Jump to content
InsanelyMac Forum
koumed

error : You need to restart your computer. Hold Down the Power button for several seconds or press the Restart button.

Recommended Posts

yeah man i also got this problem ia cant even go to the install menu when i boot the it tells me this error please guys tell me

 

have been working on this for long time

 

i have struck in this win xp it sucks man :whistle::thumbsdown_anim:

 

I got

Intel Pentium D950 Stepping:C1

3400.2 MHz (current clock speed: 3400.2 MHz)

64+32-Bit (Intel EM64T), Hyperthreading (2 Threads)

MMX, SSE, SSE2, SSE3

Intel Corporation D102GGC2 AAD42789-204(motherboard)

1021.6 MB Ram

Nvidia 7300gt 512 mb

 

Hard disk

80 gd ide samsung

80 gb sata segate

 

Samsung dvd rw

Share this post


Link to post
Share on other sites
Advertisement
Even i had the same problem so i installed without natit or titan and i could boot viola!!

P.S. : Did this on my old system AMD 3200+ (939) nforce4 mobo (nvidia 6100 Built in) + PCIe 6600 256mb

 

hey mac r0cketman, do you remember if you had 3d acceleration working

with your nvidia 6600 card?

i can boot all fine, can change resolutions and everything, but once i try

to run anything like ivisualize 1.6 (plugin for itunes with bits of 3d stuff

going on), the display window turns black, the cpu load goes up a ways,

and i can work on any program, even itunes, just the visualization doesn't

work. same with some torrent tool that supposed to show some 3d swarm

or other (wanted to see that - no go). i got the nvidiaNV40.pkg and installed

that. graphics are crisp, just that i don't think i've got real 3d running.

 

seeing how i'm running a pentium m based system, i cannot yet run ver 7

of itunes due to the "out of memory" bug (with 1.5g ram in the box...)

 

have yet to test that renderbench thing (cinebench or whatsitcalled)...

Share this post


Link to post
Share on other sites

it seems the nvidia 6600 is the problem, no qe/ci available dammit. why is

that? what's so different with these cards than say regular 6600gt cards?

on pc based systems it doesn't matter... doh

Share this post


Link to post
Share on other sites

Guess what? I had this problem too :(

 

I used the latest patched JaS 10.4.8 DVD that I found on a newsgroup on a Dell Inspiron 8600 (Pentium M, Nvidia Go5650 = NV31M)

Installed everything that seemed appropriate options (no ATI drivers and such, but did tick the NV40 package) and it was running with flying colours. :)

 

Then I downloaded MacVidia 1.0.8 and got this dreaded screen :( . Since I was just starting I reinstalled OS X and all is well.

I used a spare harddrive and tried MacVidia 1.0.81 and again this screen. So I guess it's MacVidia not working for me.

(I have 3 harddrives now: XP, OS X and a testdrivedrive!)

 

Also on the subject of graphics cards - anyone got a copy of Titan? The Omni site seems to be down :huh:

 

Marc

Edited by barchetta

Share this post


Link to post
Share on other sites

Could someone please post their screen shot of the computer with -v?

 

If it happened to be the panic of Natit/Titan, delete every kext that's associating with GeForce , that's how I fixed my panic.

 

How? connect your HDD to another MAC, set the jumper of the HDD that has the problem to slave, then navigate to the extension folder, and start deleting the kexts. Cleanup the trash using secure empty. Reboot.

 

Hope this helps

 

Guess what? I had this problem too :worried_anim:

 

I used the latest patched JaS 10.4.8 DVD that I found on a newsgroup on a Dell Inspiron 8600 (Pentium M, Nvidia Go5650 = NV31M)

Installed everything that seemed appropriate options (no ATI drivers and such, but did tick the NV40 package) and it was running with flying colours. :thumbsdown_anim:

 

Then I downloaded MacVidia 1.0.8 and got this dreaded screen :( . Since I was just starting I reinstalled OS X and all is well.

I used a spare harddrive and tried MacVidia 1.0.81 and again this screen. So I guess it's MacVidia not working for me.

(I have 3 harddrives now: XP, OS X and a testdrivedrive!)

 

Also on the subject of graphics cards - anyone got a copy of Titan? The Omni site seems to be down :huh:

 

Marc

 

Here: http://www.necnet.de/krass.man/Installers/...tit_Uni_1.0.pkg

Edited by Apple Freak

Share this post


Link to post
Share on other sites

I thnk I got the same thing

 

I downloaded Mac.OS.X.v10.4.8.AMD.Intel.SSE2.SSE3_by.JaS.iso

 

During the installation i doscovered that it is beta 2. After successful installation the computer asked me to restart. However when I restarted it told me this:

'panic(cpu 0 caller OX0039C213): Unable to find driver for this platform "ACPI".

