload them..... Link to comment https://www.insanelymac.com/forum/topic/99092-problem-solved-x1600-xt-problem-with-kalyway-1052/#findComment-707763 Share on other sites More sharing options...
Nuno Ferreira Posted April 14, 2008 Share Posted April 14, 2008 Hi, I am new to osx86, so I would really be gratefull if you could upload the kexts as well as a tutorial of how to do the necessary configurations. I have a ASUS X1600pro 256MB ID:I0x72c0, your's I0x71c0, so I don't know if your kexts will work, but at least it's a start. Thanks in advance. Nuno Link to comment https://www.insanelymac.com/forum/topic/99092-problem-solved-x1600-xt-problem-with-kalyway-1052/#findComment-707823 Share on other sites More sharing options...
legen_matt Posted April 14, 2008 Share Posted April 14, 2008 @ korkusuz313131 do you use VGA or DVI ? Link to comment https://www.insanelymac.com/forum/topic/99092-problem-solved-x1600-xt-problem-with-kalyway-1052/#findComment-708856 Share on other sites More sharing options...
asapreta Posted April 14, 2008 Share Posted April 14, 2008 its a little hard to solve problem but i did.... now i can see all resolutions. if anyone need kext files i can upload them..... Please I do need. Did you get extended desktop too? If you can post a link to the files would be great. I manage to get them working with a x1650 kext but its not the best. Link to comment https://www.insanelymac.com/forum/topic/99092-problem-solved-x1600-xt-problem-with-kalyway-1052/#findComment-708875 Share on other sites More sharing options...
korkusuz313131 Posted April 15, 2008 Author Share Posted April 15, 2008 firstly i am really new at mac and editing kext files. i cannot take any responsibility about the kext files and your hardware. My garphic card is sapphire x1600 xt pciexpress. and i cannot use dvi. just vga. link includes the kext files which are edited by me and which i use now... and a screenshot for resolutions.... http://imageupload.se/viewer.php?id=080415_2236scrnsht.jpg kext files link. http://r***dshare.com/files/107700251/x1600_kext_files.zip ***=api or you can edit your kext files step by step 1-) goto System/Library/Extensions and delete all Geforce and ati kext files except these five files. ATIRadeonX1000.kext ATIRadeonX1000GA.plugin ATIRadeonX1000GLDriver.bundle ATIRadeonX1000VADriver.bundle ATINDRV.kext 2-) copy these three files to your desktop to wrok on them. ATIRadeonX1000.kext ATIRadeonX1000GA.plugin ATINDRV.kext 3-) right click ATINDRV.kext and click show package contents and open Contents folder. then open folder Plugins there are 8 kext files.their names are ATY_Alopias.kext ATY_Caretta.kext ATY_Hypoprion.kext ATY_Iago.kext ATY_Lamna.kext ATYSphyrna.kext ATY_Triakis.kext ATY_Wormy.kext right click every 8 kext files one by one and click show package contents. open Contents folder and open info.plist files with textedit and change <string>IONDRVDevice</string> lines with <string>IOPCIDevice</string> 4-) Only at ATY_Wormy.kext file you need to change an extra line. change line <string>ATY,WORMY</string> with <string>display</string> then save and exit from ATINDRV.kext file. 5-) right click ATIRadeonX1000.kext and click show package contents. open Contents folder and open info.plist file with text edit. find the line which includes <key>IOPCIMatch</key> under this line there is/are device ids. delete all ids. and write your own id. forexample my device id is Vendor: ATI (0x1002) Device ID: 0x71c0i changed that line like this <key>IOPCIMatch</key> <string>0x71C01002</string> than save and exit this file too. 6-)open ATIRadeonX1000GA.plugin's info.plist file like the others and find two lines like <key>100271C2-0000-0000-0000-000a27898d3e</key> <string>100271C2-0000-0000-0000-000a27898d3e</string> now change 100271C2 part with your devices id... forexample after i changed this lines in my files they are look like <key>100271C0-0000-0000-0000-000a27898d3e</key> <string>100271C0-0000-0000-0000-000a27898d3e</string> now save and exit this file too... 7-)now copy these files to Sysytem/Library/Extensions if mac os ask to replace these files with the old files click yes to confirm. 8-)open terminal and run these commands. sudo rm /System/Library/Extensions.mkext sudo rm /System/Library/Extensions.kextcache sudo kextcache -k /System/Library/Extensions 9-) open disk utility and clik on the disk which you installed the mac os. and click Repair Disk Permissions. reboot your mac, change your resolution and have fun... NOTE: sorry for my English... @ korkusuz313131do you use VGA or DVI ?just VGA... if you have any idea to use DVI please tell me too.... Link to comment https://www.insanelymac.com/forum/topic/99092-problem-solved-x1600-xt-problem-with-kalyway-1052/#findComment-709617 Share on other sites More sharing options...
