ufulu Posted January 8, 2007 Share Posted January 8, 2007 (edited) My experience installing JaS's new patched 10.4.8 DVD on a Samsung X20 1.6GHZ SSe2 with a built-in intel GMA 900: 1. Installed JaS 10.4.7 with the "GMA900" support enabled on a virgin HFS+ Volume. 2. Installed the patched JaS 10.4.8 DVD without clicking any of the “supported hardware” stuff !!! 3. Manually installed the 10.4.8 GMA900.pkg from the patched Jas 10.4.8 DVD. 4. To get QE & CI enabled: Fix permissions for the AppleIntel915.kext: In Terminal navigate to /system/library/extensions/ Then Chown –R root:wheel AppleIntel915.kext Chmod –R 755 AppleIntel915.kext Delete Extensions.kextcahce & Extensions.mkext in /system/library/extensions/ Then Reboot Voila! QE & CI should now be enabled! Enjoy your new system with QE & CI and the 8.8.1 Kernel! Edited January 8, 2007 by ufulu Link to comment https://www.insanelymac.com/forum/topic/38078-install-jass-new-patched-1048-with-881-kernel-and-get-qe-ci-enabled/ Share on other sites More sharing options...
WiteWulf Posted January 9, 2007 Share Posted January 9, 2007 Thanks Ufulu...this is looking like a fix for my Dell Optiplex GX280. Just need to get the onboard Broadcom NIC or my Intel EtherPro working as well, now, and I'm laughing. Link to comment https://www.insanelymac.com/forum/topic/38078-install-jass-new-patched-1048-with-881-kernel-and-get-qe-ci-enabled/#findComment-271851 Share on other sites More sharing options...
spaceboy Posted January 11, 2007 Share Posted January 11, 2007 hi ufulu! my hardware: Acer Aspire 3628AWXMI : CPU: Intel Pentium M (740) SSE2 / 1.700 MHz / RAM: 1024 MB / HDD: 60 GB / Display: 14,10 WXGA (1280 x 800) / GPU: Intel GMA 900 ID2592 / Modem, LAN 10/100, Wireless LAN Intel 2200BG your tutorial looks interesting! I have only one problem. I have installed 10.4.8 / 8.8.1 with gma900 patch. I have to plug in a external monitor to get it started. no problem so far. The first time the notebook booted after the installation QE was enabled (wave effect) ... now i updated the ACPI bundle to get the battery status display to work and now QE is disabled. I followed your tutorial and navigated to the /system/library/extensions but there is no file like AppleIntel915.kext only: ... AppleIntelGMA950.kext AppleIntelGMA950GA.plugin AppleIntelGMA950GLDriver.bundle AppleIntelGMA950VADriver.bundle AppleIntelIntegratedFramebuffer.kext ... System Profiler shows: Intel: GMA 900 / ID: 0x"2592" on win xp everest shows me the GPU device description: Intel 82910GML/915GM(S) GPU Codename Alviso-GM I am confused a little bit at the moment. THX for help!!! Link to comment https://www.insanelymac.com/forum/topic/38078-install-jass-new-patched-1048-with-881-kernel-and-get-qe-ci-enabled/#findComment-273568 Share on other sites More sharing options...
loris Posted January 18, 2007 Share Posted January 18, 2007 Hi there, someone knows if the GMA900.pkg is needed also for intel 915gm? Ta Link to comment https://www.insanelymac.com/forum/topic/38078-install-jass-new-patched-1048-with-881-kernel-and-get-qe-ci-enabled/#findComment-278567 Share on other sites More sharing options...
fahrenheit Posted January 18, 2007 Share Posted January 18, 2007 Hi there,someone knows if the GMA900.pkg is needed also for intel 915gm? Ta Intel 915GM is the system chipset which includes the GMA 900 onboard graphics card. Link to comment https://www.insanelymac.com/forum/topic/38078-install-jass-new-patched-1048-with-881-kernel-and-get-qe-ci-enabled/#findComment-278572 Share on other sites More sharing options...
