RubyRose Posted January 17, 2020 Share Posted January 17, 2020 Hello. I ask for help already from despair). My problem is that I fundamentally need to install an OS X image on VMware. But with the condition that you can run iMessage on it (for the weMessage server), and this is obtained only by changing parameters such as System-id, ROM, MLB, which can not be changed through a normal system image, except for editing via Clover. Thus, I tried for a long time to make a bootable flash drive in order to use it on a virtual machine. I did it today. Using BDutility, I made a bootable USB flash drive and launched clover via the BIOS of the system image on the vm. At first, everything was fine, I did it. But after the reboot, everything stopped working. Apparently something happened to the config. At first I only saw 1 error "stall x86platformplugin". After changing some parameters in clover, I removed this error, but got a few new ones. The situation at the moment is as follows: kextd stall (60s) "AppleACPICPU", "IOHDACodecDevice", "IOResources". I don't know what can be changed, given my situation with the need for a vm. I went through a lot of things that I found on the forum, but nothing helped. Please help me. I throw off the contents of the bootable flash drive. clov.zip Link to comment Share on other sites More sharing options...
Recommended Posts