Proximus Posted April 15, 2008 Share Posted April 15, 2008 I managed to setup hardware acceleration as shown: ATI Mobility Radeon X1600: Chipset Model: ATI Mobility Radeon X1600 Type: Display Bus: PCIe Slot: Slot-1 PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: ATI (0x1002) Device ID: 0x71c5 Revision ID: 0x0000 EFI Driver Version: "01.00.140" Displays: Display: Resolution: 1024 x 768 Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Display Connector: But I still have problem with resolution. Onlz 1024*768... Any advice what to do now? http://rapidshare.com/files/107775784/ATI_...1C5_working.zip (CI/QE works but resolution not so) Link to comment https://www.insanelymac.com/forum/topic/99092-problem-solved-x1600-xt-problem-with-kalyway-1052/#findComment-710041 Share on other sites More sharing options...
dionysossss Posted April 16, 2008 Share Posted April 16, 2008 check this http://forum.insanelymac.com/index.php?sho...mp;#entry678401 Link to comment https://www.insanelymac.com/forum/topic/99092-problem-solved-x1600-xt-problem-with-kalyway-1052/#findComment-710963 Share on other sites More sharing options...
Code Red Posted April 19, 2008 Share Posted April 19, 2008 korkusuz313131: i have the same card, at least a card w same specc, and i downloaded your package and dropped in. All the usual but it still regognize my card as another when i boot. It resoults in only 1024x768. What am i doing wrong or can do?? Link to comment https://www.insanelymac.com/forum/topic/99092-problem-solved-x1600-xt-problem-with-kalyway-1052/#findComment-715207 Share on other sites More sharing options...
Code Red Posted April 21, 2008 Share Posted April 21, 2008 6-)open ATIRadeonX1000GA.plugin's info.plist file like the others and find two lines like <key>100271C2-0000-0000-0000-000a27898d3e</key> <string>100271C2-0000-0000-0000-000a27898d3e</string> now change 100271C2 part with your devices id... forexample after i changed this lines in my files they are look like <key>100271C0-0000-0000-0000-000a27898d3e</key> <string>100271C0-0000-0000-0000-000a27898d3e</string> now save and exit this file too... I have the same card w the same id but wonder how i can see the last digits of that string that suits my card. I mean : 000a27898d3e So far it doesnt work for me. //Andreas Link to comment https://www.insanelymac.com/forum/topic/99092-problem-solved-x1600-xt-problem-with-kalyway-1052/#findComment-718359 Share on other sites More sharing options...
xpur Posted December 11, 2008 Share Posted December 11, 2008 konuyu güzelce anlatmışsın öncelikle teşekkür ederim. aynen dediklerini tek tek yaptım ama malesef 40 defa leopard kuran belki başka biri yoktur. her uygulamada ya gri elmalı loading ekranında takıldı. yada elmadan sonra birden siyah ekrana geçti uzun beklemelerime rahmen orda kala kaldı. ve her seferinde aynı sorunla tekrar tekrar sistemi kurdum. inat ettim bana msnden yardımcı olabilecek arkadaş lütfen eklesin. msn: xpurcom@hotmail.com Link to comment https://www.insanelymac.com/forum/topic/99092-problem-solved-x1600-xt-problem-with-kalyway-1052/#findComment-995894 Share on other sites More sharing options...
xpur Posted December 14, 2008 Share Posted December 14, 2008 please help, my graphic card (ati sapphire radeon x1600 pro 256mb pci-e): Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x71c2 Revision ID: 0x0000 Kernel Extension Info: No Kext Loaded Displays: Display: Resolution: 1024 x 768 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported * leopard 10.5.2 kalyway (intel) BIG QUESTION: how Quartz Extreme enabled ??? i am from turkish, bad speak english very sorry all method + reboot = black screen wait.. please solutions? Link to comment https://www.insanelymac.com/forum/topic/99092-problem-solved-x1600-xt-problem-with-kalyway-1052/#findComment-998389 Share on other sites More sharing options...
Recommended Posts