fus1on Posted November 4, 2007 Share Posted November 4, 2007 I have tried booting from the DVD and that works fine, i get to the darwin screen that says press any key to install or F8 for options. If i press anykey i get 'starting darwin' then the PC reboots. If i choose F8 i get the exact same problem. I have tried using the -v command but it doesnt give any error messages just reboots the pc. I have: Asus A8n-E Mobo AMD 64 X2 3800+ CPU Nvidia 7600GS Graphics 1 SATA 250Gb HDD (Vista installed) 1 IDE 160Gb HDD partitioned to HFS using 'diskpart' 1 USB 60Gb HDD Partitioned to HFS using 'diskpart' I have tried removing all disk drives except for the DVD + IDE / USB HDD but i still get the same problem. The DVD i have is Jas AMD / Intel SSE2 SSE3 + PPF1 PPF2. Burned using nero at slowest speed possible. Ideally i want mac installed to the USB drive although if i can only do it on the IDE then thats fine too. I have searched many many times but cant find a resolution..... Any ideas where im going wrong? Link to comment Share on other sites More sharing options...
fus1on Posted November 4, 2007 Author Share Posted November 4, 2007 If it helps at all this is what shows on screen before the reboot when i use the '-v' command..... Darwin/x86 boot v5.0.132 1023Mb memory Vesa V3.0 256Mb (nvidia) Loading Darwin/x86 Loading kernel mach_kernel Loading HFS+ file: [mach_kernel] from 4230450 Loading HFS+ file: [mach_kernel] from 4230450 Loaddrivers: Loading from: [/system/library/extensions.mkext] Loading HFS+ file: [/system/library/extensions.mkext] from 4230450 Loading HFS+ file: [/system/library/extensions.mkext] from 4230450 Starting Darwin/x86... Then the PC reboots and it does the same over again. Link to comment Share on other sites More sharing options...
Recommended Posts