enzomusic Posted December 8, 2006 Share Posted December 8, 2006 Hi at all, I just DL'd the demo of Traktor DJ Studio 3.2 UB (now just renamed Traktor 3). So I installed, tried to configure it on a hackintosh but I get no sound. (Realtek onboard, works in system and Logic) On the MBP it works perfectly. I configured Standard Output in SysPrefs, tried 2 channel and 6 channel, but in the Audio Properties of Traktor 3 it shows up 2 normal devices, and 2 sp-dif ones. Well, so I tried both of the normal devices, but no channels were available. Am I using the wrong audio kext? (Cuz in Logic makes no probs) Are some users of you experiencing the same problem? Looking forward to an answer of you. Greetz [eNZO] Link to comment Share on other sites More sharing options...
Simania_NL Posted December 17, 2006 Share Posted December 17, 2006 I'm having the exact same problem, but I got a C-media something internal soundcard with my ASUS P4C-800-E Deluxe motherboard. Just don't get it, sound is fine with iTunes and all other apps, but somehow Traktor is just not finding any attached speakers or headphones. Here's a screenshot: If there's anybody who got Traktor 3 working with an internal soundcard, I would be more then interested!! Link to comment Share on other sites More sharing options...
enzomusic Posted December 18, 2006 Author Share Posted December 18, 2006 Hi again, I figured out that traktor 3 (the old PPC one) finds the soundcard and can playback... well, stutter. So maybe it's a restriction from NI? Hmm... will keep you informed, if I know more. Greetz eNZO Link to comment Share on other sites More sharing options...
Simania_NL Posted December 23, 2006 Share Posted December 23, 2006 Hi again, I figured out that traktor 3 (the old PPC one) finds the soundcard and can playback... well, stutter.So maybe it's a restriction from NI? Hmm... will keep you informed, if I know more. Greetz eNZO Well I made a PPC version of the 'new' universal traktor 3, with: ditto -arch PPC. But it doesn't find the soundcard...... Maybe you can also try to make a PPC version and report back. Link to comment Share on other sites More sharing options...
enzomusic Posted December 26, 2006 Author Share Posted December 26, 2006 Hi again. Finally I found a working solution. I think the problem is that TDJS 3 setup makes this virtual port like it should, but because we all have an SP-DIF output, the setup routine configures the new virtual output to the SP-DIF instead to route it to the PCM device. Maybe the Setup is fault, or any internal number given by the driver to the audio devices. Well, here is the solution how to add a Virtual output: Open Finder. Go into "Utilities" and double-click the "Audio MIDI Setup" icon. In the menu choose "Audio" and "Open Aggregate Device Editor". There you'll find 2 lists. Aggregated Devices and the real ones. Click on "+" to create a new virtual. Choose a name, and your PCM output device (it's the one where a number greater than 0 is shown is the "Out"-row). Just press done and close the program. (Btw. You cannot set any preferences for the virtual device but you also don't need to.) Last step, open up TDJS 3 and choose the new virtual device in the audio settings. Set your channels and now let's rock and spin the turntables. Greetz, Merry X-Mas and a Happy New Year eNZO a.k.a. Dee-J Van Guard PS: Please excuse my bad english, but I've been making party and I drank a bit too much alcohol, but without I wouldn't be able to present you a solution. Link to comment Share on other sites More sharing options...
Simania_NL Posted December 28, 2006 Share Posted December 28, 2006 Enzo I'll try it out on saturday, if it works you've made my day...... .I'll let you know if it works. Btw. your english isn't bad at all, considering you drunk many beers and in the end the beer pointed you to a solution Link to comment Share on other sites More sharing options...
Simania_NL Posted December 31, 2006 Share Posted December 31, 2006 Man you made my newyear!!!! It workes like a charm, many many thanks. LET'S SPIN THE WHEEL, WHOOOOOOOOOOOOO Link to comment Share on other sites More sharing options...
DaSeGe Posted January 2, 2007 Share Posted January 2, 2007 Is there a way to get the Scratchamp to work?? I have up on runnin Traktor 3.2 on the OSX system. No Problems with the AC97 soundcard. Also i´ll get the Scratchamp over Firewire to work, but when i choose it on Traktor 3.2 the System Crashes down. I have it all running on my Notebook Intel Centrino 1.7, 1 GB Ram, ATI X700 and OSX 10.4.3 with Whesley Patch. Any ideas???? Or is there a problem with the OS, is the Marklar Patch better then Whesley??? Please help, i hate to work on the WINXP platform, it sucks because no SoundFlower support. Link to comment Share on other sites More sharing options...
djrumbu Posted September 22, 2007 Share Posted September 22, 2007 i have kind a the same problem, i selected the outputs, and it work but it does not sound, i can play with traktor but no sound!! logic pro 8 work beautyfull. idn't know what it is Link to comment Share on other sites More sharing options...
Recommended Posts