jai kr Posted April 28, 2007 Share Posted April 28, 2007 Hi firends, I have downloaded the MAC OS X 10.4.6 but i am not able to install it. Please tell me can i able to install the MAC OS X 10.4.6 in the following configuration SATA HDD INTEL 865GBF motherboard INTEL P4 2.8GHz Processor 512MB DDR RAM and suggest me what should i do to make it install, i want to use the MAC. thanks in advance. Link to comment Share on other sites More sharing options...
tilc Posted April 28, 2007 Share Posted April 28, 2007 Hi. I think you cannot use OSX on a non-apple configuration, or if yes... than must use lots of tricks and stuff... Good luck! Link to comment Share on other sites More sharing options...
Oracle67 Posted April 28, 2007 Share Posted April 28, 2007 10.4.7 worked perfect on my hardware. You need: 1. A prepatched OSX 10.4.7 install image. 2. An empty dvd recordable (+R or ñR, NO Rewritable!). 3. An IDE Disc. The guide: 1. Get an prepatched OSX 10.4.7 install image. 2. Burn the image to an empty dvd recordable (+R or ñR,NO Rewritable!) >> Use your favourite burn program for this (Recommented Nero Burning Rom or Alcohol 120% or MagicISO or PowerISO e.t.c.) >>Make sure that S.M.A.R.T. is disabled from Bios configuration. >>Use IDE Disc and IDE Drive,Jumpers seted like master and slave on the same primary chanel. >>Use PS/2 Keyboard and Mouse. 3. Insert the OSX install disk and reboot your computer, follow the installation steps on your screen. >>Chose Language and after that chose Tools>DiscUtility and Delete and give a name to your Disc, close DiscUtility after that. >>Chose Customize on the Instalation menu and be careful what you chose (you dont need all the languages support, X11 tools, all Printers Drivers). >>Chose all Intel related updates and kexts. Link to comment Share on other sites More sharing options...
Recommended Posts