Toleman Posted January 28, 2006 Share Posted January 28, 2006 MacOS Tiger 10.4.3 Motherboard:Intel D915GULK Processor:Pentium 4 660+, 3,6 GHz with Gigabyte Rocket GT Heatsink cooler 4,000 r.p.m. Memory:2 G,two modules kingston 1G DDR2 533 MHz Hard disk:Western Digital Raptor 10,000 r.p.m. 74 G, serial ata DVD drive:Pioneer DVR-109 Case:Thermaltake Tsunami Dream PCI Ethernet card:AOpen,(buit in card doesn´t work with mac osx) Results 95.07 System Info Xbench Version 1.2 System Version 10.4.3 (8F1099) Physical RAM 2048 MB Model ADP2,1 Drive Type WDC WD740GD-00FLC0 CPU Test 75.65 GCD Loop 101.21 5.33 Mops/sec Floating Point Basic 83.44 1.98 Gflop/sec vecLib FFT 55.24 1.82 Gflop/sec Floating Point Library 77.48 13.49 Mops/sec Thread Test 114.90 Computation 98.77 2.00 Mops/sec, 4 threads Lock Contention 137.33 5.91 Mlocks/sec, 4 threads Memory Test 137.43 System 130.53 Allocate 133.34 489.66 Kalloc/sec Fill 127.56 6202.35 MB/sec Copy 130.82 2702.06 MB/sec Stream 145.09 Copy 140.63 2904.58 MB/sec Scale 142.32 2940.34 MB/sec Add 149.06 3175.25 MB/sec Triad 148.76 3182.43 MB/sec Quartz Graphics Test 105.24 Line 112.96 7.52 Klines/sec [50% alpha] Rectangle 105.03 31.36 Krects/sec [50% alpha] Circle 105.72 8.62 Kcircles/sec [50% alpha] Bezier 118.09 2.98 Kbeziers/sec [50% alpha] Text 89.23 5.58 Kchars/sec OpenGL Graphics Test 69.80 Spinning Squares 69.80 88.54 frames/sec User Interface Test 145.34 Elements 145.34 667.03 refresh/sec Disk Test 72.87 Sequential 113.24 Uncached Write 123.41 75.77 MB/sec [4K blocks] Uncached Write 122.33 69.22 MB/sec [256K blocks] Uncached Read 110.88 32.45 MB/sec [4K blocks] Uncached Read 99.73 50.12 MB/sec [256K blocks] Random 53.71 Uncached Write 19.49 2.06 MB/sec [4K blocks] Uncached Write 107.86 34.53 MB/sec [256K blocks] Uncached Read 125.36 0.89 MB/sec [4K blocks] Uncached Read 168.89 31.34 MB/sec [256K blocks] Link to comment Share on other sites More sharing options...
bofors Posted January 28, 2006 Share Posted January 28, 2006 Great, now try turning off Beam Sync.: http://forum.osx86project.org/index.php?showtopic=7288 PCI Ethernet card:AOpen,(buit in card doesn´t work with mac osx) Hmm... is that normal for that board? I think it should work but have not checked the HCL. EDIT: Apparently that is normal, my Intel D954GNT board's Gigabit Ethernet works fine but must use a different controller chip. Link to comment Share on other sites More sharing options...
matix Posted January 28, 2006 Share Posted January 28, 2006 Yes its the marvell yukon GigE, had one of these boards previously. Link to comment Share on other sites More sharing options...
Toleman Posted January 28, 2006 Author Share Posted January 28, 2006 Great, now try turning off Beam Sync.: http://forum.osx86project.org/index.php?showtopic=7288 Hmm... is that normal for that board? I think it should work but have not checked the HCL. Thanks bofors, the ethernet chip is a Marvell Yukon,incompatible with mac osX....i´ll try turning off beam sync and then post my results soon.. Yes its the marvell yukon GigE, had one of these boards previously. is a good ethernet for windows XP only, i switch between cards for each SO.. Link to comment Share on other sites More sharing options...
bofors Posted January 28, 2006 Share Posted January 28, 2006 ....i´ll try turning off beam sync and then post my results soon.. The Beam Sync. trick might only work with flat panels (which have no beam, of course), so let us know what kind of display you are working with when you post those results.\ BTW, how do you like your aluminum Thermaltake Tsunami Dream case? That looks like a good choice for an OSx86 box. Link to comment Share on other sites More sharing options...
Toleman Posted January 29, 2006 Author Share Posted January 29, 2006 The Beam Sync. trick might only work with flat panels (which have no beam, of course), so let us know what kind of display you are working with when you post those results.\ BTW, how do you like your aluminum Thermaltake Tsunami Dream case? That looks like a good choice for an OSx86 box. bad news,mine is a CRT monitor.........is a good case, except for the annoying pci retension sistem,(a plastic clips), in the other hand, yes, is a good choice in therms of cooling and the number of front expansion bays, the bad is the audio dongle, no intel HD Audio compilant (windows XP of course) but great for Tiger. Link to comment Share on other sites More sharing options...
bofors Posted January 29, 2006 Share Posted January 29, 2006 bad news,mine is a CRT monitor.... Did you try disabling Beam Sync. anyways? The LCD-only issue is just a unproven theory right now. Link to comment Share on other sites More sharing options...
