Jump to content
11 posts in this topic

Recommended Posts

Hello, I am trying to install ToH release of leopard and im getting the message "still waiting for root device" I have read most of the post and its telling me to change the ICH9 to AHCI mode, I tried that and still no luck. I have also tried puting the hard drive on the JMicron controller but that does not seem to work either. I think I have tried almost ever combination, If anyone could help me out I would really appriciate it.

 

Here are my specs

 

Motherboard = GA-P35-DS3R - rev 2 I belive

CPU = Intel E6750

Hard Drives = 2 120GB SATA - seagate

DVD-RW Drive = Liteon SOHW-1693S

Graphics = Nvidia 7600GT

 

Thank you

I did a search nothing helped, I have tried the purple with and without the AHCI mode and still nothing. I have also tried a 10.4.10 release I hace and a 10.4.6 release and still get the same message.I dont have any red sata connection only Yellow and purple. I thought it might have been because I didnt have to drive set at the right formate so I reformatted to FAT32 and only hooked up that drive....still no luck, I tried it in all of the sata connections Yellow and Purple

Well If you cant find any more answers, i would get a sata dvd-rw, reason being is cause your ide is jmicron and that usually is not supported. and i had the same problem with my ide harddrive and it wouldnt find it. So I would say get sata dvdrw if you cant get it to work.

Hi

I must admit I agree with 3vilution get a sata dvd drive. I have a GA-P35C DS3R rev 2.0

something very simular to your own and It works like a treat (no sound at first but fixable).

Don't use JMicron only ACHI. I have all the drives in the orange SATA ports.

Hope this helps :)

Ok, I picked me up a sata dvd drive and I am no longer getting the "still waiting for root device" , it goes past it and continues on to the set up and then when i get to about 15% of the install it says install failed reboot machine..any tips on how to get this thing installed on my system, do I need to prep anything before I install it, like change anything in the bios unplug anything from the mobo or do a custom install

 

I am using the ToH install disk

 

I also have another disk that is version 10.4.10 but for some reason im still getting the "still waiting for root device"

 

if you can give me any kind of help that would be deeply appreciated

×
×
  • Create New...