 

Me:

CPU Intel P4 2.80 478 Socket

Asus P4P800-x

1 Gb Ram

ATI Radeon 9600 Series

 

Please Is it possible to solve it somehow?

Share this post


Link to post
Share on other sites

I've got this problem after installing Intel 2200b/g wifi drivers.

 

So, I've disabled the wifi adapter by switching off the hardware through the laptop button.

 

I thing that its related with bad hardware compatibility or bad drivers. (in my case, iwi2200 is not fully operational.)

 

 

songlfly.

Share this post


Link to post
Share on other sites
I've got this problem after installing Intel 2200b/g wifi drivers.

 

So, I've disabled the wifi adapter by switching off the hardware through the laptop button.

 

I thing that its related with bad hardware compatibility or bad drivers. (in my case, iwi2200 is not fully operational.)

songlfly.

 

I think it's a problem with hardware to, but, in my case, I don't understand what is the problem.

I have this dmesg:

 

hi mem tramps at 0xffe00000

PAE enabled

enabling INTEL features

standard timeslicing quantum is 10000 us

vm_page_bootstrap: 253253 free pages

mig_table_max_displ = 71

Enabling XMM register save/restore and SSE/SSE2 opcodes

ACPI CA 20051117 [debug level=0 layer=0]

AppleIntelCPUPowerManagement: ready

AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled

AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled

PASSED! ...maximum protection of commpage set ALL

Copyright © 1982, 1986, 1989, 1991, 1993

The Regents of the University of California. All rights reserved.

 

using 5242 buffer headers and 4096 cluster IO buffer headers

Enabling XMM register save/restore and SSE/SSE2 opcodes

Started CPU 01

IOAPIC: Version 0x20 Vectors 0:23

ACPI: System State [s0 S3 S4 S5] (S3)

Security auditing service present

BSM auditing present

disabled

From path: "uuid",

Waiting for boot volume with UUID 845997BC-1D8F-387B-9D05-DE48F39DED1E

Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>

USBF: 11.677 Attempting to get EHCI Controller from BIOS

USBF: 11.678 USBLEGCTLSTS value c0000000

USBF: 11.680 Found USBLEGSUP_ID - value 0x1010001 - writing OSOwned

AppleIntelPIIXPATA: Secondary PCI IDE channel is disabled

USBF: 11.952 EHCI - Ownership conflict - attempting hard reset ...

USBF: 11.954 EHCI - Force BIOS Ownership to 0

USBF: 11.955 acquireOSOwnership done - value 0x1000001

Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/ST98823AS Media/IOFDiskPartitionScheme/Untitled 1@1

BSD root: disk0s1, major 14, minor 1

USB caused wake event (EHCI)

Jettisoning kernel linker.

Resetting IOCatalogue.

GFX0: family specific matching fails

display: family specific matching fails

Matching service count = 2

Matching service count = 4

Matching service count = 4

Matching service count = 4

Matching service count = 4

Matching service count = 5

GFX0: family specific matching failsdisplay: family specific matching fails

 

GFX0: family specific matching failsdisplay: family specific matching fails

 

ApplePS2Trackpad: Synaptics TouchPad v6.2

GFX0: family specific matching failsdisplay: family specific matching fails

 

GFX0: match category IOFramebuffer exists

IPv6 packet filtering initialized, default to accept, logging disabled

com_apple_driver_RTL8139: Ethernet address 00:16:d4:9f:16:80

display: Not usable

Share this post


Link to post
Share on other sites
I've got this problem after installing Intel 2200b/g wifi drivers.

 

So, I've disabled the wifi adapter by switching off the hardware through the laptop button.

 

I thing that its related with bad hardware compatibility or bad drivers. (in my case, iwi2200 is not fully operational.)

 

 

songlfly.

 

No. i don't have any wifi adapter. only tv tuner. but i don't think it is the reason. i tried different schemes. i put ticks for all, then just to some points like inter sse2. then i select only essential points. the same. that stupid problem with darwin and its monkey, which I am now.

 

My problem again 'panic(cpu 0 caller OX003A802F): Unable to find driver for this platform "ACPI".

Edited by alabanco

Share this post


Link to post
Share on other sites

Have you installed the patches for your system? On Jas DVD there are some files you need to install (Intel or AMD patch).

Share this post


Link to post
Share on other sites
Have you installed the patches for your system? On Jas DVD there are some files you need to install (Intel or AMD patch).

 

I have downloaded this iso image Mac.OS.X.v10.4.8.AMD.Intel.SSE2.SSE3_by.JaS.iso

from emule. It is 4.7Gb. I thought that it is already patched?

 

In the list of points to install there are:

Essential System Software

Printer drivers

Additional fonts

Language Translations

x11

Jas Intel 10.4.8. ATA kexts included

Jas AMD 10.4.8. ATA kexts included

Support fot the most common hardware

Natit Nvidia Support

Edited by alabanco

Share this post


Link to post
Share on other sites
No. i don't have any wifi adapter. only tv tuner. but i don't think it is the reason. i tried different schemes. i put ticks for all, then just to some points like inter sse2. then i select only essential points. the same. that stupid problem with darwin and its monkey, which I am now.

