oko Posted December 20, 2007 Share Posted December 20, 2007 Hi! I have nForce 650i SLi @ NB and nForce 430 MCP SLI @ SB . I have tried many versions of MacOs X but nothing work for me . I have no chance to get it? Oko My setup: *ABIT S775 NF650I SLI *MSI GeForce 8600 GT PCI-E 256MB OVERCLOCKED *Intel Q6600 CORE2 QUAD 2.4GHZ S775 *RAM KINGMAX 2048 mb DDR2 - 800 MHz running @ 667; CORSAIR 1024 mb 667 MHz CL5 (total 3GB of RAM running @ 667 MHz) *HDD 1. 200 GB IDE 2. 350 GB SATA 3. 400 GB SATA 4. 80 GB IDE * Floppy 1.4 MB 3½'' * USB 2.0 * LAN nForce Networking Controller * Fire Wire 400 on PCI slot Link to comment Share on other sites More sharing options...
agent-squirrel Posted December 20, 2007 Share Posted December 20, 2007 well for a start you are Probably going to have one hell of a time getting that core 2 quad to do anything, as far as i know mac os x only supports quad core Xeon processors. The Geforce i believe there are drivers lying around on here somewhere and numerous people have had endless trouble with the nForce Networking. Link to comment Share on other sites More sharing options...
oko Posted December 21, 2007 Author Share Posted December 21, 2007 Mac does not support Quad Core? I saw few pictures (aquamac) - he had Quad Core too. It was working fine! Before i got this terrible motherboard and videocard and other things i had a Pentium 4 running on OSX. I thing Quad Core can work faster... Anyway... What version of OSX can run on my damm computer? I have tried nac.nub , JAS 10.4.8 , JAS 10.4.6. , TUB 10.4.10 My setup: *ABIT S775 NF650I SLI *MSI GeForce 8600 GT PCI-E 256MB OVERCLOCKED *Intel Q6600 CORE2 QUAD 2.4GHZ S775 *RAM KINGMAX 2048 mb DDR2 - 800 MHz running @ 667; CORSAIR 1024 mb 667 MHz CL5 (total 3GB of RAM running @ 667 MHz) *HDD 1. 200 GB IDE 2. 350 GB SATA 3. 400 GB SATA 4. 80 GB IDE * Floppy 1.4 MB 3½'' * USB 2.0 * LAN nForce Networking Controller * Fire Wire 400 on PCI slot Link to comment Share on other sites More sharing options...
kadmiff Posted December 21, 2007 Share Posted December 21, 2007 Hi Mate, How hard have you tried.....? I have a Striker Extreme and A core 2 quad working with both 10.4 Tiger and 10.5 Leopard... I see you havent posted what your problems are!!! There is a thread with a guide specifically written for nforce mobos like ours and they work.... I can tell you that 10.4.8 jas will work for you and that 10.5 leopard with efi will work... as to how to fix your problems...? Cant help unless you specifically state whats wrong with jas only click the intel and the esentials (which you cant untick) Looking at your vid card I would suggest that you will have to delete the nvda and geforce kexts in -s mode to get it past the kernel panic... and there are threads on this... persistance pays off ... well sometimes ...LOL Cheers, Paul (kadmiff) Link to comment Share on other sites More sharing options...
oko Posted December 21, 2007 Author Share Posted December 21, 2007 If i install mac.nub 10.4.10 it hangs up on (see at pic). On JAS 10.4.10 it just hangs up on apple screen and ask me for restart. What did you say about 10.5 ? I havn't tried it yet... Does it support dualboot with VISTA? THX. Oko Link to comment Share on other sites More sharing options...
kadmiff Posted December 21, 2007 Share Posted December 21, 2007 for leopard, this is the thread for you... http://forum.insanelymac.com/index.php?showtopic=69705 as for Tiger... The only install i could get working perfectly was Jas 10.4.8 ...I would try that , but after install boot with f8 then -v -s and remove the kexts related to nvida and geforce ... then after it boots go hunt down the right drivers for your video ... Ps: Leopard can dual boot with vista, however ... If you format guid then only 64bit versions will work xp 64 vista 64.. I would use a seperate h/disk for vista as this is safer ... that way you can select usin the standard f8 on boot for boot list... Mbr partition will let you use the 32 bit versions of vista and xp , but resizing partitions on the fly is not possible... Cheers, Paul (kadmiff) Link to comment Share on other sites More sharing options...
oko Posted December 21, 2007 Author Share Posted December 21, 2007 Thanks! I am going to install Leopard! I will post for news! Link to comment Share on other sites More sharing options...
oko Posted December 22, 2007 Author Share Posted December 22, 2007 OK. Nothing works... When it installs Leopard it just restarts at 1/2 of the process. I will try 10.4.8 --> 10.4.9 --> 10.4.10 --> 10.5.0 --> 10.5.1 way... OK... How can i delete GeForce drivers? Link to comment Share on other sites More sharing options...