Colonel Posted January 18, 2007 Share Posted January 18, 2007 You need the GMA 900 package or the 915 kexts for GMA 900 to work. Link to comment https://www.insanelymac.com/forum/topic/38078-install-jass-new-patched-1048-with-881-kernel-and-get-qe-ci-enabled/#findComment-278580 Share on other sites More sharing options...
loris Posted January 18, 2007 Share Posted January 18, 2007 Ok, now my GMA 900 is working... but after the steps above i have booted in a grey display whit the rainbow wheel :-((( my pc was dead! After booting in safe mode (holding the shift key durig the boot) I got a message saying that AppleIntelIntegratedFramebuffer.kext was not loaded ---> well: Just replace the 10.4.8 AppleIntelIntegratedFrameBuffer.kext with the one from 10.4.4 (also on JaS 10.4.6/7 DVD). n Terminal: sudo -s cd /System/Library/Extensions mv AppleIntelIntegratedFrameBuffer.kext AppleIntelIntegratedFrameBuffer.kext.original cp -r /where/you/have/the right/AppleIntelIntegratedFrameBuffer.kext AppleIntelIntegratedFrameBuffer.kext chown -R root:wheel AppleIntelIntegratedFrameBuffer.kext chmod -R 755 AppleIntelIntegratedFrameBuffer.kext cd .. rm Extensions.* reboot Max resolution = OK QE = OK CI = OK PS: Admin or Moderators ... coul you rectify my bad english so that everyone can understand ;-) Link to comment https://www.insanelymac.com/forum/topic/38078-install-jass-new-patched-1048-with-881-kernel-and-get-qe-ci-enabled/#findComment-279019 Share on other sites More sharing options...
Aluminum Sponge Posted February 22, 2007 Share Posted February 22, 2007 (edited) G'day to All !! I would like to know if this procedure to activate QE/CI would apply on an Intel 865G integrated graphics controller chip? Also, I will be performing a fresh install of JaS's new patched 10.4.8 DVD on a separate partition. Do I need to actually install JaS 10.4.7 DVD then update it to "JaS.10.4.8.AMD.Intel.SSE2.SSE3.v1p.and.Deviant.patch" or can I start at Step 2? Lastly, I am curious as to the significance of manually installing the GMA900.pkg POST install versus during the booted JaS 10.4.8 DVD install? Thanks! Intel Celeron D (SSE3, No NX) Intel 865G chipset Edited February 22, 2007 by MacProCD310 Link to comment https://www.insanelymac.com/forum/topic/38078-install-jass-new-patched-1048-with-881-kernel-and-get-qe-ci-enabled/#findComment-308710 Share on other sites More sharing options...
mutahir Posted March 3, 2007 Share Posted March 3, 2007 Hi All, How can we manually install the GMA900 Package from the patched JAS 10.4.8 DVD? I have installed the patched 10.4.8 jas dvd but no QE and CI, also in the extensions folder it shows GMA950 Kexts, no GMA 900 kexts are found. Any help? Regards Link to comment https://www.insanelymac.com/forum/topic/38078-install-jass-new-patched-1048-with-881-kernel-and-get-qe-ci-enabled/#findComment-315834 Share on other sites More sharing options...
dre2kse Posted March 9, 2007 Share Posted March 9, 2007 I installed the GMA950.pkg at 10.4.8 install. I have no QE or CI. Does anyone know what I need to get this working? Do I have to follow Ufulu steps precisely? I notice he only installed GMA900.pkg. Also does anyone know how to add this package manually? Link to comment https://www.insanelymac.com/forum/topic/38078-install-jass-new-patched-1048-with-881-kernel-and-get-qe-ci-enabled/#findComment-319865 Share on other sites More sharing options...
mcdull Posted March 9, 2007 Share Posted March 9, 2007 do not use the one from jas.dvd. use this one. DiaboliK.GMA900.Fixer.pkg Link to comment https://www.insanelymac.com/forum/topic/38078-install-jass-new-patched-1048-with-881-kernel-and-get-qe-ci-enabled/#findComment-319875 Share on other sites More sharing options...
grantjohnston Posted September 25, 2007 Share Posted September 25, 2007 Toshiba M55-S135. Got everything working that I use frequently (Sound, WiFi, etc.). I have an onboard Intel GMA900 and following the multiple guides that are out there, I still have no avail on being able to adjust my resolution, period. Using the driver on the DVD (Which I can see, is broken) gives me a light blue screen after the grey screen with the Apple logo. After changing ownership on the .kexts in /System/Library/SystemConfiguration it won't leave the grey screen. I wind up getting a cursor that I can move around, but it never gets past that. I haven't tried the "paperclip trick" as I'm not exactly fond of running the chance of frying everything. Even with trying 'function + external monitor key', I get nothing. Anyone's input on this subject is greatly appreciated. Also, if you need any more info fro me, let me know! Thank you!! Grant Link to comment https://www.insanelymac.com/forum/topic/38078-install-jass-new-patched-1048-with-881-kernel-and-get-qe-ci-enabled/#findComment-456378 Share on other sites More sharing options...
Recommended Posts