Chief Posted February 12, 2006 Share Posted February 12, 2006 Thanks bofors, the ethernet chip is a Marvell Yukon,incompatible with mac osX....i´ll try turning off beam sync and then post my results soon..is a good ethernet for windows XP only, i switch between cards for each SO.. Hello Marvell Yukon working on GUXLK !!! Only change IONetworkingFamily.kext from 10.4.4 <Snipped - Violation> 1. Copy it in the extension folder and overwriting 2. rm extensions.mkext 3. rm extensions.kextcache 4. kextcache -k extensions 5. Reboot I thank "myzar" Link to comment Share on other sites More sharing options...
Toleman Posted February 15, 2006 Author Share Posted February 15, 2006 Hello Marvell Yukon working on GUXLK !!! Only change IONetworkingFamily.kext from 10.4.4 <Snipped - Violation> 1. Copy it in the extension folder and overwriting 2. rm extensions.mkext 3. rm extensions.kextcache 4. kextcache -k extensions 5. Reboot I thank "myzar" thank you chief, i copied the file (your step 1), but i don't understand the steps 2,3 and 4 please help i can't networking Link to comment Share on other sites More sharing options...
Toleman Posted February 15, 2006 Author Share Posted February 15, 2006 thank you chief, i copied the file (your step 1), but i don't understand the steps 2,3 and 4 please help i can't networking sorry, i did it, it works fine thanks chief Link to comment Share on other sites More sharing options...
Chief Posted March 12, 2006 Share Posted March 12, 2006 Hi Toleman I have too D915GUXLK, but audio input not working - you too ? Link to comment Share on other sites More sharing options...
Toleman Posted March 12, 2006 Author Share Posted March 12, 2006 Hi TolemanI have too D915GUXLK, but audio input not working - you too ? yes, it works Hi TolemanI have too D915GUXLK, but audio input not working - you too ? it works in both 10,4,3 and now in 10,4,5 Hi TolemanI have too D915GUXLK, but audio input not working - you too ? what kind of system do you have? OS version (and source), and processor... Link to comment Share on other sites More sharing options...
johnniecarcinogen Posted March 12, 2006 Share Posted March 12, 2006 I have the 915GUX also, I needed the azalea kext from 10.4.3 for audio on 10.4.4/5. Link to comment Share on other sites More sharing options...
Toleman Posted March 13, 2006 Author Share Posted March 13, 2006 I have the 915GUX also, I needed the azalea kext from 10.4.3 for audio on 10.4.4/5. ????? mine runs without modding audio....with 10,4,5 kext, the only kext i replaced is for the marvel yukon.... Link to comment Share on other sites More sharing options...
Chief Posted March 15, 2006 Share Posted March 15, 2006 yes, it worksit works in both 10,4,3 and now in 10,4,5 what kind of system do you have? OS version (and source), and processor... Motherboard: Intel D915GUXLK, Pentium 4 630 3.0 GHz., 2x512 of DDR2 533 MHz RAM, HD SATA 160 SEAGATE, 10.4.3 Server, CRT 19" NEC My audio input not working, i do not know As you can it help me Sorry for my english Link to comment Share on other sites More sharing options...
Toleman Posted March 16, 2006 Author Share Posted March 16, 2006 Motherboard: Intel D915GUXLK, Pentium 4 630 3.0 GHz., 2x512 of DDR2 533 MHz RAM, HD SATA 160 SEAGATE, 10.4.3 Server, CRT 19" NEC My audio input not working, i do not know As you can it help me Sorry for my english i'm surprised ....mine works fine, don't worried about your english, what is your native language, mine is spanish...i don't know if the azalia kext works for you... i'm surprised ....mine works fine, don't worried about your english, what is your native language, mine is spanish...i don't know if the azalia kext works for you... do you tried with tiger "standard" instead of server?... Link to comment Share on other sites More sharing options...
milton02 Posted March 19, 2006 Share Posted March 19, 2006 For the owner of Intel Boards with 900/950 integrated graphics: do you know if I can get also 1440x900 for my DVI LCD? Do I need to use ADD-2 card? thanks in advance Link to comment Share on other sites More sharing options...
Toleman Posted March 20, 2006 Author Share Posted March 20, 2006 For the owner of Intel Boards with 900/950 integrated graphics: do you know if I can get also 1440x900 for my DVI LCD? Do I need to use ADD-2 card?thanks in advance no in mine,(read my signature) i have a Dell LCD widescreen 1680x1050 and runs fine without any adapter or ADD-2 card..... no in mine,(read my signature) i have a Dell LCD widescreen 1680x1050 and runs fine without any adapter or ADD-2 card..... another thing....i used the VGA standard input instead of DVI... Link to comment Share on other sites More sharing options...
johnniecarcinogen Posted March 20, 2006 Share Posted March 20, 2006 I just double checked and realized I have a D915GEV not a GUX sry. But I think we use the same audio. And I have the Azalia kext loaded: EDIT: ok i just compared the GUX to the GEV and they are exactly the same except the GUX is mini atx and the GEV is ATX and has extra pci/pcie slots. GEV http://www.intel.com/products/motherboard/d915gev/index.htm GUX http://www.intel.com/products/motherboard/d915gux/index.htm Link to comment Share on other sites More sharing options...
Recommended Posts