Hyper Salad Posted December 22, 2007 Share Posted December 22, 2007 OK, I feel really down because I've tried so hard to get OSX working on my config: CPU: Core Duo e6850 MOBO: XFX 680i LT RAM: OCZ Reaper X - 4GB Vid Card: 8800GT I tried JaS 10.4.7, JaS 10.4.8, Uphuck 10.4.9, Toh 10.5.0, iAikos 10.5.1 and Kalyway 10.5.1 the only one that semi worked was 10.4.8 - Runs fine...although OSX didnt recognize my PCI slots nor did it like restarting (shutdown was fine, but all important apps will NEED a reboot to install correctly) Has anyone got a fix for the PCI slot thing? or the reboot thing? just to add... I got these kext errors in verbose mode IOPCIfamily IOGraphicsFamily IONDRVsupport NVDAResman i deleted all of them but this didnt help me with the pci issue, so i tried installing the IOPCIfamily kext from JaS 10.4.7 with no joy OK. Nothing works... When it installs Leopard it just restarts at 1/2 of the process.I will try 10.4.8 --> 10.4.9 --> 10.4.10 --> 10.5.0 --> 10.5.1 way...OK... How can i delete GeForce drivers? Oh this I can answer! you delete the Geforce Drivers by pressing F8 then type -s -v then wait a sec and type: /sbin/ mount -uw / hit enter type: rm -rf /System/Library/Extensions/Geforce.kext hit enter then type: reboot hit enter and then reboot see if that works Link to comment Share on other sites More sharing options...
oko Posted December 22, 2007 Author Share Posted December 22, 2007 Thanks! Hyper salad have you tried this gudige? http://forum.insanelymac.com/index.php?showtopic=73199 _______________________________________________________ *ABIT S775 NF650I SLI *MSI GeForce 8600 GT PCI-E 256MB OVERCLOCKED *Intel Q6600 CORE2 QUAD 2.4GHZ S775 *RAM KINGMAX 2048 mb DDR2 - 800 MHz running @ 667; CORSAIR 1024 mb 667 MHz CL5 (total 3GB of RAM running @ 667 MHz) *HDD 1. 200 GB IDE 2. 350 GB SATA 3. 400 GB SATA 4. 80 GB IDE * Floppy 1.4 MB 3½'' (i realy need it ) * USB 2.0 * LAN nForce Networking Controller * Fire Wire 400 on PCI slot Link to comment Share on other sites More sharing options...
Hyper Salad Posted December 22, 2007 Share Posted December 22, 2007 Thanks! Hyper salad have you tried this gudige? http://forum.insanelymac.com/index.php?showtopic=73199 Yup, followed it to the word and got up to the point of doing the bootfix and then rebooting... but it just hangs at "verifying pool data"... Link to comment Share on other sites More sharing options...
oko Posted December 23, 2007 Author Share Posted December 23, 2007 HELLYEAH!!! 10.4.8 now works! I need to update it to 10.4.10? I need Ethernet drivers... Whose drivers can work with my nForce networking onboard card? _______________________________________________________ *ABIT S775 NF650I SLI *MSI GeForce 8600 GT PCI-E 256MB OVERCLOCKED *Intel Q6600 CORE2 QUAD 2.4GHZ S775 *RAM KINGMAX 2048 mb DDR2 - 800 MHz running @ 667; CORSAIR 1024 mb 667 MHz CL5 (total 3GB of RAM running @ 667 MHz) *HDD 1. 200 GB IDE 2. 350 GB SATA 3. 400 GB SATA 4. 80 GB IDE * Floppy 1.4 MB 3½'' (i realy need it ) * USB 2.0 * LAN nForce Networking Controller * Fire Wire 400 on PCI slot Link to comment Share on other sites More sharing options...
KellyKelly Posted December 23, 2007 Share Posted December 23, 2007 mine is fully working Link to comment Share on other sites More sharing options...
oko Posted December 24, 2007 Author Share Posted December 24, 2007 Caminoz - wich version of MacOs you have installed? Link to comment Share on other sites More sharing options...
oko Posted December 27, 2007 Author Share Posted December 27, 2007 Hi! I got Leo to boot! I use THIS GUDIGE but i don't did a bootfix because i update 10.4.9 to 10.5.0 (i think bootfix is bot neccesary for me) OK. I have problem with the 22 and 23 . Marvin's AMD Utility said some error and didn't create the cpuid.txt file on the Folder on desktop... In the folder was log file and 1 other file witch wasn't cpuid.txt Ohh and the 32 and 33. When i open the 10.5.1 update with Pacifist 2.5.1 i don't know where i can do this: Select and install everything except what I have listed below: CODE/mach_kernel /System/Library/Extensions/ AppleACPIPlatform.kext AppleIntelIntegratedFramebuffer.kext ApplePS2Controller.kext AppleSMBIOS.kext dsmos.kext IOATAFamily.kext IOAHCIFamily.kext AppleAC97Audio.kext AppleAHCIPort.kext AppleAzaliaAudio.kext AppleVIA.kext AppleVIAATA.kext IOHDIXController.kext IONetworkingFamily.kext NVDANV10HAL.kext NVDANV20HAL.kext NVDANV30HAL.kext NVDANV40HAL.kext NVDANV50HAL.kext NVDAResman.kext GeForce.kext It installed a file and my Mac crashed. What i have to do in next time? Oko _______________________________________________________ *ABIT S775 NF650I SLI *MSI GeForce 8600 GT PCI-E 256MB OVERCLOCKED *Intel Q6600 CORE2 QUAD 2.4GHZ S775 *RAM KINGMAX 2048 mb DDR2 - 800 MHz running @ 667; CORSAIR 1024 mb 667 MHz CL5 (total 3GB of RAM running @ 667 MHz) *HDD 1. 200 GB IDE 2. 350 GB SATA 3. 400 GB SATA 4. 80 GB IDE * Floppy 1.4 MB 3½'' (i realy need it ) * USB 2.0 * LAN nForce Networking Controller * Fire Wire 400 on PCI slot Link to comment Share on other sites More sharing options...
oko Posted January 5, 2008 Author Share Posted January 5, 2008 BUMP Link to comment Share on other sites More sharing options...
Recommended Posts