 

My problem again 'panic(cpu 0 caller OX003A802F): Unable to find driver for this platform "ACPI".

 

 

I have downloaded this iso image Mac.OS.X.v10.4.8.AMD.Intel.SSE2.SSE3_by.JaS.iso

from emule. It is 4.7Gb. I thought that it is already patched?

 

In the list of points to install there are:

essentials (or so)

additional languages

x11

AMD SSE2

Intel SSE2

Printers drivers

and support for other hardware

 

Install only the Intel Patch... If you want I saw there is a new version of Jas DVD 10.4.8 on the Pirate Bay.

Share this post


Link to post
Share on other sites

when it installs Jas Intel 10.4.8. ATA kexts the computer stops and asks to install again. Perhaps this iso is bad. But I have no more emotions to download another iso. Its too huge. 4.7Gb. Too pity.

Share this post


Link to post
Share on other sites

If you have the Jas DVD 10.4.8 you are ok, some hardware configuration has this problem (mine has to).

In my case the notebook whit OS X is really fast, only when I shutdown or restart it, I see that error screen.

You can try the new updated dvd... I think I try it :rolleyes:

Share this post


Link to post
Share on other sites

Hi I was having the same issue.  I am using a dell optiplex gx240 with a P4 2.ghz sse2 and 1gb ram.  I just installed a nvidia fx5500 with 128mb. I had a radeon with 32mb of ram that didnt work.  I followed one of the suggestions earlier to remove some kexts.  I removed the geforce and nvidia ones.  After that the system came up all the way and I was able to enter username and stuff.  My ethernet does not work nor does about this mac, but at least it is up.  The sound seems to work though as well as usb and it seems to reconize the firewire card but I have not tested it yet.  

 

thanks for all the help.  I will add to this if I get anything else working.

 

Thanks again.

Share this post


Link to post
Share on other sites

I ve updatet from 10.4.6 to 10.4.8 with the egwan patch.

I didnt clicked patches in the options. So it would just install semhex kernel.

I have kernel attack to:

panic (cpu 0 caller 0x001A2ECF): kernel_trap(0x40db884) with 64 bit state

Debugger called: panic

 

What should i do now?

Share this post


Link to post
Share on other sites
I installed successfully the Mac OSX on my computer :

Intel Pentium 4 CPU 2.40GHz (MMX,SSE,SSE2)

Motherboard ASUS P4 B 533

DDRam 256MB

NVIDIA GeForce4 MX 440 with AGP8X 64MB

 

but when i restart my computer to start MAC OS X I get an error : You need to restart your computer. Hold Down the Power button for several seconds or press the Restart button.

 

I have same problem.

 

But

When i change my Display Adapter from Geforce4 MX 400 AGP8X 64MB to Geforce FX5700LE.

New Install JaS 10.4.8 Intel/AMD SSE2,SSE3 PPF1 .... again

It's OK. :)

Share this post


Link to post
Share on other sites

Maybe it's the problem is the Display Adapter, I got Geforce4 MX 400 AGP8X 64MB too, so I'm gonna change it and retry to install the new dvd, and I hope i will resolve the problem :)

Share this post


Link to post
Share on other sites

I ran into the same problem and every post I have read leads me to believe this is due to the display driver (or extension--I am new to the mac world). I finally fixed it by deleting the Geforce.kext file. You can find this flie in the file in /system/library/extensions folder. Just drag it to the trash.

 

Prior to deleting the file I was able to boot up by holding down the shift button and selecting OsX from the boot menu and then keep it held until the gray apple screen comes up. Once you are in you should be able to delete the file. Give it a shot and see if it works for you.

Share this post


Link to post
Share on other sites
Maybe it's the problem is the Display Adapter, I got Geforce4 MX 400 AGP8X 64MB too, so I'm gonna change it and retry to install the new dvd, and I hope i will resolve the problem :thumbsup_anim:

 

press F8 When you start

type -v

u can see your problem (fail with Geforce4)

 

everybody....

can you help me, How to delete Geforce4 Driver ?

and Replace with other Driver.

 

tell me step by step please.

Thanks for your kind.

 

Sorry, My english is poor.

Share this post


Link to post
Share on other sites

I replaced my Display Adapter with GeForce2 XD, nothing changes, I knew it, it's the same driver =)

Share this post


Link to post
Share on other sites

Im currently having the same problem with my Toshiba laptop with nvidia gf4 mx440 go and 1.7 p4m. i did do the nvidia patch. im currently reinstalling it without the nvidia patch. JaS 10.4.8 dvd btw.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.



×