Jump to content
Schweppes

10.4.10 update INSTALLER (available for download)

166 posts in this topic

Recommended Posts

like at http://forum.insanelymac.com/index.php?sho...=54678&st=0 :

 

================ BASIC PROCEDURE ================

BACKUP (kernel and Extensions):

sudo cp -R /System/Library/Extensions /System/Library/Extensions.10.4.9

sudo cp /mach_kernel /mach_kernel.jun07

RUN UPGRADE: (I personnaly don t install the 10.4.10 Graphcis)

 

do not reboot when prompted

 

cp the mach_amd or intel in /mach_kernel

chown root:wheel /mach_kernel

chmod 644 /mach_kernel

cp -R dsmos.kext /System/Library/Extensions

 

then reboot....

 

If problem look at http://forum.insanelymac.com/index.php?sho...=54678&st=0

 

 

mhmh i didn't replace the kernel after the update.. i had no problem except the nvidia installer :S

maybe that's the reason?

Share this post


Link to post
Share on other sites
Advertisement
cp -R dsmos.kext /System/Library/Extensions

6 - From your /1049 folder, recover AppleHDA.kext, Intel950.kext,

 

AppleIntelIntegratedFramebuffer.kext

 

Not sure if copying Intel950.kext is really necessary, I am using the 10.4.10 kext here without any problems.

Recovering the old AppleIntelIntegratedFramebuffer.kext is *very* important however before rebooting.

Share this post


Link to post
Share on other sites

ok im back to a full working 10.4.9 and i think ill wait till a better step by step comes out. i had 10.4.10 working with older system.kext and kernel and it didnt work right. usb hd wouldnt mount and i had to do a hack to even get dmg to mount. either that or the iphone requires the new kernel to be detected.

Share this post


Link to post
Share on other sites

Thanks, this installer works GREAT :poster_oops: Applied the update today on my machine (specs below) and then installed the GMA950 from the Jas 10.4.8 installer, and fixed up the audio using Taruga's audio patch.

Share this post


Link to post
Share on other sites

Does not work for me (desktop in sig). Ran the update, copied the kernel and dsmos in, set permissions. Could only boot in safe mode after that. I would not see anything but a blue screen where the login window should have been. Was not a problem with loginwindow.app though cause as I said could enter safe mode. Tried re-installing Natit, same result. Tried replacing with 10.4.9 kexts, same result. Had to restore my kernel then had to restore all my 8.9.1 kexts

Share this post


Link to post
Share on other sites

Im new on this but the automatic upgrade package run perfectly... Thanks to the people who get this together... love this forum....

 

 

I just install 10.4.9 uphuck dvd v1.3 then apply this upgrade... Works perfect... 10.4.10 working... ;):thumbsup_anim:

Share this post


Link to post
Share on other sites
Hello all,

 

For those who have successfully updated to 10.4.10....

 

Is there any real improvements or noticable differences between 10.4.8 and 10.4.10 (Other then the rush of getting it to work)?

 

 

yes, my xbench down to 109, but in less words....it's the same performance than the 10.4.8.

 

edit: sorry it's a little bit faster and responsive after onyx system scripts, my xbench looks like this:

 

Results 114.28

System Info

Xbench Version 1.3

System Version 10.4.10 (8R2218)

Physical RAM 2048 MB

Model ACPI

Drive Type WDC WD740GD-00FLC0

CPU Test 78.11

GCD Loop 108.92 5.74 Mops/sec

Floating Point Basic 86.23 2.05 Gflop/sec

vecLib FFT 55.52 1.83 Gflop/sec

Floating Point Library 80.52 14.02 Mops/sec

Thread Test 116.82

Computation 94.21 1.91 Mops/sec, 4 threads

Lock Contention 153.71 6.61 Mlocks/sec, 4 threads

Memory Test 124.52

System 107.62

Allocate 79.06 290.34 Kalloc/sec

Fill 132.69 6451.48 MB/sec

Copy 130.03 2685.71 MB/sec

Stream 147.71

Copy 145.12 2997.40 MB/sec

Scale 144.93 2994.26 MB/sec

Add 150.01 3195.51 MB/sec

Triad 151.00 3230.17 MB/sec

Quartz Graphics Test 113.56

Line 118.61 7.90 Klines/sec [50% alpha]

