Jump to content
Krani93

Stuck on Attempting System Restart.. MACH Reboot |Opencore OSX Catalina

6 posts in this topic

Recommended Posts

Hi guys,

 

I'm trying to install Catalina on a Lenovo m720q (i5-8600T with B360).

After some other issues I'm know stuck at attached screen.

Im using latest opencore version and have my EFI folder attached.

 

Can someone help me I've got no clue what to try next :/ 

 

 

Cheers!

IMG_7077.jpg

EFI.7z

Share this post


Link to post
Share on other sites
Advertisement

I've checked your EFI folder. It seems like you have left the legacy drivers in that folder.

Also, there's a shell.efi file there which seems unnecessary.

Try removing those and check.

Share this post


Link to post
Share on other sites
18 hours ago, SniperBuddy said:

I've checked your EFI folder. It seems like you have left the legacy drivers in that folder.

Also, there's a shell.efi file there which seems unnecessary.

Try removing those and check.

Thanks! I've removed NvmExpressDxe.efi, AppleUsbKbDxe.efi and XhciDxe.efi and deleted shell.efi. still same message though.. any other idea?

Share this post


Link to post
Share on other sites

yes, I have, system is a tiny form factor desktop pc though not laptop 

Edited by Krani93

Share this post


Link to post
Share on other sites

I also faced this problem. Solved this by following the Intel Framebuffer patching present here - https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md

 

You can swap the 0xXXXXX code into ProperTree's data form by using this tool - https://www.scadacore.com/tools/programming-calculators/online-hex-converter/

 Make sure to use the DCBA version.

Edited by SniperBuddy
Updated HEX swapping site.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SniperBuddy
      Hello guys,
      I'm relatively new to the world of hackintosh.
      I'm trying to install the latest Mac OS - Catalina with the help of Opencore, however, this is the error that's displayed while booting from the USB:
       
      https://drive.google.com/open?id=1Xd4V2wZ2fEsgRyfVcXlJHXMPGa85g2s3
       
      You can take a look at my config.plist file from here - https://drive.google.com/file/d/17FZpTcVp4RFSaxdm6yW4uELkt7MaLdmt/view?usp=sharing
       
      I'm using the Acer E575 G laptop with Kabylake (i5 7200u)
       
      Any help would be gladly appreciated!
       
      Edit: I've fixed this problem by following this guide completely - https://khronokernel-2.gitbook.io/opencore-vanilla-desktop-guide/intel-config.plist/kaby-lake
       
      This is due to OpenCore being unable to find any drives with the current ScanPolicy, setting to 0 will allow all boot options to be shown
       
       
       
       
       
       
       
    • By DanZiRuleZ
      Dear All, 
       
      trying to install Catalina on my ASUS Z87 Plus, I followed the Haswell guide to the letter, all set up now, USB stick boots ok, Catalina installs on SSD, but then when trying to boot it I am receiving Kernel Panic and no idea how to move forward. 
       
      Have the debug options, but opencore will only dump boot messages where I don't see much sticking out.
       
      My last resort would be just installing clover on the already installed SSD's EFI partition, it at all possible. High Sierra is working fine and I did get Clover with Mojave once but stuck with High Sierra with my GTX960 video card...
       
      Attached is the kernel panic and my EFI setup if anyone can help me troubleshoot.
      Many thanks
      D.
       

      EFI.zip
    • By n.d.k
      After several weeks of testing OC bootloader,  disecting its source code and also Clover's source code as well, I finally switch from Clover to OC as my main bootloader. Wait! don't get the wrong idea that OpenCore is better than Clover. They both work equally well, producing a bootable macOS as an end result with simliar boot time. OC design direction is different with Clover, I believe it's not intended as a Clover replacement, but more narrowing down to macOS specifically. However, macOS is not the only OS that i am using, so, i decided to add some minimal necessary source code modification to the OC to get some of the features I need. I like to share my customized OC forked https://github.com/n-d-k/OpenCorePkg , you have to compile it yourself if you want, i will not provide pre build binary.    
       
      Additional features/changes:
      ============
       
      [ Multi-Boot ]
        - ACPI patches are optional for non macOS with setting ACPI->Quirks->EnableForAll to yes (default is no).
        - Booter Quirtks, SMBIOS and Device Properties patches will only applied to macOS.
          
      [ Hotkeys ]
        - Full functional Hotkeys [1-9] corresponding to Boot Entry's Index number and dedicated W (Windows) / X (macOS) keys can be used without seeing Boot Picker.
        - While in boot picker, F10 can use to take a snapshot of the screen.
                
