Yashi problem during installation

[xantek]

Hello, I've a 10.4.8 patched version of Mac os and i would install on my desktop PC,

so I create a new partition and rebooted with the installation DVD, but

my PC just restart when loading the unix system without write the error and before loading the UI,

so i check the DVD on a friend 's laptop and it can reach the installation UI :sbav:

 

I checked in the HCL and i can't find what the problem is,

 

so I hope someone good here could leave me a hand in this my adventure..

btw, sorry for my english but is not my native language.

 

HWINFO32 report that I've this hardware:

 

motherboard /Chipset:

DFI K8M800(-MLVF) INFINITY / VIA K8M800-K8N800 CE+ VT8237®

 

processor : Sempron 3100+

 

Graphics card:

nVidia GeForce4 MX 4000 (NV18) AGP 8x 128Mb DDR SDRam

 

audiocard:

via ac97

 

and I can see that the motherboard is supported,

the cpu have the sse2 extension so is *should* be supported

I think the problem is the Graphic card,

someone could help me?

[xantek]

I tried different method of boot up,

tried with

mach_kernel -x -v platform=X86PC "Graphics Mode"="1024x768x32@75"

(dvd says that I've a vesa 3.0)

 

but it reboot just after writing

Starting OSX[i cant read because is too fast]

..

just before loading the frame buffer device and changing resolution..

[xantek]

I just finish installed a 10.4.6, now i search for a bootloader like gag or grup because i installed osx past the 1024 sector,

I keep you informed .

[xantek]

ok,work with the chain0 methods,

don't recognize the wifi cards(D-Link Airplus G) so i completely offline..

and gave me a playback error with dvdvideo..

but for it works just fine, now i must make my wifi card works..