Jump to content
133 posts in this topic

Recommended Posts

16 hours ago, miliuco said:

Not on my system, runs fine without crash.

 

But boot loader is always Clover despite I have OpenCore now.

@Slice I have created a PR, not sure if it's the fix for boot loader issue.

Strange... but I didn't change anything in this field.

OK, accepted the PR.

Thank you!

  • Like 2

@Derty

 

@Slice app gets dGPU name from /Users/<usuario>/.ath/scr.txt, created when app runs. Do you have 6750 or 6600 in this file?

 

This info is got from the command system_profiler SPDisplaysDataType. When you run this command, do you get 6750 or 6600?

 

1 hour ago, miliuco said:

@Derty

 

@Slice app gets dGPU name from /Users/<usuario>/.ath/scr.txt, created when app runs. Do you have 6750 or 6600 in this file?

 

This info is got from the command system_profiler SPDisplaysDataType. When you run this command, do you get 6750 or 6600?

 

ok is correct.

I understand that changing the board after the system has been installed does not update this data, file?

 

Graphics/Displays:

    AMD Radeon RX 6600 XT:

      Chipset Model: AMD Radeon RX 6600 XT
      Type: GPU
      Bus: PCIe
      PCIe Lane Width: x16
      VRAM (Total): 8 GB
      Vendor: AMD (0x1002)
      Device ID: 0x73ff
      Revision ID: 0x00c1
      ROM Revision: 113-V502MECH-2OC
      Metal Support: Metal 3
      Displays:
        PHL 328E9F:
          Resolution: 2560 x 1440 (QHD/WQHD - Wide Quad High Definition)
          UI Looks like: 2560 x 1440 @ 60.00Hz
          Framebuffer Depth: 30-Bit Color (ARGB2101010)
          Main Display: Yes
          Mirror: Off
          Online: Yes
          Rotation: Supported
          Connection Type: Thunderbolt/DisplayPort

 

1 hour ago, miliuco said:

@Derty

 

@Slice app gets dGPU name from /Users/<usuario>/.ath/scr.txt, created when app runs. Do you have 6750 or 6600 in this file?

 

This info is got from the command system_profiler SPDisplaysDataType. When you run this command, do you get 6750 or 6600?

 

the command get

 

Graphics/Displays:

    AMD Radeon RX 6750 XT:

      Chipset Model: AMD Radeon RX 6750 XT
      Type: GPU
      Bus: PCIe
      Slot: Slot-1
      PCIe Lane Width: x16
      VRAM (Total): 12 GB
      Vendor: AMD (0x1002)
      Device ID: 0x73df
      Revision ID: 0x00c0
      ROM Revision: 113-67KA6SCD2-L01
      Metal Support: Metal 3
      Displays:
        PHL 328E9F:
          Resolution: 2560 x 1440 (QHD/WQHD - Wide Quad High Definition)
          UI Looks like: 2560 x 1440 @ 75.00Hz
          Framebuffer Depth: 30-Bit Color (ARGB2101010)
          Main Display: Yes
          Mirror: Off
          Online: Yes
          Rotation: Supported
          Connection Type: Thunderbolt/DisplayPort

 

  • 2 weeks later...
On 1/16/2025 at 11:50 PM, D-an-W said:

@Slice can the main box be made slightly wider so it fits the name of my GPU on please?

 

Screenshot2025-01-16at20_48_27.png.91675dae984c0a4bb4a96f685490bff9.png

Is it OK?

https://github.com/CloverHackyColor/About-This-Hack/releases/download/1.0.5/About.This.Hack.app_ext.7z

  • Like 3
  • Thanks 1
  • 2 weeks later...
5 minutes ago, ANTIKO said:

ฝั่งคุณมีปัญหาอะไรไหมครับ ผมไม่มีปัญหาแบบนั้นครับ

 

That's right, yours has no problem, but mine has a problem with the name V.2.0.2(1603). It has a problem showing the Mac Pro model name incorrectly. How can I fix it? The previous model had no problem, but it doesn't show the RAM value like the new model.

