How to setup 10.4.8 under SATA RAID

[hel]

Anyone can describe how to setup 10.4.8 in step by step guide for novice?

In general, if is it possible that all next hardware will work in 100% of functionality?

If so, I'd like to move to study Mac World.

 

I have:

Pentium D 3.2 GHz/Intel 82801GB Serial ATA/~Ultra ATA Controllers

Graphics/TV out: NVIDIA GeForse 7300 GS + 512 MB Video Memory

Sound: Realtek High Definition Audio - and I use Skype with mic,headset

Webcam:  Logitech "QuickCam for notebooks pro" (mic,built-in)

DVD-RAM/RW(First Master port): HL-DT-ST DVDRAMGSA-4167B

Screen: ViewSonic 17" TFT

USB OEM MS Keyboard

USB OEM MS Mouse

Disks(3,4 Master ports): 2x SATA ST3250824AS 250 GB

Ethernet: Marvell Yukon 88E8053 PCI-E Gigabit

Modem: U.S. Robotics 56K Voice Host Int

Printer/Scanner/Copier: Brother MFC-210C USB

USB MultiFormat Storage Card (4 ports)

I do not have floppy and instead use flash sticker or SD Cards.

I do not use serial,parallel ports at all.

 

Thanks and I will apreciate any knowledge and help!

[C0mputerNick]

Well first you can check here to see if your hardware is listed:

http://wiki.osx86project.org/wiki/index.php/HCL_10.4.8

 

if its not, it doesnt mean it wont work you will just have to try it and see.

 

There are alot of step by step guides here:

http://wiki.osx86project.org/wiki/index.ph...allation_Guides

 

There really isnt a need for a guide if your hardware is supported.

you just stick in the DVD and it will install just like any other OS.

 

If you have problems getting something to work you can ask the forum for help

and check here first:

http://forum.insanelymac.com/index.php?showtopic=34080

 

I have tried to help several of my friends get OSX running on their own hardware, even told them what to get,

but its not for the faint of heart, you cant be afraid of editing files or digging into the forum and wiki and do alot

of research and reading.

 

With all the people on this forum chances are your questions have already been asked and answered you

just have to find them.

 

I must say that ive had no success with a raid of any kind for my boot drive (i wish i could get it working)

but i have yet to find a card or an on board controller that will work.

 

But even if you cant get raid to work, you can still try to get it going with a single drive and do what i did,

which was to install a pair of drives in my machine and make them into a raid afterwords. which i use that for

ripping dvds, downloads, photoshopping etc. This is all with software raid through apples disk utility. you

just have a seperate drive on your desktop. not a big deal for me though.

 

Hope this gets you started.

 

Nick

[hel]

O!

Thank you a lot!

But I do not understand where get info about model name of my motherboard?

At least in system information I did'nt find anything.

And what is that titan? Where can I get the soft?

About RAID; I want to get worked in the matrix RAID (0+1) on pair disks, that is system info on RAID0 and my info on RAID1.