Rectangle 111.13 33.18 Krects/sec [50% alpha]

Circle 111.69 9.10 Kcircles/sec [50% alpha]

Bezier 114.24 2.88 Kbeziers/sec [50% alpha]

Text 112.42 7.03 Kchars/sec

OpenGL Graphics Test 238.86

Spinning Squares 238.86 303.00 frames/sec

User Interface Test 182.83

Elements 182.83 839.09 refresh/sec

Disk Test 74.63

Sequential 115.75

Uncached Write 141.54 86.91 MB/sec [4K blocks]

Uncached Write 126.04 71.31 MB/sec [256K blocks]

Uncached Read 98.72 28.89 MB/sec [4K blocks]

Uncached Read 106.06 53.30 MB/sec [256K blocks]

Random 55.06

Uncached Write 20.18 2.14 MB/sec [4K blocks]

Uncached Write 109.69 35.11 MB/sec [256K blocks]

Uncached Read 126.69 0.90 MB/sec [4K blocks]

Uncached Read 164.44 30.51 MB/sec [256K blocks]

Share this post


Link to post
Share on other sites

To get one thing clear, this is a delta update, wich mean you cannot uprgrade from anything but from 10.4.9 to 10.4.10. So ofcourse it will fail if you try to upgrade from 10.4.8 or something.

Share this post


Link to post
Share on other sites

thats what i was thinking...

 

i think i'll do a (apple) combo 10.4.9 then this one before rebooting. will try it on my spare partition first of course ;)

Share this post


Link to post
Share on other sites
thats what i was thinking...

 

i think i'll do a (apple) combo 10.4.9 then this one before rebooting. will try it on my spare partition first of course :)

 

Or I could make a combo installer...Maybe when I have some spare time this week.

Share this post


Link to post
Share on other sites

Broke my CDROM (doesnt recognise when discs are inserted)

 

Broke my GMA950 Graphics (only have 1024x768 resolution)

 

But asides from that it works, which at leasts means I have something I can fix!

Share this post


Link to post
Share on other sites
To get one thing clear, this is a delta update, wich mean you cannot uprgrade from anything but from 10.4.9 to 10.4.10. So ofcourse it will fail if you try to upgrade from 10.4.8 or something.

 

That's a funny thing to hear, because that's exactly what I did - I went straight from 10.4.8 to 10.4.10 without any problems using the update. Only had to fix the Framebuffer-kext.

Share this post


Link to post
Share on other sites

Just to say that I´m skeewiff. Somebody created an account with the name ¨skeewif¨ (note one less f) I think he´s trying to hijack my nick by posting stupid things like a post in this topic:

fake ¡¡¡

 

kernel 8.10.1 no source code release for Apple

http://www.opensource.apple.com/darwinsource/

pleaz I´m member since 11-August 05, Could the moderators do something?

Share this post


Link to post
Share on other sites
My boot went too slow after habging on such messages:

lauchd:com.apple.nibindd: exited abnormally, Bad system call

lauchd:com.apple.nibindd: responding too quickly! throttling

lauchd:com.apple.nibindd: too many failures in seccession

lauchd:com.apple.nibindd: Server 175 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[104]: exited abnormally: Hangup;

lauchd:com.apple.nibindd: Server 0 in bootststrap 1103 uid 0: "/usr/sbin/lookupd"[200]: exited ubnormally: bad system call

 

And so on with other Servers. Also thre were messages about LoginWindow.app, also hanging. Help please.

 

 

JasT

First: please put your SystemSpecs to your Signature

 

 

I had the same problem. I fixed it with a new loginwindow (for AMD I think), wich you get at the end of this post. (Tx to Macwolf Macwolfs Post). Unzip it to your desktop.