      [ Ui Boot Picker ]
        - Bios Date/time, auto boot to the same OS or manual set to always boot one OS mode, and OC version are displayed in boot picker.
        - Auto boot to previous booted OS (if Misc->Security->AllowSetDefault is NO/false).
        - macOS Recovery/Tools Entries are hidden by default, use Spacebar in Boot Menu as a toggle on/off to show/hide hidden entries.
                
      [ Custom Entries ]
         - Custom entries are now listed first in picker menu and by the orders they are appeared in Misc->Boot->Entries, before all other entries.
         - Ability to change entry name found by auto scanner by adding custom entry with the exact same device path,
           this will give users the option to complete change how all boot entries listed in Boot Picker.
          
      [ Others ]
         - No verbose apfs.efi driver loading (if using apfs.efi instead of ApfsDriverLoader.efi).
          - ndk-macbuild.tool script are set to compile with latest edk2 (One can easily set to stable edk2 if prefer).
          - NvmExpressDxe driver build script are also available for system without native nvme support. (Compatible with OC and Clover).
       
      Usage:
       - To build OpenCore, run "./ndk-macbuild.tool" at Terminal (require Xcode and Xcode Command Line Tool installed, and open xcode to accept license agreement before compiling).
       - To build NvmExpressDxe driver, run "./buildnvme.sh".
       
      4k screen resolutions

       
       

       
      Customized by @btwise

       
       
       
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9600K, 9700K, 9900K, 9900KS
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Nitro+ RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.3
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      CLOVER EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      Use this folder with fully patched DSDT
      Current EFI 
      Updated 04/02/2020
      EFI Update - 04/02/2020 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
      AG Clover Z390 Master Navi Vega EFI.zip - Vega, Navi (5700, 5700XT), Radeon VII DSDT EFI
      AG Clover Z390 Master Polaris EFI.zip - RX5XX Polaris DSDT EFI
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's & Older EFI’s (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      Alternative EFI - OpenCore No DSDT and Done the way OpenCore intended it (04/02/2020)
       

      Alternative EFI 2 - N-D-K Fork of OpenCore (04/02/2020)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
      • Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       
       

       

       

       

       

       

       

    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Pro and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Pro, 9900k with a Vega 56 but has also been tested and verified fully working with the following Hardware using Catalina 10.15.3
       
      CPU's
      8700k, 9600k, 9700k, 9900k
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install.
       
       
      HARDWARE USED
      • Intel I9 9900k 
      • Gigabyte AORUS Z390 PRO
      • Sapphire Nitro+ SE Vega56 (connected to monitor with DisplayPort)
      • Corsair Vengeance Pro RGB 16GB @3200mhz (2 x 8GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit. 
      • CoolerMaster MASTERLIQUID ML360R RGB CPU Cooler
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.3
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       

       
       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar
       
       
      CLOVER  FOLDER
      Use this folder with fully patched DSDT
      Current EFI 
      Updated 14/02/2020
      Z390 Pro Navi Vega Clover EFI 140220.zip - Use with Bios revision F12d Only (14/02/2020 Vega, Navi (5700, 5700XT), Radeon VII DSDT EFI)
      Z390 Pro Polaris Clover EFI 140220.zip - Use with Bios revision F12d Only (14/02/2020 RX5XX Polaris DSDT EFI)
      HD630 Z390 Pro F12d EFI 140220.zip  Use with Bios revision F12d Only (14/02/2020 IGPU Only EFI) SMBIOS MacMini 8,1 
       
      PLEASE NOTE - Please flash your motherboard bios to revision F11 to use my current EFI. It’s a major rework of the bios and vital changes have been made to the layout and power tables. New DSDTs have been created and installed into the new EFI’s but will not work correctly with any other bios revision.
       
      Latest Gigabyte Z390 PRO BIOS (F12d)
      mb_bios_z390-aorus-pro_f12d.zip
       
       
      CFG Unlock (MSR) F12d BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      DSDT's & Older EFI’s (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      Alternative EFI - N-D-K Fork of OpenCore (16/01/2019)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      Clover
      Clover Configurator
      Kext Updater
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      FakeSMC    (Can be used instead of VirtualSMC)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F12d)
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
      • Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup 
       
       
      SCREENSHOTS

       
       

       

       

       

       

       

       

       

       

       

       
       
       
×