Really Fenix Posted February 23, 2009 Share Posted February 23, 2009 Как догнал шо я из России?? После перезагрузки был чёрный экран? Если ДА, то как долго. Кстати ты помимо AsusF3SE_ReallyFenix.kext.zip (внутри лежит ATIinject.kext) устанавливал 10.5.5 (внутри лежат ATINDRV.kext и ATIRadeonX1000.kext)? Ещё вопрос ты случайно устанавливаешь не из-под win XP?? No black screen, Only AsusF3SE_ReallyFenix.kext.zip(Atiinject) + original ATINDRV.kext or AsusF3SE_city10001.kext.zip + original ATINDRV.kext standart boot with no problem and no 1280x800 ! Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1088838 Share on other sites More sharing options...
city10001 Posted February 23, 2009 Share Posted February 23, 2009 i use AsusF3SE_city10001.kext.zip+ATINDRV.kext(from 10.5.5.zip)=Black screen -Death Really Fenix loading original ATINDRV.kext and Screenshot from display Феникс как догнал шо я из России?? Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1088866 Share on other sites More sharing options...
righteye Posted February 23, 2009 Author Share Posted February 23, 2009 i use AsusF3SE_city10001.kext.zip+ATINDRV.kext(from 10.5.5.zip)=Black screen -Death Really Fenix loading original ATINDRV.kext and Screenshot from display Феникс как догнал шо я из России?? In order to bypass the black screen be sure you have the ATIRadeonx1000.kext posted above. Must be HEX edited with the Device ID: 0x71d5 and must have the same version as the other related ATIRadeonx1000 files. Also check the permisions for IOPCIFamily.kext. (chown -> chmod it) then reboot -v -f Cheers Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1088955 Share on other sites More sharing options...
Really Fenix Posted February 23, 2009 Share Posted February 23, 2009 i use AsusF3SE_city10001.kext.zip+ATINDRV.kext(from 10.5.5.zip)=Black screen -Death Really Fenix loading original ATINDRV.kext and Screenshot from display Феникс как догнал шо я из России?? Read PM! In order to bypass the black screen be sure you have the ATIRadeonx1000.kext posted above. Must be HEX edited with the Device ID: 0x71d5 and must have the same version as the other related ATIRadeonx1000 files. Also check the permisions for IOPCIFamily.kext. (chown -> chmod it) then reboot -v -f Cheers Hi can u tell me what files must be in system for 1280x800 only ATINDRV.kext+ATIinject.kext ? or ATINDRV.kext+ATIinject.kext+ATIRadeonX1000.kext ? or other? and what i must replace? Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1088971 Share on other sites More sharing options...
righteye Posted February 23, 2009 Author Share Posted February 23, 2009 Read PM!Hi can u tell me what files must be in system for 1280x800 only ATINDRV.kext+ATIinject.kext ? or ATINDRV.kext+ATIinject.kext+ATIRadeonX1000.kext ? or other? and what i must replace? ATINDRV.kext + ATIRadeonX1000.kext + ATIinject.kext with the good EDID in the info.plist Also you my try the Natit.kext made by DiaboliK ... but also in that you have to place the correct EDID in the info.plist Under Vista is hard to get the correct EDID you will get the error "Bad EDID" I'll post later the Natit.kext with the city10001's EDID Here you go: NatitAsusF3SE.kext.zip NatitX1600AsusF3SE.kext.zip use only one at once and remove the Atiinject. Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1089198 Share on other sites More sharing options...
city10001 Posted February 24, 2009 Share Posted February 24, 2009 ATINDRV.kext + ATIRadeonX1000.kext+NatitAsusF3SE.kext.zip =Default ATINDRV.kext + ATIRadeonX1000.kext+NatitX1600AsusF3SE.kext.zip=Black screen -Death loading with -v -f don't work Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1089774 Share on other sites More sharing options...
righteye Posted February 24, 2009 Author Share Posted February 24, 2009 ATINDRV.kext + ATIRadeonX1000.kext+NatitAsusF3SE.kext.zip =DefaultATINDRV.kext + ATIRadeonX1000.kext+NatitX1600AsusF3SE.kext.zip=Black screen -Death loading with -v -f don't work Tell me the version of your ATIRadeonX1000GA.plugin in /System/Library/Extensions folder ... Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1090426 Share on other sites More sharing options...
city10001 Posted February 25, 2009 Share Posted February 25, 2009 ATIRadeonX1000GA 1.5.30.17(6060) Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1090770 Share on other sites More sharing options...
Really Fenix Posted February 25, 2009 Share Posted February 25, 2009 finally full resolution 1280x800 thanks to righteye ATINDRV.kext + ATIRadeonX1000.kext+NatitAsusF3SE.kext.zip =Default ATINDRV.kext + ATIRadeonX1000.kext+NatitAsusF3SE.kext.zip+ATIinject.kext(will post later) = 1280x800(and other resolutions) but one moment, my card id is 0x71de1002, in Info.plist is 0x71d51002 but it works! when i try to change that to 0x71de1002 a get no result! Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1090801 Share on other sites More sharing options...
city10001 Posted February 25, 2009 Share Posted February 25, 2009 this cool :censored2: loading screenshot from display and ATIinject.kext Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1090900 Share on other sites More sharing options...