 

 

 

1 - Bootoption -s (SingleUserMode)

 

2 - mount -uw /

 

3 - cd /System/Library/CoreServices/loginwindow.app/Contents/MacOS/

 

4 - mv loginwindow loginwindow_old

 

5 - cp /Users/USERNAME/Desktop/loginwindow /System/Library/CoreServices/loginwindow.app/Contents/MacOS/

 

6 - chown -R root:wheel loginwindow

 

7 - chmod -R 755 loginwindow

 

9 - reboot

 

(Thx to a1k0n)

 

To fix the "lauchd:com.apple.nibindd:" issue, boot from the uphuck 1.3 and install only the AppleACPIPlattform package. This should help. Don't forget to fix permissions.

 

10.4.10 runs perfect for me, about this Mac works (with the new old loginwindow)

 

MfG, Rakete

 

Edit: fixed some minor mistakes... sry^^

loginwindow.zip

Share this post


Link to post
Share on other sites

installed after 10.4.9 DVD installation, didn't have to replace any old extensions or kernel, works perfect

Share this post


Link to post
Share on other sites

From 10.4.8

I just deleted all the .kext files (network,sound , graphic card) then i installed 10.4.9 , 10.4.10 -> installed the kext files and now everything work.

 

But if i didnt remove the kext files before i updated to 10.4.10 then i got kernel panic.

 

/sry for my bad english

/jompiz

Share this post


Link to post
Share on other sites
Hardware: Asus P5P800se, GeCube Ati X 1600 Pro 256 MB, 2 GB-Ram DDRI

JAS 10.4.8 and JAS 10.4.9 Update --> worked

 

It seems to work, but after 10 or 15 minutes using, it give an information, I have to shut my Computer down or to reboot. Any idea, why? Thx for help. I did install 10.4.10 update Installer.

 

 

the problem could be on board lan.

the marvell crashes with new kernel (8.10.1).

 

I have the same mainboard and i solved istalling a pci 10/100 via card.

 

good luck.

Share this post


Link to post
Share on other sites
It didn't work for me :thumbsup_anim: still a hang at blue screen.

 

On a GMA950? Sounds like you didn't replace the Framebuffer-kext with an older version.

Share this post


Link to post
Share on other sites

I haven't tried replacing the kernel or adding the extention yet but the upgrade works pretty well. I lost sound, but I got that back. I also reinstalled the loginwindow from the 10.8 disk. It worked fine. I am still trying to get core imaging on my gma900. I installed the optional graphics kext, which did nothing and had no info about what they are for. So, I tried installin the 10.8 gma900 by JAS. This let me pick a good resolution but says that 915 kext fails to load, seek newer version from vendor, so still no core support. Any know what I need to do?

Share this post


Link to post
Share on other sites

Okay, I need a bit of help! And advice!

 

I have never had success updating an OS, ever. It always ended up with me having to reinstall the OS then all the programs again, normally getting a new DVD that is out there.

 

 

So, that being said, I did find the 10410 update installer and I need to know a few things....

 

1) I presently have core/CI and DUAL DISPLAY running fine on 10.4.8

2) I read here that some need a new DVD that is out there with this UPDATE? Is that true?

3) Can I just use this update and will it hose my system? In the past, any installers I have tried, (10.4.6 to 10.4.8 for example) always ended with me having to reinstall the whole OS by finding the latest DVD out there.

 

Thanks!

Share this post


Link to post
Share on other sites
Not sure if copying Intel950.kext is really necessary, I am using the 10.4.10 kext here without any problems.

Recovering the old AppleIntelIntegratedFramebuffer.kext is *very* important however before rebooting.

 

 

OK thanks, I wasn't sure about that one so never tried it with the 10.4.10 version. It seems that both would work and that this step is therefore unnecessary.

Share this post


Link to post
Share on other sites

I've lost the sound on my ConRoe945 since I moved to 10.4.10.

I tried to reload the Azalia audio patch from uphuck DVD but it still does not work

any idea?

Share this post


Link to post
Share on other sites
I've lost the sound on my ConRoe945 since I moved to 10.4.10.

I tried to reload the Azalia audio patch from uphuck DVD but it still does not work

any idea?

 

I`ve got the same problem here on my p5w dh deluxe.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×