  • Like 2
5 minutes ago, naiclub said:

Все верно, у вас проблем нет, а у меня проблема с именем V.2.0.2(1603). У него проблема с отображением имени модели Mac Pro неправильно. Как это исправить? У предыдущей модели проблем не было, но она не показывает значение RAM, как новая модель.

If someone else confirms your problem, then there is an application problem (I think so), otherwise, where is your error?

  • Like 2

Yes, there seems to be an issue with the MacPro7,1 model.
In my case, it is displayed as "Hackintosh Extreme Plus (MacPro7,1)" which changes within a few seconds to "iMac (Retina 5K, 27-inch, 2020)". Cursor is busy (and app is unresponsive) while changing Mac model.
Version 2.0.2 (1603).

 

Spoiler

MacPro.thumb.png.6a961349cae0483c8c2b456279537db9.png

 

Edited by miliuco
Typo
  • Like 2
6 hours ago, Max.1974 said:

:เครื่องบิน:

 

  เปิดเผยเนื้อหาที่ซ่อนอยู่

Captura de Tela 01-02-2568 ถึง 00.55.18.png

 

  เปิดเผยเนื้อหาที่ซ่อนอยู่

แคปตูเรดลา2025-02-01s00_56_20.png.d60ab9ef289e5eb32b0f49f41e90f295.png

@naiclub 

 

  เปิดเผยเนื้อหาที่ซ่อนอยู่

Captura de Tela 01-02-2568 ที่ 00.58.33.png

Hi friend, can you please tell me where I am having problems? I tried booting with Clover 5161 and it is the same.

Spoiler

2568-02-0117_30_47.png.e859bb7ca4528309c703aeb02e220e92.png

 

 

  • Like 1

@Slice

It's clear for me that we are talking about the original fork.

It would be helpful if when we talk about ATH we clarify which fork we are talking about.
This issue that I have mentioned and also @naiclub happens with the Mac model is from the latest version of 2009-Nissan-Cube.

 

@naiclub

Try the version linked below, tell me if the MacPro7,1 model is displayed as it should. To see if I can locate the cause of the error.

 

https://we.tl/t-4lzWoPQmxO

 

  • Like 1
6 hours ago, miliuco said:

@Slice

It's clear for me that we are talking about the original fork.

It would be helpful if when we talk about ATH we clarify which fork we are talking about.
This issue that I have mentioned and also @naiclub happens with the Mac model is from the latest version of 2009-Nissan-Cube.

 

@naiclub

Try the version linked below, tell me if the MacPro7,1 model is displayed as it should. To see if I can locate the cause of the error.

 

https://we.tl/t-4lzWoPQmxO

 

Spoiler

2568-02-0209_40_24.thumb.png.a6ef82ea4465293bf212fc740fd2b9a0.png

The version you sent can be used. The one in the middle.
Thank you very much.

46 minutes ago, miliuco said:

@naiclub

Vale. Pero veo que Apple UEFI es el gestor de arranque. La máquina no es una Mac real, ¿verdad? Supongo que hay problemas en esta última versión de ATH. 

Curiously, this version does hide the serious thing in a real way, which does not happen with the official version or the one compiled by ourselves. I leave a photo of the analysis

 

image.thumb.png.80a8cdf5daf8e8b87c79e1d7f6167a12.png

 

Reviewed the new build has already solved the issue of hiding the serial

Edited by kaoskinkae
  • Like 1
8 minutes ago, miliuco said:

@kaoskinkae

Tampoco me gusta que la última versión permita ocultar y mostrar el campo de texto del gestor de arranque, al igual que lo hace con el número de serie, no veo la necesidad de ocultar el gestor de arranque.

When I compiled the version I checked what they said and I thought it was a programming error, I even left a comment on the subject. I think that hiding opencore or in the case of clover is to hide that it is a hackintosh, mysteries of life.

  • Like 1
×
×
  • Create New...