TA_Superman Posted September 29, 2007 Share Posted September 29, 2007 Hoping someone can help me here. I have a Dell XPS m1330 running OSX 10.4.10. Well I read about AppleHDA patcher for getting your sound to work. I went into my linux live cd and dumped the card info and ran AppleHDAPatcher. The card is detected now only thing is sound will not come out through the speakers only through the headphones when connected. It is a Sigmatel 9228 card. The laptop itself has 2 speakers, 2 headphone jacks and a input jack + microphone array. Here is the linux dump. Hope someone can give me some suggestions. Codec: SigmaTel STAC9228 Address: 0 Vendor Id: 0x83847616 Subsystem Id: 0x10280209 Revision Id: 0x100201 Default PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=0 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x66 0x66] Power: 0x0 Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Power: 0x0 Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Power: 0x0 Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x66 0x66] Power: 0x0 Node 0x06 [Vendor Defined Widget] wcaps 0xfd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Power: 0x0 Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x1b Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x1c Node 0x09 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x1d Node 0x0a [Pin Complex] wcaps 0x400181: Stereo Pincap 0x08173f: IN OUT HP Detect Pin Default 0x0221101f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Black Pin-ctls: 0xc0: OUT HP Connection: 2 0x02* 0x03 Node 0x0b [Pin Complex] wcaps 0x400181: Stereo Pincap 0x08173f: IN OUT HP Detect Pin Default 0x40f000f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Connection: 2 0x02* 0x03 Node 0x0c [Pin Complex] wcaps 0x400181: Stereo Pincap 0x081737: IN OUT Detect Pin Default 0x40f000f1: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Connection: 1 0x03 Node 0x0d [Pin Complex] wcaps 0x400181: Stereo Pincap 0x08173f: IN OUT HP Detect Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown Pin-ctls: 0x40: OUT Connection: 1 0x02 Node 0x0e [Pin Complex] wcaps 0x400181: Stereo Pincap 0x081737: IN OUT Detect Pin Default 0x02a11030: [Jack] Mic at Ext Front Conn = 1/8, Color = Black Pin-ctls: 0x24: IN Connection: 1 0x04 Node 0x0f [Pin Complex] wcaps 0x400181: Stereo Pincap 0x081737: IN OUT Detect Pin Default 0x02011020: [Jack] Line Out at Ext Front Conn = 1/8, Color = Black Pin-ctls: 0x40: OUT Connection: 1 0x05 Node 0x10 [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0837: IN OUT Detect Pin Default 0x40f000f2: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Connection: 1 0x04 Node 0x11 [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0837: IN OUT Detect Pin Default 0x40f000f3: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Connection: 1 0x03 Node 0x12 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x40f000f4: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Node 0x13 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x90a60040: [Fixed] Mic at Int N/A Conn = Digital, Color = Unknown Pin-ctls: 0x20: IN Node 0x14 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x40f000f5: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 9 0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11 Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 9 0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11 Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 9 0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11 Node 0x18 [Audio Selector] wcaps 0x300103: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x00 0x00] Connection: 1 0x15 Node 0x19 [Audio Selector] wcaps 0x300103: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x00 0x00] Connection: 1 0x16 Node 0x1a [Audio Selector] wcaps 0x300103: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x00 0x00] Connection: 1 0x17 Node 0x1b [Audio Selector] wcaps 0x30090d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Connection: 3 0x18* 0x13 0x14 Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Connection: 3 0x19* 0x13 0x14 Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Connection: 3 0x1a* 0x13 0x14 Node 0x1e [Audio Output] wcaps 0x40211: Stereo Digital PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Node 0x1f [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital Node 0x20 [Audio Input] wcaps 0x140311: Stereo Digital PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Connection: 1 0x22 Node 0x21 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x185610a0: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Black Pin-ctls: 0x00: Connection: 5 0x1e* 0x1f 0x1b 0x1c 0x1d Node 0x22 [Pin Complex] wcaps 0x430681: Stereo Digital Pincap 0x0810024: IN EAPD Detect Pin Default 0x40f000f6: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Power: 0x0 Node 0x23 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0 Amp-Out vals: [0x00] Node 0x24 [Volume Knob Widget] wcaps 0x600000: Mono Link to comment Share on other sites More sharing options...
markiemark Posted September 30, 2007 Share Posted September 30, 2007 hi, I'm sorry i don't know an answer for your problem but i'm curious. Which install did you use for 10.4.10. I also have a m1330 and used the uphuck and kalway but both were unsuccesfull. i hope you can help me? thanks in advance. markiemark Link to comment Share on other sites More sharing options...
TA_Superman Posted September 30, 2007 Author Share Posted September 30, 2007 I used Uphuck 10.4.9 1.3. When the cd boots press f8 to enter startup options. I used "-v cpus=1". Then it will start to boot up. It will stall when it says something about IOAPIC. So what I did was eject the cd then pop it back in right away, this unstalls this part. After it will bootup fine. Install OSX as normal with Intel SSE3-2 kernel. After that i upgraded to 10.4.10 without nvidia kexts. Link to comment Share on other sites More sharing options...
macgirl Posted October 2, 2007 Share Posted October 2, 2007 I also have sound only thru headphones, but this is not strange to me, I reinstalled vista and that driver have the same problem, only after I installed the driver of Dell I got sound from speakers. Link to comment Share on other sites More sharing options...
TheMaxx32000 Posted October 18, 2007 Share Posted October 18, 2007 combined-jack problem... NodeID's are set incorrectly for combined-jacks. Thats why you can add NodeID's for line-out, hp, speaker, mic and line in und you will have 5 devices showing up, but in vista there are only 2? or 3?... So, the right combination is needed here, and I was too lazy to figure it out, since wireless does not work in my M1330 with original Apple AR5008X card Link to comment Share on other sites More sharing options...
sfxc13 Posted November 6, 2007 Share Posted November 6, 2007 Anybody ever figure this out? Link to comment Share on other sites More sharing options...
Carlchen Posted December 30, 2007 Share Posted December 30, 2007 curious to know as well. I need sound for audio recording, has anyone found a workaround? I'm about to ditch my 1400 vostro and just buy a new laptop next month. Link to comment Share on other sites More sharing options...
macgirl Posted December 31, 2007 Share Posted December 31, 2007 A fast and reliable solution for you is an USB Soundcard, there are a lot of cheap ones though. Link to comment Share on other sites More sharing options...
meatwad64 Posted January 10, 2008 Share Posted January 10, 2008 with a usb soundcard can you have sound through the internal speakers? I was under the impression you would need external speakers to have sound with a usb soundcard. Link to comment Share on other sites More sharing options...
macgirl Posted January 10, 2008 Share Posted January 10, 2008 Of course you need external speakers, but there are also USB speakers (like an USB soundcard is already integrated). The only way to get internal speakers working with USB soundcard is to solder the internal speakers to a cable that go to the usb soundcard output jack. Link to comment Share on other sites More sharing options...
Recommended Posts