phoenixfire425 Posted February 27, 2009 Share Posted February 27, 2009 Hello, First i want to thank you for working on this project. I have an Asus G2P and i am trying to get the video drivers working. so far i can only get the default resolution to display. and i have tried many of the combinations of kext file, but sadly i either get the black screen or the blue lines. Is there a way to get this to work yet? and if not anyway i can help to get this to work? Thank You I just tried this pack http://www.insanelymac.com/forum/index.php...st&id=39764 and now it loads and i am able to load up the UI BUT it show just the cursor and it apears to be 1280x800 res but it will not load the desktop or anything. it just hangs. and i am not sure howto correct this.. Thank You I just tried this pack http://www.insanelymac.com/forum/index.php...st&id=39764 and now it loads and i am able to load up the UI BUT it show just the cursor and it apears to be 1280x800 res but it will not load the desktop or anything. it just hangs. and i am not sure howto correct this.. Thank You Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1092818 Share on other sites More sharing options...
phoenixfire425 Posted February 27, 2009 Share Posted February 27, 2009 I ended up dumping the OS and starting all over.. Anyone. can you help me get the right kext or driver setup here is my config Asus G2P Running on clean install of 10.5.6 What i need help with X1700 Graphics card Audio (have audio its just not that great of quality) Anyone's help would be very much appreciated Thank You Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1093510 Share on other sites More sharing options...
city10001 Posted February 28, 2009 Share Posted February 28, 2009 use Phoenix EDID Designer and load here yours EDID Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1093844 Share on other sites More sharing options...
Really Fenix Posted March 1, 2009 Share Posted March 1, 2009 hi i used this files for full resolution 1280x800 on my asus f3se with x1700(x2500) ati radeon NatitAsusF3SE.kext.zip ATIRadeonX1000.kext.rar ATINDRV.kext.rar ATIinject.kext.rar Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1094826 Share on other sites More sharing options...
realkingu Posted March 1, 2009 Share Posted March 1, 2009 Hi everything! firs of all sorry for my bad english! :-) i´m a completly newbie mac user (well.. mac user.. atkos 5 user). after many tries finally i´ve got my system running ok, at least i think almost all its working fine. but not my graphic card. i´ve a Packard bell laptop, and in windows only have to download the driver and double click and got my graphic card working. but in mac system i´m completly lost!, i´m reading almost every page of this post (even whith the {censored} connection i´ve now!), and i can read about kext files and editing this files. so sorry but you can help me?, you can tell me how to do this, from the very beginning? (yes a idiot.. er.. completly newbie guide (i told u i came from windoes and all know about install is make double click?)). My laptop description (if it helps u): Packard Bell BV EASYNOTE SW86 2,00 gigahertz Intel Core 2 Duo 2 gb ram ATI Mobility Radeon X1700 (256mb) thank u ! Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1094966 Share on other sites More sharing options...
city10001 Posted March 1, 2009 Share Posted March 1, 2009 finally full resolution 1280x800 thanks to righteye Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1095098 Share on other sites More sharing options...
andersson paul Posted March 1, 2009 Share Posted March 1, 2009 Right eye, at the installation do you choose Apple HDA ? Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1095124 Share on other sites More sharing options...
righteye Posted March 2, 2009 Author Share Posted March 2, 2009 Right eye, at the installation do you choose Apple HDA ? Yes and remove the ALCINJECT.kext from extensions folder Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1095818 Share on other sites More sharing options...
andersson paul Posted March 2, 2009 Share Posted March 2, 2009 Yes and remove the ALCINJECT.kext from extensions folder What are the changes ? (I don't choose it at the installation) & There are 2 addreses (what does that mean)? Thanks Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1096406 Share on other sites More sharing options...
phoenixfire425 Posted March 2, 2009 Share Posted March 2, 2009 use Phoenix EDID Designer and load here yours EDID here are my files for you edid.zip Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1096605 Share on other sites More sharing options...
phoenixfire425 Posted March 3, 2009 Share Posted March 3, 2009 Hello, Maybe i am doing this wrong. I have enable Quartz GL with "OSx86tools" and when installing the Kext i use "OSx86Tools" then i reboot with the -F and I either get a black screen or i get the kernel text, and sometimes i get the default. i have tried so many combinations of kext files and i cannot seem to get it right. Can i have a detail of steps i should take. I just started a clean install of 10.5.6 with the "iPC OSx86 10.5.6 Universal DVD" So where should i go from there. What kext installer should i use and what process should i take to get this to work. Thank You Very Very Much. Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1096754 Share on other sites More sharing options...
righteye Posted March 3, 2009 Author Share Posted March 3, 2009 What are the changes ? (I don't choose it at the installation) & There are 2 addreses (what does that mean)? Thanks That means there is one for the Desktop version and one for Laptop but not shure ... that's why i put one in the installer i made ... and for shure that one is correct. Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1097066 Share on other sites More sharing options...
phoenixfire425 Posted March 3, 2009 Share Posted March 3, 2009 Also i tried the installer from the very first post. and with all the items selected. I loose sound and video. but when i take out all the files for video and sound that the installer installed. then i boot fine. but still no hi-res. Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1097255 Share on other sites More sharing options...
andersson paul Posted March 3, 2009 Share Posted March 3, 2009 That means there is one for the Desktop version and one for Laptop but not shure ... that's why i put one in the installer i made ... and for shure that one is correct. Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1097259 Share on other sites More sharing options...
andersson paul Posted March 3, 2009 Share Posted March 3, 2009 I have install your ASUS g2p installer, But nothing change the track padh don't work, the keyboard don't work, the time don't work, the bluetooth don't work, the line in don't work & the ethernet don't work . Why i don't know ! Link to comment https://www.insanelymac.com/forum/topic/70843-ati-mobility-radeon-x1700/page/20/#findComment-1097301 Share on other sites More sharing options...
Recommended Posts