Success Installation but Random Freezes - H.Sierra 10.13.4 Ga_x58_ud3R

[iceage2609]

i recently updated to High sierra from sierra and finally succeeded after a few attempts. Everything seems to work fine but i am getting random freezes.I am on 10.13.4 .

 

When it happens i can't move mouse-keyboard anything,even restart the PC.The HDD led is on and i have to long press power button to reboot my system.
My Hackintosh : Ga_x58_ud3R - Corsair 10Gb Ram XMS3 1600 - Gainward GeForce GTX 285 1024 MB and an intel i7 920

I uploaded my config.plist -dsdt.aml and a system log at the time of the crash.

if any of that helps to define the cause of the crash. Thanks in advance.

My efi/clover/kexts/other includes FakeSMC.kext - Lilu.kext - NullCPUPowerManagement.kext - realtekALC.kext- RealtekRTL8111.kext - USBInjectAll.kext - WhateverGreen.kext

To be honest i am not an expert so i don't know if all that are needed.
Please any help would be great.

 

P.S: I read over the internet from a post that the problem solved after adding these lines to config.plist , but adding them to my plist make clover configurator pops up an error Please fix the following code before saving: Found non-key inside <dict> at line 427 and some other lines. Why is that ?

<dict>
                <key>Comment</key>
                <string>External Drives as Internal to fix Orange Icons</string>
                <key>Disabled</key>
                <false/>
                <key>Find</key>
                <data>
                RXh0ZXJuYWw=
                </data>
                <key>Name</key>
                <string>AppleAHCIPort</string>
                <key>Replace</key>
                <data>
                SW50ZXJuYWw=
                </data>
            </dict>
            <dict>
                <key>Comment</key>
                <string>fix I/O error for ICH10</string>
                <key>Disabled</key>
                <false/>
                <key>Find</key>
                <data>
                RYX2D5XCiciD4P5mhcl4D4TSdQs=
                </data>
                <key>Name</key>
                <string>AppleAHCIPort</string>
                <key>Replace</key>
                <data>
                iciD4P5mhckPmMFBCMyQkJCQdQs=
                </data>
            </dict>
            <dict>
                <key>Comment</key>
                <string>fix I/O error for ICH10</string>
                <key>Disabled</key>
                <false/>
                <key>Find</key>
                <data>
                icglQGACAD1AIAAAdQyB4b9///+Ji1EBAAA=
                </data>
                <key>Name</key>
                <string>AppleAHCIPort</string>
                <key>Replace</key>
                <data>
                kJCQkJCQkJCQkJCQkJCQkJCQkJCQkJCQkJA=
                </data>
            </dict>

 

files.zip

[iceage2609]

1 hour ago, Hervé said:

If you don't know how to apply those fixes, don't even attempt it, especially if you work on your existing Clover config file and not a dedicated/test one! You risk corrupting your current config and find yourself unable to boot High Sierra...

 

Get id of NullCPUPowerManagement, you don't need it and, as its name implies, it suppresses all CPU SpeedStep which is, obviously, not desired.

With Lilu, you're expected to use AppleALC, not that RealtekALC you've mentioned.

 

Try the attached alternative config file. Place it alongside your current config and call it from Clover main menu: Options->Configs.

config_test.plist.zip

Thank you very much for answering, i removed RealtekALC and NullCPUPowerManagement , move AppleALC instead into kexts/other of the efi/clover directory and try with the plist kext you’ve uploaded and worked great.

 

It’s a test drive for now,  to see how it’s rolling and then move from sierra which i am using now.

Side by side i had a lot of useless lines :-) 
 

I will check next days for those random freezes,it’s the only issue now,everything else seems fine.

Thanks again